i have a few hundreds images i need to watermark. The watermark i can do fine. but i have varying image widths.
I want the watermark to be centralised on the image. I also want to batch the process so i'm trying to work out if it's possible to centralise in an action.
What I need to do correctly, I'm sure the picture will explain better. I know I could use multiple masks stacked on top of each other or some similar method, but I'm looking for something less convoluted and neater.
[IMG] [URL]
Is it possible to have varying column widths in Mtext? If so how?
View 8 Replies View RelatedI only see options to center text within the text box.
I want to center my text over the image (the canvas).
I'm in process of making a bulk of certificates to give to a group of people who participated in a contest. I have the design but I have to create over 200 different certificates (because they are personalized for every person). Each certificate should contain the name of the person to whom is adressed.
Obviously I could do it one by one but I'm looking for a quicker way to do it. I have the names database in txt format, sql format, xml format, whatever...
I need to centre text and centre an image layer.
View 2 Replies View RelatedWhen you centrally allign text horizontally and vertically in a text box, the text sits slightly high of the centre. Is there any way of setting an action or setting to deal with this rather than adjusting by eye every time?
View 4 Replies View RelatedI select the text tool then drag it to make a box. I type text into, but it always go to the top. Is there way to make all of the text inside that box automatically center vertically?
View 9 Replies View RelatedUsing: Land Desktop Companion 2009
Issue: Imbeded text in Linetype is automatically orienting the top of the text toward the center of the arc. I have tried to "reverse polyline" to fix this, but the text will not change. Is there a line property that I am missing that will allow the text to orient itself as readable from arc Point of begining to the end?
In the dragged state, I don't want to use 'As Composed' because the label is composed to be parallel to the line, but I want it to flip to horizontal to the view when dragged. This is working fine with 'Stacked Text'
What is not working is the text justification. I want it to remain centre justified, as it is composed. But there doesn't seem to be any option for this when you use the 'Stacked Text' option for the dragged state. I thought that setting the 'Leader Justification' to false might do it, but that just makes it always left justified. Am I missing something here? Is there no 'Top right/bottom right/middle center/top left.....' option for Stacked Text? And if not, why not?
I'm in 2011.
I do a lot of CD designs, and often I have my text centered on the front covers. When I put the text centered, however, PSP is added an extra space to the end of text, so when I center it on the canvas the text is actually off-center to the left. When I go into edit the text, there is no space on the right of the words to delete.
With the text selected this is how it looks: The right edge of the frame should be flush with the right edge of the last 'T'.
I can make an even gradient between two straight lines, with a fair amount of precision. as shown in the first two jpegs
How I can do this between two curvy lines so the gradient adjusts to the changing thicknesses? In the second two jpegs I'm fudging the effect with the brush tool. But this is not precise enough for what I'm trying to do.
I want to use this for traditional animation drawn frame by frame. So if I went in with the brush tool in each frame, the gradient would be stroking and freaking out when you watch the animation.
I'm using actions through CS4 and have a large volume of TIFFs of varying sizes and dpi that I need to resize to the same dpi and longest length. I've set up the one action to resize both landscape and portrait images in one go to a standard longest length setting through the fit image automate function but this doesn't change the dpi of the files which range from 300 - 2400 dpi.
View 1 Replies View RelatedThe Inset Spacing settings within the Area Type Options drop-down are just too cumbersome. Is there an easier way to center text within a text box like we can do in InDesign? Why they left this out of Illustrator CS6.
View 2 Replies View RelatedI originally put this with a post on saving for web but I think this is a bit different.
If I shoot a big painting, the resolution of detail - brushstrokes, canvas, imperfections adds to the overall feel of the image. If I shoot a tiny/small image with the same lens/camera and it fills the screen those details look like a relief map of the Himalayas! Can I get around that? I notice that sharpening can make a difference but what are the principles here?
i'm using PS CS and I want to fill a selection with a pattern but i'd like to simulate a light source.. so i'd like the pattern to fill with a varying density -- like stippling..or cross-hatching. i'm doing a 2-color (black and white only) t-shirt design so i can't have any gradations of colour. this may be a loaded question.. so i'm just hoping to get pointed in the right direction. if u need me to be more specific let me know.
Would illustrator be better suited for this task because i also have access to ai cs. even if not.. can someone recommend a good illustrator forum that is comparable to this mb? and maybe for Flash too.
I have googled this and searched forums but cannot find working solution.
I am using cs2.
Created a new file with transparent background (150x75 pixels)
Drew a rounded rectangle shape and added new fill color layer.
Selected text tool and entered text.
In trying to move text to center, I can justify for horizontal but it will not center vertically. Text seems to hop up or down just off center.
I would like to watermark a logo on a batch folder of photos, but the photos are different heights (but same width). If I use text in Photoshop it's not a problem, but if I use my logo the Action places it in different positions depending on the height of the photo.
What I am looking for is a way to have the logo placed in a relative position to the bottom right corner of the photo. Say, 25px from the bottom and 0px from the right. I am unsure of how to achieve this relative placement.
