downloaded the trial version of CS2. I scan a lot of images onto my computer. Naturally, the images stored in My Pictures are not entirely centered.
Is there any feature on Photoshop that would allow me to SLIGHTLY rotate an image
CS4 Bug - Rotating jpg gets center stretched and size expanded.
What happens is I have a jpeg in a separate layer. I then shrink it to overlay on another layer. I begin to shrink and rotate it, and then at some point (seemingly a certain angle) during rotation the image's bounding box gets stretched like 500% or some gross number. How do I stop this from happening?
I have two adjacent circles. I created two tangent lines between them on opposite sides. I want to connect the lines to the circles. So - I make the circle into a pie, and with the node editing tool, drag the nodes around until I see the little info text go from edge to "node" where it snaps on the nope of the line.
Before I start this, the lines are perfectly tangent. When complete, the lines are no longer tangent and the circle is shifted upwards, and is moved off the perfect tangent by different amount for each line. I can see a difference at 3200% and 11000% zoom at 0.5 point lines.
This occurs if I rotate the circle, or make the circle into an arc also.
It seems that when the circle is drawn, the center point about which its rotated, and from where the arcs/pies are drawn is not exactly center. This is happening when I manually rotate it. It I rotate it giving it a specific degree in the properties bar across the top, it rotates fine. For instance, repeating this again, the arcs of the circle is below one line, and above the other live by a lesser degree.
Is there a way to rotate an image (made of pixels) so it won't look like crap?
View 3 Replies View RelatedRecently I have started to get in to photography with my digital camera. I have noticed that if you rotate a jpeg 90 degrees or whatever that the file size goes down.
Is there anyway to stop this and if so, how?
I was given a disc with 75 pictures on it to deal with. The images are scans of old photos, and many of them are scans of a whole page from an album. There is handwriting on many of the photos/pages that I want to keep intact.
My big problem is this: Many of the photos/album pages were scanned in a way that makes it neccesery for me to rotate/flip them into proper position. When I rotate them, the handwriting comes out backward/mirrored.
I kind of recall running into this before on an unimportant somethingorother I was working on, but since it wasn't important I left it be.
ive got a problem ive been rotating my original image around in a circle to create a cool effect, yet i want to rotate it back around with the front but how do i do that and keep the same scale. i was measuring the top rotation of of a certain part on the car and bringing it to that each time to keep it the same but now i cant since its not symmetrical
in short terms I need "Gap a" to = "Gap b"
I'm using a template for a cd sleeve. One half of it is upside down so to work on the other half I have to rotate the image. I will have to rotate the image a hundred times before the project is finished.
Does this affect the quality? If so, any workarounds for me?
I can create a rotating image with sevaral images in Photoshop? Much like a gif? Would this improve my page load time or would it be the same as loading a slideshow? Here is an example of what we wanna do
View 1 Replies View RelatedI got a file from a client, which, when I attempt to rotate it 90 degrees, it distorts elongated. And no, it doesn't matter whether I use PS, Illustrator, or InDesign.
View 7 Replies View Relatedhow to make a rotating animation (rotate an image) with image ready. I have tried to rotate the new second frame but this also results in a rotation of the first frame and visa versa.
View 4 Replies View RelatedI have created a webpage using Xara Designer Pro 6 and am trying to import my rotating GIF image. (I have created this image using Xara 3D). When I import this image everything else on the page dissapears. How can I import this correctly?
View 7 Replies View RelatedWhen I rotate a landscape image 90 degrees to portrait format the top and bottom of the image gets cut off. How do I prevent that and be able to view the whole image?
View 3 Replies View RelatedI have a star image that I would like to put on the ends of my banner for my blog. I would like the image to be a "spinning" or rotating gif.
View 1 Replies View RelatedWhen I need to rotate an image a few degrees a grid is displayed over the image, as a guide. However, the grid also rotates, making it a somewhat useless feature.
View 3 Replies View RelatedWhen I rotate this one and I got blur version in nd version below. How do I avoid blur ?
Check this out below:
I want this:
to this:
Is there a way to take an image, and make an animation of it rotating 360 degrees?
I've never looked into batch processing with GIMP, but I would be willing to. This is for a video game sprite.
I've noticed that in Paint Tool SAI (which I really wish I could buy but I have no money) has two things I wish GIMP could do.
1: SAI has an ability to rotate the view without rotating the image itself.(rotating a graphics tablet to comfortably get the pen stroke right.) Is there any way this could be implemented into a new update of GIMP?
2: SAI has really good pressure sensitivity and natural *smooth* pressure strokes. I've kinda noticed GIMP is geared more towards Mouse/Touch pad art creation; is there any way to get pressure sensitivity into the program?
I'm afraid to use GIMP anymore because the whole program takes about 20 minutes to load, from clicking the application icon on my desktop. Once it's up though, it functions well. Even after I close it out, and end up clicking the application icon again, it takes another 20 minutes to load up.
