AutoCAD Civil 3D :: Label Widths Of Roadway?
Jan 21, 2013
I'm working on a windfarm access road with tight bends that need to be 2.5m wider than the straights. I have created offset alignents and the corridor with no problem but how can I label the widths to show the variation in width at the various locations. The road is at the full width (7.5m) between tangent points and then tapers to the standard width of 5m
I have shown simple aligned dimensions on the screenshot but I'm sure there will be a way to do this automatically - won't there?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 9 Replies
ADVERTISEMENT
May 28, 2013
I use SAC 2014 to create a subassembly such as following but when design, the next Subassembly doesn’t attach with point P4, while the terms verify as designed is TRUE.
I checked and found that the Layout mode is different with- the Roadway mode.
View 2 Replies
View Related
Jun 26, 2013
I'm working on a project to widen a roadway through some mountains. The problem i am having is getting the corridor to apply to a future surface so that i can determine the volume difference. my profiles show there should be some cut and fill, but i cannot get the model to reflect this. when i try to preform a bounded volume i recieve a "the surfaces do not overlap".
View 3 Replies
View Related
Apr 12, 2012
attached is Roadway.dwg file
I made "Road" surface from Corridor Properties / Surfaces... but when I go to surface properties for "Road"...the statistics tab is blank.
2013 Civil 3D
View 2 Replies
View Related
Aug 23, 2013
Is there a way to design the road profile to use the low point at a certain Roadway station so you can put your storm inlets to line up with property lines. Because when you create a Sag the PVI is not where your low point falls on the profile. It would be nice to be able to drag the low point not the PVI to create the low point where you need it instead of a sort of back and forth dragging the PVI of the vertical curve.
View 9 Replies
View Related
Sep 24, 2013
I currently work for a construction company, we mostly focus on roadway rehabilitaion. We recieve DOT paper plans containing the construction plans and cross sections. I have been till now using the cross sections to build the roadway in Agtek, which is the software we use, then from there I can do my takeoff for excavation, utlites and areas. We have the 2012 BIM software and i'm very intersted in using that to rebuild the plans so I can preform the takeoff just as the DOT does as well as to model the utilities. Also i'm intersted in creating the model to show the estimators and the higher ups, so we can create a phasing plans, traffic plans or how we would want to handle the roadway rehab in general. I'm a novice in terms of Civil 3D, so this would be something i'd be practicing at home first.
View 9 Replies
View Related
Mar 26, 2013
I have trouble producing cross sectional diagrams and profile views for a roadway. So far i have a contour surface and a roadway centerline associated with it with alignments. I need to produce cross sectional diagrams showing elevations of the ETW on the level road as well as on super elevations.
View 5 Replies
View Related
Dec 22, 2013
how to create a new sample line group and a new sample lines within that slg: URL....I have checked what is the default sample lines width (create sample lines command):
Autodesk.Civil.Settings.SettingsCmdCreateSampleLines SobreanchosSamples = default(Autodesk.Civil.Settings.SettingsCmdCreateSampleLines); SobreanchosSamples = civilDoc.Settings.GetSettings<Autodesk.Civil.Settings.SettingsCmdCreateSampleLines>(); Settings Cmd Create SampleLines SettingsCmdSwathWidths anchos = SobreanchosSamples.SwathWidths; double anchoIzquierda = Convert.ToDouble(anchos.LeftSwathWidth); double anchoDerecha = Convert.ToDouble(anchos.RightSwathWidth);
But how can I put these values (left width and right width) for a new sample line?Sample line class doesn't have "left width" or "right width" property ¿? Do I have to create a new vertex? However I think that I can´t add new vertex in vertex collection.
View 8 Replies
View Related
Apr 3, 2013
I'm attempting to use the Superelevation tool on an interchange. I have 4, 1-lane ramps that I need to apply superelevation to. The three issues I have (so far) are:
In the Calculate Superelvation Wizard...
1. In Roadway Type, I don't know what to choose, I'm leading toward Undivided Crowned (center Baseline ) because my assembly (as of right now) is set up as an undivided crowned roadway (with the crown on the west travel lane edge). Which Roadway Type I should choose (for a 1-lane Ramp with different shoulder widths?)
2. Moving on to the the Lanes category doesn't matters. I uncheck symmetric Roadway, hoping I can choose "0" for the number of lanes on the Left, or at least put the lane width down to "0" but can't do either. I uncheck the Symmetric Roadway and it still makes everything symmetric (it acts as though it is still checked?) I only want to show a single 15' lane. (I even tried to use undivided planar, and put both lanes at 7.5'each, but then I still have shoulder issues...)
