I'm using a template for a cd sleeve. One half of it is upside down so to work on the other half I have to rotate the image. I will have to rotate the image a hundred times before the project is finished.
Does this affect the quality? If so, any workarounds for me?
very long image loading times when loading an image into CS6 from LR4.When I right click an image in LR4 and select edit-in CS6, CS6 immediately starts up, and loads. But after CS6 is fully up on my screen, I get a spinning ball first, then spinning white/grey circles, until my selected image appears within CS6.
I am operatinng with an iMac 27 2.8G with 8G of memory and using SL 10.6.8 I have about 300G of free space on my HDD.
I have just started using Photoshop Elements 10 after having worked with Elements 6 for some time. I cannot print the same image more than one time on the same page. It prints out on separate pages. I was able to print the same image several times on the same page with Elements 6..
View 1 Replies View RelatedSo they say if you save a JPG image lots of time, the image starts to lose information...
If I open up a JPG image in Photoshop, make some edits, then use the 'save as' command (using a lower quality setting), overwriting the current file open, will saving it again further compress the image that is currently open? Or does photoshop store the original file (when it was first opened) information until closed?
Is there a way to rotate an image (made of pixels) so it won't look like crap?
View 3 Replies View RelatedRecently I have started to get in to photography with my digital camera. I have noticed that if you rotate a jpeg 90 degrees or whatever that the file size goes down.
Is there anyway to stop this and if so, how?
downloaded the trial version of CS2. I scan a lot of images onto my computer. Naturally, the images stored in My Pictures are not entirely centered.
Is there any feature on Photoshop that would allow me to SLIGHTLY rotate an image
I was given a disc with 75 pictures on it to deal with. The images are scans of old photos, and many of them are scans of a whole page from an album. There is handwriting on many of the photos/pages that I want to keep intact.
My big problem is this: Many of the photos/album pages were scanned in a way that makes it neccesery for me to rotate/flip them into proper position. When I rotate them, the handwriting comes out backward/mirrored.
I kind of recall running into this before on an unimportant somethingorother I was working on, but since it wasn't important I left it be.
ive got a problem ive been rotating my original image around in a circle to create a cool effect, yet i want to rotate it back around with the front but how do i do that and keep the same scale. i was measuring the top rotation of of a certain part on the car and bringing it to that each time to keep it the same but now i cant since its not symmetrical
in short terms I need "Gap a" to = "Gap b"
I've been asked to produce a timeline to be printed 110cm deep by 410cm wide and wall mounted on Foamex.
The time line will be made up of individual panels - one for each year. 2010 / 2011 / 2012 / 2013 / 2014...
The reason for each year to be printed as a separate panel is to prevent 2013 being plonked on the end of previous years - hope that makes sense! (Each panel will be a summary of the year.)
Ideally I would like to design the timeline with a flowing background graphic so I would need to create the main background as one, then exactly crop each year panel to print individually.
What I'm unsure on is how best to crop each year including bleeds ect so when butted uptogether the design looks seamless.
I can create a rotating image with sevaral images in Photoshop? Much like a gif? Would this improve my page load time or would it be the same as loading a slideshow? Here is an example of what we wanna do
View 1 Replies View RelatedI got a file from a client, which, when I attempt to rotate it 90 degrees, it distorts elongated. And no, it doesn't matter whether I use PS, Illustrator, or InDesign.
View 7 Replies View Relatedhow to make a rotating animation (rotate an image) with image ready. I have tried to rotate the new second frame but this also results in a rotation of the first frame and visa versa.
View 4 Replies View RelatedI have created an image and would like to print as many copies of it as I can fit onto a single page from my printer (let's say A4 size). (My image is a logo that I am printing to water-slide transparency which is too expensive to waste one sheet per image). I can't seem to easily do this in Paint.Net (the options for contact sheet and wallet don't come out in quite the size I want). So I guess the best option is to save the file in another format (tiff, jpeg, PNG etc) and then copy it multiple times into another app like Word or PowerPoint, and then print from there. However my image has some transparent areas that I need to keep as transparent. How do I do this? Are there some image file formats that will retain the transparency? Likewise do word or PowerPoint support the transparent areas and print as such?
View 3 Replies View RelatedWhen I cut, and copy an image to the clipboard and then paste the image into a new, blank page, it pastes the image multiple times (about 20) on the one page. How can I revert to it pasting just one image?
View 1 Replies View RelatedI have a logic problem in my code that I need solving,
here's the bit of code which is supposed to set the text, image and link for a symbol used multiple times on the Stage.
var names = ["melz", "brom", "calm", "micj", "mick", "brir", "mato", "brym", "azin", "hugh", "nicl", "bonr", "lisa"];
var name = null;
for(var x = 0; x < names.length; x++){
name = names[x];
var initials = (name[0]+""+name[3]).toUpperCase();
var cursymbol = sym.getSymbol(name);
[Code]...
The text and image code work, however my problem is with setting the link. It always sets all the symbols to the last name in the names[] array. What I want it to do is to set the link to the personalised name in the array. So the HH button will link to hugh.html and the BM button will link to brym.html etc.
For now I'm going to play around a bit and see what happens.
I have created a webpage using Xara Designer Pro 6 and am trying to import my rotating GIF image. (I have created this image using Xara 3D). When I import this image everything else on the page dissapears. How can I import this correctly?