I have to copy two lines of text into hundreds of images, and one piece has to be centered, 3 pixels from the top, the other centered at the bottom? Is there a way to make an action that will place things in the center, regardless of image size?
View 1 Replies View RelatedIs it possible to create a line in Illustrator CS6 with various widths? So for example a single line that starts out thin, and is thick at the end?
View 2 Replies View Relateddownloaded the trial version of CS2. I scan a lot of images onto my computer. Naturally, the images stored in My Pictures are not entirely centered.
Is there any feature on Photoshop that would allow me to SLIGHTLY rotate an image
It has been a while since I've been here and I REALLY need emergency assistance because my mind has gone completely blank with AGE.
I'm trying to create an action which I will be using for batch processing.
I have an image on which I need to place 3 text layers
The first layer I need to center across the image about 100px from bottom
The second layer I need to center across the image about 300px from bottom
The third layer I need to place about 200px in from the right edge and about 600px from bottom
I just installed X6 and I noticed in the status bar the width of the object I click on only shows up with black outlines. If it is a colored outline, it shows the color but no width. If it is black it will show the outline as black but also the width.
View 14 Replies View Relatedhow to create a new sample line group and a new sample lines within that slg: URL....I have checked what is the default sample lines width (create sample lines command):
Autodesk.Civil.Settings.SettingsCmdCreateSampleLines SobreanchosSamples = default(Autodesk.Civil.Settings.SettingsCmdCreateSampleLines); SobreanchosSamples = civilDoc.Settings.GetSettings<Autodesk.Civil.Settings.SettingsCmdCreateSampleLines>(); Settings Cmd Create SampleLines SettingsCmdSwathWidths anchos = SobreanchosSamples.SwathWidths; double anchoIzquierda = Convert.ToDouble(anchos.LeftSwathWidth); double anchoDerecha = Convert.ToDouble(anchos.RightSwathWidth);
But how can I put these values (left width and right width) for a new sample line?Sample line class doesn't have "left width" or "right width" property ¿? Do I have to create a new vertex? However I think that I can´t add new vertex in vertex collection.
I'm working on a windfarm access road with tight bends that need to be 2.5m wider than the straights. I have created offset alignents and the corridor with no problem but how can I label the widths to show the variation in width at the various locations. The road is at the full width (7.5m) between tangent points and then tapers to the standard width of 5m
I have shown simple aligned dimensions on the screenshot but I'm sure there will be a way to do this automatically - won't there?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
If you can set the column widths to remember their positions in EATTEDIT? Take the below as an example, the prompts are truncated and the custom column sizes are never remembered when I adjust them.
View 3 Replies View RelatedI have a selection, make "Edit -> Stroke Selection" -> 4px and Anti-Aliasing is checked, but the stroked line is NOT Anti-Aliased. When I chose an even Line Width like 6 or 8 the Line is Anti-Aliased.
Why there is no Anti-Aliasing for odd Line Widths? Is this a Bug or do I miss something?
I'm a photoshop noob but am learning fast. I'm having a bit of trouble doing something that I imagine to most of you is quite straight forward.
Basically, I have a square image (3000px x 3000px) and I want to cut out an exact circle from the centre of the picture. So I choose the Ellipitcal marquee tool and place my cursor approximately in centre of the picture, hold down SHIFT and ALT and drag to the desired circle size. Next I press V to bring up the alignment toolbar hoping that I could centre the selection to the exact middle of the picture but I can't. PS won't allow me to select any of the alignment buttons.
After this I want to take the CUT image and paste as a new image so that I have a just the circle and it's contents and no rectangular background. I'm sure PASTE will do this but I can't get this far.
I want to blend and tone the center image (mostly the wood panels) so it looks somewhat compatible with the images on the side. I did one botched job of working on the file for a few hours, and didn't save it in my earlier stages, to my regret. It's all one image.
View 2 Replies View RelatedI just got a new Lightscribe drive and I have been having a field day making custom labels for old data discs. Now I have decided I want to make some backups of some of my games so I can put the original discs/boxes into storage finally.
The problem with this is that Lightscribe discs have a larger "unprintable" radius at the center of the disc that other media. I found that when I scanned some of my discs and imported them directly into the LS Print program I was losing alot of information/text/pictures.
Essentially I need to take a point in the center of the circle and 'stretch' it outward in a circular pattern. (If you have seen Ace Venctura 2, think about when he had to escape from his mechanical rhino-spy vehicle through its bum I have also attached an image so you can see exactly what I mean. The read circle in the middle is approximately where the most inner edge of a LS disc can begin to print.
where to even begin as far as keywords go. I do realize that there will be a certain degree of 'smushage' (technical term) on my final product, but I would rather keep the original disc look than having to make my own custom disc for each game.
I am using photoshop elements. I would like to scan in a book cover, and make it appear on a white background and center the picture do the white background surrounds the image. Is this done by some layer? How do I do this? Its a shame I could not attached the image, which I would like my scanned cover book to be like.
View 5 Replies View Related