Photoshop CC is loading slow. I dont have much loaded.I am running it with MagicPicker 3, it wont save the tool the way I left it. Digital Heavens tool panel (easy to run actions)AD_Artbox, that now wont run the tools - panel to run actions. It did before the update.
View 7 RepliesI'm currently working on a site which is almost 95% complete. The loading time for the site is approx 7-10 seconds which seems to be slow. I have placed a preloader but that doesn't seem to be coming up while the site is loading.
Â
Is there anyway to speed up the loading time. Like some code that will tell it load specific number of frames first and then load the rest in the background?
Â
I have compressed the images that are being used but cannot compress further as they may lose the quality.I've got the preloader working and now it seems to be showing up while the site is loading. Is there any way to speed up the loading time.
I have:
AMD Athlon 64x2 Dual Core Processor 6000+ 3.0 GHz.
3 Gig's Ram.
32 bit Windows Vista Home Premium.
Photoshop CS3 Extended.
It takes 20 Seconds+ to open a jpg or to create a new file even 50x50 pixels. Loading the actual program is very quick though.
I have a network printer, but I set Microsoft XPS Document Writer as my default.(Its a local printer)
I Run PS CS3 as admin and with compatability for xp sp2.
Photoshop C3 has been loading even the smallest of photo files very slowly -- about 10-15 seconds for one.
it might be a networked printer, but the printer on this computer is NOT networked.
I'm running Windows XP, latest update, with 3 gig of RAM. And we have deleted and reloaded the Photoshop program and updated it to make sure it's not a file goober in the program.
I have just upgraded from PSE10 to PSE12 and now when I use the Slide show (full screen) in organizer with Fujifilm Raw files it take about a minute and a half to load up and same again when you zoom in. Is there any way of speeding this up in PSE12? It was slow in PSE10, but it did take over a minute in total.
View 21 Replies View Relatedproblem with loading large numbers of images, not large images, but a lot of images in VS11. I am loading a lot of images to make my annual slide show for the HS band and I am running into a problem where the images start loading quickly (1 second each) and after about 150-200 images you start to load slower and slower as much as 70 seconds on image #300). I don't remember having this issue with VS9, which is what I used last year.
I tried loading the same thing in VS10 and it is much better on the load. There is a recognizable slow down, but nothing like VS11. Before you ask, I would be fine with doing the slide show in VS10, but running in Vista VS10 crashes on me too much to get it done.
I am working with Adobe Edge to create an HTML5 website. My problem is the website load very slow because it downloads all images before browser render the web. Is there any configuration or code change to make the image load after click or mouse over event?
View 1 Replies View RelatedJust deleted PR4, and installed PR5.Opening an existing project takes an extremely long time (maybe 20-30 mins? guessing here)The Smoke loading screen shows something like "Connecting Control Surfaces"..
View 9 Replies View RelatedWhen I am sorting photos in the library loupe mode, the thumnails always show loading as I am trying to make my pics and rejects. How to speed up the process? I have already increased my cache to 100.
View 2 Replies View RelatedWe have 13 machines that are identical hardware and software; Windows 7 and the Autodesk Product Design Suite 2012 as well as the Vault 2012 Client. Two of these machines are exhibiting the following behavior: Connected to our LAN with access to the internet not loading Vault on startup Inventor loads in 68 seconds.Disconnected from our LAN with no access to the internet not loading Vault on startup Inventor loads in <10 seconds. I have tested this with our AV turned on and off with no changes in the above noted behavior. These two machines loaded Inventor 2011 in repsectable times ~<30 seconds.
Now this tells me that when Inventor is loading it is trying to go somewhere when there is a network connection. But where and what can I do to make it stop?
my animation takes around two seconds to load within my browser. Is there a way to display a loading symbol such as spinning circle, that will show the animation is loading, then disappear once it is ready to display?
View 2 Replies View Relatedhow to make my photshop application fast few days ago it was working good but now its performance is slow and my computers speed is also slow. How to fix it?
View 1 Replies View Relatedtry to load Photshop 7, it goes through all the preliminaries and then the screen goes blank. thinking it was a program fault, I have reinstalled but all to no avail. What other fault could it be? I know it's getting on, as is the desktop,
View 1 Replies View RelatedI have joined Photoshop CC and it worked for a couple of hours. Now when I load it, when its loaded, it freezes and nothing works.
I have Windows 7 and plenty of computing power and disc space. I have tried reloading it 3 times plus signing off and on to my account.
cc locks up on loading
View 7 Replies View RelatedAllI am getting is a spinning circle in Creative Cloud. Photoshop CC is not loading.Â
View 2 Replies View RelatedWin 7 system. Fresh installation of CS6 from DVD. I did not install the beta previously. Photoshop CS6 64-bit loads and ACR imports images but Bridge in CS6 does not seem to load. I get the message "Waiting for Bridge CS6 ..." but nothing happens. I do still have CS5 installed but since CS5 works, I do not want to uninstall that to take a chance on CS6.