View 7 Replies View RelatedWhen I rotate a landscape image 90 degrees to portrait format the top and bottom of the image gets cut off. How do I prevent that and be able to view the whole image?
View 3 Replies View RelatedI have a star image that I would like to put on the ends of my banner for my blog. I would like the image to be a "spinning" or rotating gif.
View 1 Replies View RelatedWhen I need to rotate an image a few degrees a grid is displayed over the image, as a guide. However, the grid also rotates, making it a somewhat useless feature.
View 3 Replies View RelatedWhen I rotate this one and I got blur version in nd version below. How do I avoid blur ?
Check this out below:
I want this:
to this:
Is there a way to take an image, and make an animation of it rotating 360 degrees?
I've never looked into batch processing with GIMP, but I would be willing to. This is for a video game sprite.
I've noticed that in Paint Tool SAI (which I really wish I could buy but I have no money) has two things I wish GIMP could do.
1: SAI has an ability to rotate the view without rotating the image itself.(rotating a graphics tablet to comfortably get the pen stroke right.) Is there any way this could be implemented into a new update of GIMP?
2: SAI has really good pressure sensitivity and natural *smooth* pressure strokes. I've kinda noticed GIMP is geared more towards Mouse/Touch pad art creation; is there any way to get pressure sensitivity into the program?
I'm afraid to use GIMP anymore because the whole program takes about 20 minutes to load, from clicking the application icon on my desktop. Once it's up though, it functions well. Even after I close it out, and end up clicking the application icon again, it takes another 20 minutes to load up.
I placed a .psd image in Illustrator CS5 at 100% at 600ppi. My link information is telling me that it is at 600ppi. But when I do a 90degree rotation, my link information is now telling me that I have a picture resolution of 859ppi x 420ppi. Why is that? From what I know and learned, a resolution doesn't change except when we change the scaling of an image but not rotating it.
This made me wonder because when we receive files from customer with embed images, how can I know that this image wasn't rotated and that the link informations panel is giving me the right numbers?
I have a directory of 100 images in a directory that I am going to add to my online photo album. I want to run these images through some image optimization to reduce the size and enhance the colors. BUT, when I do this, the modified date of the image gets changed to the current date. My online photoalbum uses this modifed date as the pictures date. So after my pictures are all uploaded to my online photo gallery, the dates are not correct and pictures are not in any date order.
is there a way to tell photoshop to NOT update this date when modifying an image?
What are all of your processes for modifying images and tracking the actual image date?
I open any kind of file or when I create a new file it takes Photoshop at least 30 secs to open or create the file. I also have PS installed on another computer (with the same specs) where I don't have this problem.
why it takes PS so long to open/create files? I'm using a laptop with a Core 2 Duo processor and 2GB of DDR2 ram.
I have a small niglling issue with my copy of Photoshop CS3 on Vista Ultimate 64 bit and I never use to get.
For the past several months I have had to click the PS icon (usually in my quick launch) several times before photoshop will actually boot up. Sometimes I can get PS to boot up on the first click, sometimes 2 (usually) but other times I have to click it bout 6+ times before I see the PS splash screen and it starts?
However, PS is doing something on this non-booting clicks, cos my Task Manager shows I have several processes of PS running, but they all use significantly less memory than the actual opened PS. So for example, if I had to click 6 times, the one that is open may be using 71k, but all the other ones will be using 4k, I then manually stop those processes and PS works fine.
This isn't a major problem cos I can get PS to boot and function as it is suppose to, but it its somewhat annoying when I have to keep doing this process everytime I want to run PS.
My specs (incase its needed) are:
Windows Vista Ultimate Retail x64
Intel Q9550 @ 3.6GHz
4GB PC2-8500 Corsair Dominator Ram
1x 150GB WD Velociraptor 10,000RPM HDD
1x 1TB Samsung F1 HDD
ATi 4870x2 2GB Graphics Card
Also, incase it matters, I have a copy of Flash CS3 installed too, both PS and Flash are 100% legimate copies.
I have had a problem with opening some PSD template files. It doesn't happen all the time and it doesn't happen with every template. All of the templates were downloaded as zip files and opened and saved using Photoshop CS 5 on a Windows XP PC. When this happens I am getting an error message to the effect that the file can't be opened as it was done in a different version of PS. When the files were saved, they were saved as PSD files and the compatibility check box is always checked. The thing is, sometimes the file will open and sometimes the same one won't.
View 2 Replies View RelatedUsing PS CS6 on WIndows 7 64. All drivers updated. When I set 5 copies in the print menu, with either PSDs, TIFFs, or JPGs, PS sends the same job five times rather than telling the printer to just make 5 copies.
This happens when using either the color laser or Epson R3000. This does NOT happen when using non-CS6 products. On a 25 print run, this takes an abnormally long time.What I HAVE found is that PS is NOT passing the information to the printer. In other words, even though I set PS to multiple copies, when I click printer options the number of copies has not been passed to the driver.
way to make more than one copy of a layer at a time? You can right-click on a layer and duplicate it once, but often I'd like to make several copies on different layers.
View 2 Replies View Relatedwhy certain filters are grayed out sometimes. I am creating an image right now and I want to apply a pixelate filter to a layer and it's grayed out along with brush strokes, artistic and a few others, yet a little over half of the filters are available.
View 1 Replies View Related