Lightroom :: Slow Loading Previews During Selection Process
Jun 14, 2012
When I am sorting photos in the library loupe mode, the thumnails always show loading as I am trying to make my pics and rejects. How to speed up the process? I have already increased my cache to 100.
I have pictures on an external hard drive that are imported into my catalog. One folder ( out of many) when called up do not show previews when in Library. If I choose develop, the pictures appears and so does the preview. When I try to backup , I get an error message that my preview cache is having a problem. All other folders have good previews.
I've seen this topic on the threads, but mostly for previous versions. I have LR4, and my previews load so slowly. How can I speed them up? Bridge handles the previews so fast and it is so much nicer going through with that program, but I'd like to move my workflow to LR4 solely. But hard to with the preview handling being so much slower.
My LR 5 is as slow as a snail generating those previews.
Importing my RAWs form the EOS 6D (saved on a 95MB/s 32 BG SanDisk Extreme Pro) it renders only the 12 or 24 displayed previews and leaves out the rest (the next only when I'm scrolling down). For 12 images LR5 needs 8-10 seconds. LR4.4 does the same process for all 150 RAWs in 1-2 seconds.
It doesn't matter if I want to import to my workstation (Dell Precision T1650, 8core Intel Xeon E3-1240 V2, 16GB RAM, 64bit) via USB 3.0 (Reader & Port) or to my laptop (Dell Latitude E6400). So it must be LR, not my hardware.
Are there known issues with the Canon-RAW format? I just updated EOS firmware to 1.1.3, but the renderspeed stays the same. For 1 image 3-4 seconds single...
Preview panel "preview" freezes indefinitely.App very slow to load while creating new previews. (previews take forever to create and update)Wrong previews showing for wrong images when swapping between folders, etc. (ie: all photos, last import, custom collections) This one is a little different...
Ratings lost when switching between folders, etc. (ie: all photos, last import, custom collections) This was a clean install that ran beautifully at first. Started noticing this more and more after using the spot tool. (my last step in processing a job)
I use separate catalogs per job. Some as small as a few dozen images. (family stuff) Others, as large as 500-600. (engagement and wedding clients)
Since starting to use LR in 2009, I've been making separate catalogues for every 6 months worth of photos. I've now decided to consolidate all my photos in a single catalog, but the process is taking forever, even though I'm not moving the photos, just importing edits/previews/ratings/collection etc.. How to speed things up.BTW, all of my catalogs have been converted to LR4 format.
What is the process used to delete unwanted catalogs from the listing that comes up when loading LR 4? Any web article on the general subject of deleting unwanted catalogs?
I'm currently working on a site which is almost 95% complete. The loading time for the site is approx 7-10 seconds which seems to be slow. I have placed a preloader but that doesn't seem to be coming up while the site is loading.
Is there anyway to speed up the loading time. Like some code that will tell it load specific number of frames first and then load the rest in the background?
I have compressed the images that are being used but cannot compress further as they may lose the quality.I've got the preloader working and now it seems to be showing up while the site is loading. Is there any way to speed up the loading time.
We have about 25 workstations on our partner company, with the exact hardware and software configuration. We have 2 workstations with problem, but the other 23 are fine. The problem is those 2 is taking to long when loading.
I tried to load the program without loading template (startup to 0) it loads fine. The problem starts after it loads template or existing file. I can tell it's not the file problem, because after we open a file successfully, any other file after that opens normally. So there must be another process after loading the first file.
I suspected there is an addon program that cause this. Is there a way we can see what processes are running on command line (like in Windows command console), so we can find what cause this?
I think this might also because they are using ACAD MAP3D 2010, which are not certified for Windows 7 64bit on their machine.
We do a lot of 3D texturing for models. While CS6 was doing that just fine, CC has a problem. When we paint on 3D model directly, it has a 0.5-1 second lag. That's acceptable, as it's not used much. However from CC it started to lag even when painting directly on unfolded texture. Which basically interferes with our job.
It seems that there is no applying step anymore when switching from flat texture to 3D view and all changes are applied on 3D immediately when we paint on flat texture. Release notes say it's a 100x speed improvement, but we don't really see it. We see this behaviour on 2 computers: OS X one and Win8 one.
So my question is - can we turn immediate change applying on 3D model off?
We have an issue where one of our users are struggling with very poor performance during the pre-render stage.
This is especially clear during the following stages
Press "Render" button (takes around 20 second before anything happens)
Pre-Processing scene (takes around 20 second to complete)
Translation Scene & Translation Object (takes around 7 minutes to complete)
This is runned on a HP Z800 workstation with pretty hefty specifications, and a Nvidia GTX 580 graphic card. What is weird is that the user also has another machine with a bit lesser specs and a GTX 295 graphics card that finishines these same tasks using the same files around 6 times faster.
The machine shows no sign of a general performance issue, and when it eventually reaches the rendering stage it performs as expected.
Using 3DS Max 2012 SP1 and Win7 64bit on both machines
Photoshop CC is loading slow. I dont have much loaded.I am running it with MagicPicker 3, it wont save the tool the way I left it. Digital Heavens tool panel (easy to run actions)AD_Artbox, that now wont run the tools - panel to run actions. It did before the update.
I was wondering if there are some Photoshop filters which are very slow in processing images.