I placed a .psd image in Illustrator CS5 at 100% at 600ppi. My link information is telling me that it is at 600ppi. But when I do a 90degree rotation, my link information is now telling me that I have a picture resolution of 859ppi x 420ppi. Why is that? From what I know and learned, a resolution doesn't change except when we change the scaling of an image but not rotating it.
This made me wonder because when we receive files from customer with embed images, how can I know that this image wasn't rotated and that the link informations panel is giving me the right numbers?
I only see options to center text within the text box.
I want to center my text over the image (the canvas).
I'm a photoshop noob but am learning fast. I'm having a bit of trouble doing something that I imagine to most of you is quite straight forward.
Basically, I have a square image (3000px x 3000px) and I want to cut out an exact circle from the centre of the picture. So I choose the Ellipitcal marquee tool and place my cursor approximately in centre of the picture, hold down SHIFT and ALT and drag to the desired circle size. Next I press V to bring up the alignment toolbar hoping that I could centre the selection to the exact middle of the picture but I can't. PS won't allow me to select any of the alignment buttons.
After this I want to take the CUT image and paste as a new image so that I have a just the circle and it's contents and no rectangular background. I'm sure PASTE will do this but I can't get this far.
I want to blend and tone the center image (mostly the wood panels) so it looks somewhat compatible with the images on the side. I did one botched job of working on the file for a few hours, and didn't save it in my earlier stages, to my regret. It's all one image.
View 2 Replies View RelatedI just got a new Lightscribe drive and I have been having a field day making custom labels for old data discs. Now I have decided I want to make some backups of some of my games so I can put the original discs/boxes into storage finally.
The problem with this is that Lightscribe discs have a larger "unprintable" radius at the center of the disc that other media. I found that when I scanned some of my discs and imported them directly into the LS Print program I was losing alot of information/text/pictures.
Essentially I need to take a point in the center of the circle and 'stretch' it outward in a circular pattern. (If you have seen Ace Venctura 2, think about when he had to escape from his mechanical rhino-spy vehicle through its bum I have also attached an image so you can see exactly what I mean. The read circle in the middle is approximately where the most inner edge of a LS disc can begin to print.
where to even begin as far as keywords go. I do realize that there will be a certain degree of 'smushage' (technical term) on my final product, but I would rather keep the original disc look than having to make my own custom disc for each game.
I am using photoshop elements. I would like to scan in a book cover, and make it appear on a white background and center the picture do the white background surrounds the image. Is this done by some layer? How do I do this? Its a shame I could not attached the image, which I would like my scanned cover book to be like.
View 5 Replies View RelatedI notice in the latest version of PSE, they have added a checkbox Center IMage to the PSE prnter driver. In previous version there was no option to drag an image to another part of the page.
But when I uncheck Center Image in PSE 11 I am still unable to drag the image to a differnet location on the page. Am I missing something? What function does this checkbox have if I am unable to drag a picture elsewhere on the page?
Is there any way to set a preference so that when I open an image from my Finder (Mac) it opens in the center of my Application Frame workspace rather than always docked to the top left corner?
CS5.1 Extended, updated, current Mac OSX updated
When I drag a 3600x3600 px image onto a 3600x3600 px canvas, my image gets placed on the canvas with it's center at 1803,1803 px. So it's off just a tiny bit. When I place an image smaller than 3600x3600 px, it gets placed on the canvas with its center at 1802,1802 px or 1802.5,1802.5 px It's not terribly difficult to center it after it's placed, but I'd rather not spend the 5 seconds or so every time I place an image if I don't have to.
CS5 12.0.4 64bit running on Windows 7 home 64bit
i have a few hundreds images i need to watermark. The watermark i can do fine. but i have varying image widths.
I want the watermark to be centralised on the image. I also want to batch the process so i'm trying to work out if it's possible to centralise in an action.
way to draw a line down the exact center of an image, and possibly make the line look cool. I'm trying to create a custom Magic the Gathering playmat thing for a program for testing decks out.
I tried the line tool, but it doesn't seem to allow you to fill it in with the paintbucket after, or do anything with it for that matter. I just want a cool looking divider.
Then I might create another split into 3 sections vertically for 6v6 battles, any way to measure this out automatically?
How can I get my image to center in the Print Preview window? (Epson R2000, 12 x 12, borderless). No matter where or how I change the settings, the Print Preview window shows my image has been cut off on the right hand and bottom edges. Hence, I cannot get a 12 x 12 borderless image to center on a 12 x 12 sheet of scrapbook paper.
View 7 Replies View RelatedI'm creating a sprite-sheet and therefore need to be able to focus on certain parts of the image, at a time.
This however, is proving surprisingly difficult as I can't figure out if there is any way to pan my view of the image so that any part of its edges is centralized on my screen. Is there any way to do this or are there any relevant plugins available?
