I open any kind of file or when I create a new file it takes Photoshop at least 30 secs to open or create the file. I also have PS installed on another computer (with the same specs) where I don't have this problem.
why it takes PS so long to open/create files? I'm using a laptop with a Core 2 Duo processor and 2GB of DDR2 ram.
very long image loading times when loading an image into CS6 from LR4.When I right click an image in LR4 and select edit-in CS6, CS6 immediately starts up, and loads. But after CS6 is fully up on my screen, I get a spinning ball first, then spinning white/grey circles, until my selected image appears within CS6.
I am operatinng with an iMac 27 2.8G with 8G of memory and using SL 10.6.8 I have about 300G of free space on my HDD.
I am currently having a little problem working with Photoshop: I am designing posters and other prints for a festival here, and we usually print the largest posters on A1 intl paper full color. That means working in a huge 300dpi file with quite a lot of layers.
The issue I'm having trouble with concerns the loading and saving of the files (the biggest ones are around 1.1GigaByte). Simply loading the file into PS takes over 5 minutes, slowing down my computer drastically. Saving the file in a .psd format takes even longer, over 10 minutes sometimes.
I doubt this is an issue with the computer, as it has reasonable specs and is only a few months old. So how to reduce the file size of these .psds and thereby optimize their loading time. Because working like this is extremely time consuming and unproductive...
I have an issue where an addin loads once the first time Inventor is opened. If the addin is unloaded and reloaded via the Addins dialog and no documents are open it loads once. If the addin is reloaded while a file is open is reloads twice.
I came to the conclusion it is loading multiple times because the it seems to go through the Activation method of the addin twice. When is the Activation method called during loading an addin?
Inventor Addins
FlowTools for Inventor
ilxButton Panel (Buttons for iLogic Rules)
I've had this problem since switching over to Premiere, and continue to have it since upgrading from CS6 to CC. I can't believe this is actually how Premiere is supposed to work. It's a global thing, not specific to a single project. But I'll use my current project as an example:
I have about 4 hours of media, mostly P2 Avc-Intra, with some R3D as well. Total number of media clips: around 2600.Every time I open the project, it takes a thoroughly horrific amount of time for the media to finish loading (as evidenced by the "Loaded" status message at the bottom of the screen, and the "Media Pending" screen display on still-pending clips). On this particular project, for example, it takes 12 minutes for the media to finish loading. It doesn't take many crashes or reboots per day before the re-loading process eats up a significant chunk of my billable hours.
I've tried having the media cache in the internal drive/Adobe/Common directory, and I've deleted that and set the media cache for the external Thunderbolt media RAID. Same results either way.
System specs: OS 10.7.5 iMac 2.7 GHz Core i5 20 GB RAM P Pro 7.1.0 (though, as I said, it has been like this in CS6 as well)RADEON 6770M
Hardware Mercury acceleration is not an option (grayed out), so that's turned off.Results are the same regardless of whether I have the RED Rocket card connected.
just started using Edge Animate. I have some experience with Flash and After Effect so the layout is pretty familiar to me. I have no background in coding so I am very happy that it generates codes for me.
My goal is to make a simple html5 site with links / embedded videos to my contents (500 and vimeo). I copied some codes used for Youtube embedding, sub'd the url with vimeo url, and it worked fine. I used a "play video" button on the main page to trigger loading the video page (see my code below).
It worked great the first time I clicked the button and went to the video page. However, upon returning to the main page, and click the "play video" button again, a duplicate copy of the video is loaded right below the video loaded upon first click. This occurs for as many times as I click the play video button.
From the image above you can see that "jquery" loaded twice @ 91kb = 181kbedge 1.5 loaded twice @ 102kb = 204kb aswell as the edge and edge actions files loaded twice and if i boot strap comps together the images are loaded multiple times aswell
View 1 Replies View Relatedmy animation takes around two seconds to load within my browser. Is there a way to display a loading symbol such as spinning circle, that will show the animation is loading, then disappear once it is ready to display?
View 2 Replies View RelatedI'm currently working on a site which is almost 95% complete. The loading time for the site is approx 7-10 seconds which seems to be slow. I have placed a preloader but that doesn't seem to be coming up while the site is loading.
Is there anyway to speed up the loading time. Like some code that will tell it load specific number of frames first and then load the rest in the background?
I have compressed the images that are being used but cannot compress further as they may lose the quality.I've got the preloader working and now it seems to be showing up while the site is loading. Is there any way to speed up the loading time.
I have a directory of 100 images in a directory that I am going to add to my online photo album. I want to run these images through some image optimization to reduce the size and enhance the colors. BUT, when I do this, the modified date of the image gets changed to the current date. My online photoalbum uses this modifed date as the pictures date. So after my pictures are all uploaded to my online photo gallery, the dates are not correct and pictures are not in any date order.
is there a way to tell photoshop to NOT update this date when modifying an image?
What are all of your processes for modifying images and tracking the actual image date?
I have a small niglling issue with my copy of Photoshop CS3 on Vista Ultimate 64 bit and I never use to get.
For the past several months I have had to click the PS icon (usually in my quick launch) several times before photoshop will actually boot up. Sometimes I can get PS to boot up on the first click, sometimes 2 (usually) but other times I have to click it bout 6+ times before I see the PS splash screen and it starts?
However, PS is doing something on this non-booting clicks, cos my Task Manager shows I have several processes of PS running, but they all use significantly less memory than the actual opened PS. So for example, if I had to click 6 times, the one that is open may be using 71k, but all the other ones will be using 4k, I then manually stop those processes and PS works fine.