View 4 Replies View RelatedI'm trying to get my magazine ad to match the original as close as possible. The first ad I placed came back muddy and dark. So I had the magazine contact the printer they use to get an ICC profile for me that I could load as the working color space in photoshop to prepare my file. Im I doing the right thing here? Is my solution loading the same working color space as the printer and then prepare my file to get a more accurate print?
Assuming that this was my fix I installed the ICC profile they sent me and when I went to "Load" that profile from the "Color Settings" dialog window and surfed to the folder I saved the profile in it doesn't show up. At the bottom of the "Load" dialog window there is a "Files of Type" drop down arrow and the only two file types listed are .CSF and .PSP. No .ICC file type there.
i just upgraded from 7 to CS...looks good and would like to keep using it. Only problem is whenever i try to open my .psd files created in 7, i'm giving the message:
"Could not complete your request because the layer is not a valid text layer"
Is there anyway to overcome this, as i need to access all of last years work.
I only changed to CS as when 7 finished loading the fonts in the startup screen, it would jump back to windows and close PS?
saved a siggy or something as a JPEG, and lost all its layers, is there a way to get them back?
View 2 Replies View RelatedBut Yesterday it was working fine, but today it's not loading any images. I have tried to restart my PC, but still nothing.
View 11 Replies View RelatedHi, I've been sent the BETA version of CS4 and when it loads now I get a message saying "Some of the application components are missing from the Application directory, please reinstall the missing components."
I've uninstalled and reinstalled but to no avail.
I've been developing a script that uses 2 selections saved in a PSD file and have created various files with the selections saved while testing things. I would select an area in a tif, choose Save Selection from the Select menu and the dialog that displays allows me to name the selection into a new document. Select an area in a 2nd document, do the same thing and the dialog defaults to the same file into which the previous selection was saved. Worked great, many times. Earlier, however, I was all of sudden unable to save the two selections into the same document. When I created the two selections in separate documents and dragged a channel from one document to the other (to create the 1 doc with the 2 selections) Photoshop would then not allow me to load selections at ALL. Now, everything seems to be working as it should! I don't THINK I've changed anything and some of the files I used unsuccessfully earlier just worked!
View 4 Replies View RelatedI am trying to build a web gallery so as I can build a collage from a Word file, which has 450 photos in it
So far I have:
Stored all images in a Word document
Saved them as a web page layout
Opened a Photoshop document
Gone to automate, web page gallery
Selected as source the folder with the images
Selected as destination another folder (same drive)
Hit OK and Photoshop tells me “None of the source files can be opened by Photoshop”
As I have done this procedure before (using the same images) and it worked I can’t understand why it won’t have it now?
I originally had CS and upgraded to CS2 which I have used happily for the past 3 years. My computer went down recently and I have a ne replacement laptop w, ith Vista installed.I loaded CS2 and everything went well until I went to use it. Firstly a registration window appeared asking me to register ( I have already registered though? Whatever I do with the registration scrren I am then directed to an activation window where I am advised that I do not have user rights, I then click OK (the only option) and CS2 closes down.I have tried reloading the software etc and have loaded my original CS.
View 4 Replies View RelatedI open my CS2 and try to open an image, the image does not display in my work area but it displays in my layers menu, nav menu, etc... Is there a setting that was accidentaly changed or did something else happen. I tried uninstalling and reinstalling.
View 3 Replies View Relatedhow to load in new fonts from Windows to PS?
View 1 Replies View RelatedWhen I try to load up PS 7.0, it gets as far as "Initializng color preferences," and then just blinks off. I've rebooted and re-installed the prog, with no success.
(Obviously, or I wouldn't be here, yes?)
My ImageReady loads up fine, so I tried the "jump to" command to bring an image over to PS.
I get a response that it cannot jump because "Photoshop is not responding."
My OS is Windows 2000.
I just got PSCS4 after having previous versions back to PS6. I'm trying to load my plug-ins (such as those from Flaming Pear) but the program doesn't recognize them. I've re-downloaded all of them to make sure they're compatible, dropped them into the filters file, and checked the file path in preferences to make sure it's correct. When I open the program, only the default filters appear. None of the outside vendor filters will load.
View 4 Replies View RelatedI open any kind of file or when I create a new file it takes Photoshop at least 30 secs to open or create the file. I also have PS installed on another computer (with the same specs) where I don't have this problem.
why it takes PS so long to open/create files? I'm using a laptop with a Core 2 Duo processor and 2GB of DDR2 ram.
after a serious virus attack Photoshop CS4 stops loading at message "Measuring Memory".
View 5 Replies View Related