For example images of 0.2GB, 0.5GB, or even 1GB can be processed in few seconds with all filters? Or there are some filters requiring a longer time, something like minutes?
problem with loading large numbers of images, not large images, but a lot of images in VS11. I am loading a lot of images to make my annual slide show for the HS band and I am running into a problem where the images start loading quickly (1 second each) and after about 150-200 images you start to load slower and slower as much as 70 seconds on image #300). I don't remember having this issue with VS9, which is what I used last year.
I tried loading the same thing in VS10 and it is much better on the load. There is a recognizable slow down, but nothing like VS11. Before you ask, I would be fine with doing the slide show in VS10, but running in Vista VS10 crashes on me too much to get it done.
I have: AMD Athlon 64x2 Dual Core Processor 6000+ 3.0 GHz. 3 Gig's Ram. 32 bit Windows Vista Home Premium. Photoshop CS3 Extended.
It takes 20 Seconds+ to open a jpg or to create a new file even 50x50 pixels. Loading the actual program is very quick though. I have a network printer, but I set Microsoft XPS Document Writer as my default.(Its a local printer) I Run PS CS3 as admin and with compatability for xp sp2.
Photoshop C3 has been loading even the smallest of photo files very slowly -- about 10-15 seconds for one.
it might be a networked printer, but the printer on this computer is NOT networked.
I'm running Windows XP, latest update, with 3 gig of RAM. And we have deleted and reloaded the Photoshop program and updated it to make sure it's not a file goober in the program.
I am working with Adobe Edge to create an HTML5 website. My problem is the website load very slow because it downloads all images before browser render the web. Is there any configuration or code change to make the image load after click or mouse over event?
Got a new Windows 8.1 PC. Successfully transferred all photos (about 12000) to the new hard drive. When I open Photoshop and use "get photos from files and folders", I can locate the pix but when I try to import them, the process starts then stops without bringing any to the organizer.
Just deleted PR4, and installed PR5.Opening an existing project takes an extremely long time (maybe 20-30 mins? guessing here)The Smoke loading screen shows something like "Connecting Control Surfaces"..
I did notice that zoom in or out in camera raw is slow , even in middle pc , i'm not talking about hi end pc but i did find it's amazing fast if use process 2003 or 2010. May i use like default the 2003 or 2010 ? How can i do it?
We have 13 machines that are identical hardware and software; Windows 7 and the Autodesk Product Design Suite 2012 as well as the Vault 2012 Client. Two of these machines are exhibiting the following behavior: Connected to our LAN with access to the internet not loading Vault on startup Inventor loads in 68 seconds.Disconnected from our LAN with no access to the internet not loading Vault on startup Inventor loads in <10 seconds. I have tested this with our AV turned on and off with no changes in the above noted behavior. These two machines loaded Inventor 2011 in repsectable times ~<30 seconds.
Now this tells me that when Inventor is loading it is trying to go somewhere when there is a network connection. But where and what can I do to make it stop?
I have just upgraded from PSE10 to PSE12 and now when I use the Slide show (full screen) in organizer with Fujifilm Raw files it take about a minute and a half to load up and same again when you zoom in. Is there any way of speeding this up in PSE12? It was slow in PSE10, but it did take over a minute in total.
The text below is set in one conatiner, I want to recolor 28m 100y process to a PMS 130 Global swatch.
I select the type, use recolor artwork, and take the arrows off of everything except the 2nd color (which is 28m 100y). This is where I get stuck, how do I assign PMS 130 to be the destination color?
Tried clicking a few things and did not work, and if I try to choose document swatches, I get the error below.
I cannot use select >> same fill color, because the type is in one text container, and I need just the gold type selected (along with fills and strokes in the rest fo the document)
I was wondering if there might be a way to add the option to save a selection to the disk? when i work i create many selections with complicated shapes and areas.
since i need to use them more then once i was wondering if a feature for saving only the selection can be implemented ? this would enable me to load the selections to new projects and use them there making the same "print" every time.(my work around for this is saving a B/W picture of the shape then uploading it every time i need it , then copy and paste to a new layer
in the new project then selecting the shape area then flatting the image with the selection and deleting the internal area or the invert ) its long but works.if you can add "File Open into a NEW layer", this would save the need for part of my work around. i would then just load the save to the new layer and use it directly :-)
* This would be a great new feature anyway "File Open To a New layer" ... :-)
I saw this the save/load selection feature the other day in a photoshop presentation and was shocked that it's real :-)So if such feature can be added to paint.net even in version 4.0 it would be great and time saving too.
After a few hours of everything working perfectly, AutoCAD will suddenly decide to select objects slowly (for move, copy, trim, erase etc. commands). There will be a short time lag between picking a point on the screen and creating the selection box.
The problem is only rectified by switching off the pc and rebooting.
Periodically I am having problems selecting text! I will select my text tool and go to edit text and the type tool changes back to the selection tool. I have to fiddle around an click on different layers then go back to the type tool and then it will start working. I am not the only person in my company who switched to CS6 and is experiencing issues with this new program running slow. Switing from layer folders also causes thing to freeze up. I am running off a Mac Book pro with OS Lion 10.7.4. I uploaded CS6 just over a week ago.I only used the CS5.5 trial version so there should not be a conflicting problem with a CS6 trial version.
I have just upgraded from X3 to X5. In X3 when I would type some text I would then scroll through the different fonts and see which one I wanted to use. This was really quick. I simply cursored down through the list. X5 is very slow in changing from one font to the next. I'm having to match and select fonts in X3 and then paste them into X5 and continue my artwork.