This isn't a major problem cos I can get PS to boot and function as it is suppose to, but it its somewhat annoying when I have to keep doing this process everytime I want to run PS.
My specs (incase its needed) are:
Windows Vista Ultimate Retail x64
Intel Q9550 @ 3.6GHz
4GB PC2-8500 Corsair Dominator Ram
1x 150GB WD Velociraptor 10,000RPM HDD
1x 1TB Samsung F1 HDD
ATi 4870x2 2GB Graphics Card
Also, incase it matters, I have a copy of Flash CS3 installed too, both PS and Flash are 100% legimate copies.
I have had a problem with opening some PSD template files. It doesn't happen all the time and it doesn't happen with every template. All of the templates were downloaded as zip files and opened and saved using Photoshop CS 5 on a Windows XP PC. When this happens I am getting an error message to the effect that the file can't be opened as it was done in a different version of PS. When the files were saved, they were saved as PSD files and the compatibility check box is always checked. The thing is, sometimes the file will open and sometimes the same one won't.
View 2 Replies View RelatedUsing PS CS6 on WIndows 7 64. All drivers updated. When I set 5 copies in the print menu, with either PSDs, TIFFs, or JPGs, PS sends the same job five times rather than telling the printer to just make 5 copies.
This happens when using either the color laser or Epson R3000. This does NOT happen when using non-CS6 products. On a 25 print run, this takes an abnormally long time.What I HAVE found is that PS is NOT passing the information to the printer. In other words, even though I set PS to multiple copies, when I click printer options the number of copies has not been passed to the driver.
way to make more than one copy of a layer at a time? You can right-click on a layer and duplicate it once, but often I'd like to make several copies on different layers.
View 2 Replies View Relatedwhy certain filters are grayed out sometimes. I am creating an image right now and I want to apply a pixelate filter to a layer and it's grayed out along with brush strokes, artistic and a few others, yet a little over half of the filters are available.
View 1 Replies View RelatedI'm using a template for a cd sleeve. One half of it is upside down so to work on the other half I have to rotate the image. I will have to rotate the image a hundred times before the project is finished.
Does this affect the quality? If so, any workarounds for me?
I'm getting a message at odd times on my Mac. Using Elements 11. Pressing OK gets rid of the message
View 3 Replies View RelatedI am experimenting with radial gradients and also elliptical selections with feather applied later via de Refine Edge command.
View 5 Replies View RelatedI have this picture which was low res when I started working with and it looks horrible when I enlage it. I need to smooth the edges and enlarge it by 5 times it's size.
View 12 Replies View Relatedim just getting used to using PS and IR together although ive been using PS for a while and i wanted to know if one of the ways to have a faster loading image was to save it for web and lower its res or to actually create more slices and have the HTML generator create a table to load the image faster?
im trying to get the best load times for a 28.8Kbps modem load (setting the bar low to get best results).
I have just started using Photoshop Elements 10 after having worked with Elements 6 for some time. I cannot print the same image more than one time on the same page. It prints out on separate pages. I was able to print the same image several times on the same page with Elements 6..
View 1 Replies View RelatedI have photoshop elements 11 and want to know how to take the same photo and duplicate it three times next to eachother in the same frame and then be able to enhance the photos separately
View 3 Replies View RelatedAfter printing a photograph cannot print another. Error message: "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." have to close and reopen the program to print one more.
I have this program on my laptop as well where it does not have this problem. Have tried reinstalling but problem remains on my desktop.
I'm trying to make a very simple 20 second video clip of me hula hooping, and every 4 seconds, draw a circle around my hula hoop that remains there for the duration of the video. So at the beginning there will be 1 circle, at the end there will be 6. how to make one of these circles visible at a time. I've been googling and youtubing for the the past 2 hours.
View 1 Replies View RelatedWhy is the file so large when I have not made any changes? 1..is there any thing that can reset to keep the original file size? I am using CS6 and Lightroom 4
View 13 Replies View RelatedI have this file with multiple layers of text.
I want to print the file with these layers selected individually, so that if I have two text layers "Cow" and "Dog", I get two similar images with different text.
How would i automate this? It would take a lot of work to select each layer and save the files individually.
Exporting to Revel from organizer has failed several times.
View 4 Replies View Relatedhow can i print the same picture multible times on one page
View 1 Replies View RelatedSo they say if you save a JPG image lots of time, the image starts to lose information...
If I open up a JPG image in Photoshop, make some edits, then use the 'save as' command (using a lower quality setting), overwriting the current file open, will saving it again further compress the image that is currently open? Or does photoshop store the original file (when it was first opened) information until closed?
we are running photoshop 8 in a windows 7 environment, and are experiencing daily hangups, slow save and output times, and software crashs....are there any patches or hotfix downloads avail? or maybe just tweaking? I've search thru the "help" section and can't really identify any.
View 1 Replies View RelatedI have just built a new workstation and I am trying to make sure that I have the optimal settings in Max and the NVIDIA control panel to reduce my rendering times. How to configure optimal set-up for the following workstation. I have tried using both metalray and the advantage pack iray renders. However, when I use the iray it just keeps rendering forever and still looks very noisy or granulated.
System:
Running one Intel 5650 overclocked to 3.4 GHz
EVGA SR-2 Classified MB
(2) Nvidia Quadro 4000 cards
24GB RAM
(2) Crucial 128GB SSD (Raid 0) This is my boot drive
(2) 1 TB WD Caviar Black (Raid 0) for storage
(1) 1 TB WD Caviar Black for backa-up