3. Move to the Shoulder Control. Why doesn't it give me the option to do different shoulder widths? On ramps it is very common (at least in Wisconsin) to have an 8ft shoulder on the right and a 4ft shoulder on the left. How can I type in 2 different shoulder widths.
View 2 Replies
View Related
May 8, 2012
The label associated to a grading point when is moved when is moved changes its size automatically and a leader appears. After this happen no control over the grading point and its associate label. refer to the image below.
View 1 Replies
View Related
Sep 6, 2012
C3D 2013. We have profile line labels, some of which get manually edited (for example, change the "<[Tangent grade(FP|P2|RN|AP|GC|UN|SD|OF)]>" to a static number such as 0.29%).
However, if you CTRL+Click and select one of these labels and change the style of that one label, then the manual edits are lost and the label reverts back to the default string.
Is there any way to turn this behavior off?
View 1 Replies
View Related
Jan 3, 2013
Is there a way to "Edit Label Text" in a Parcel area label? Similar to the way you can edit it in other styles.
View 9 Replies
View Related
Aug 8, 2013
I'm trying to label my Profile label stations as raw stations, 20~20 meters, and I'm not being able to adapt the format to STATION 0, STATION 2, without any plus zeros or +, or -, or commas, or anything, as following in the image.
Is there a easy way to do it?
View 2 Replies
View Related
May 17, 2013
Is it possible to pin a label to another label ? Or pin a label to an object so that when the first label (or object) is moved, the other moves with it ?
View 2 Replies
View Related
Nov 21, 2013
If you can set the column widths to remember their positions in EATTEDIT? Take the below as an example, the prompts are truncated and the custom column sizes are never remembered when I adjust them.
View 3 Replies
View Related
Feb 21, 2012
Is it possible to have varying column widths in Mtext? If so how?
View 8 Replies
View Related
Dec 24, 2011
I am having an issue trying to create a template using my correct line widths. Some of my plots are fine while others are too light. I know it is related to my plt file settings, but I can't seem to assess how to locate them in the plt file and then determine which is which (ie: the good ones vs. the incorrect ones)
View 1 Replies
View Related
Mar 25, 2013
I have been able to create a table, populate the Title and Headers with text. Which is all I want it to do for now. The problem is, I can calculate how wide I want each column, but it never gets drawn with the correct column width.
how to make it use the correct column width specified? Keep in mind all of the column widths may differ.
Attached is my code.
Public Sub AddTable(ByVal dwg_scale As Double, ByVal dwgTextHeight As Double) Dim doc As Document = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument Dim db As Database = doc.Database Dim ed As Editor = doc.Editor Using tableTrans
[Code].....
View 1 Replies
View Related
Dec 9, 2013
I have a drawing with polylines that have a global width of .2 which are plotting thinner than those with a width of 0. If I uncheck "plot object lineweights" it seems to plot correctly but the lines with 0 width plot so light (or grey) that you can't see the drawing well.
View 9 Replies
View Related
Apr 26, 2012
How to modify the column widths of an ACAD_TABLE?
I have known co-ordinates that I want each grip for the table to be set at. I can't just copy and paste the table from drawing to drawing. Each table of each drawing have different textual values, and the column widths will best be sized for each text value.
View 5 Replies
View Related
Mar 31, 2013
I have C3D 2012. I want to label a part of an arc. The arc has 3 lines that intersect it. I want to label the overall arc and the pieces of the arc. The overall arc is not a problem. How can I label the parts of the arc without breaking it up?
View 5 Replies
View Related
Feb 4, 2013
I keep getting the words "Label Text" being placed at 0,0 every time I insert a profile view into my drawing. Is there a simple way to change something in the settings to either not display this at all or sontrol how/where it is displayed? It is annoying when you do a zoom extents being you now get 2 small dots on screen, 1 being the actualy drawing at the correct utm cooridnates and the other being this piece of text down at 0,0.
View 9 Replies
View Related
Feb 15, 2013
I have applied a client's style to the alignment to show PI's. In this case we have 2 alignments close to each other (NB & SB of road). PI's close to each other will then overlap. What I would like to do is apply a style that will have the line and text go exactly in the opposite direction. I am trying to avoid dragging the text as that seems to bring up several more issues. I am looking for whatwhere to change within the style editor to make this happen.
C3D 2012 sp1
W7Pro 64bit
HP Z400 Workstation
16 GB RAM
Intel Xeon CPU W3565@3.20GHz
NVIDIA Quadro 4000
View 4 Replies
View Related
Nov 14, 2012
I need to add a ONE label to an alignment. I would like to do it via Vlisp or C#.
View 4 Replies
View Related
Apr 11, 2013
Need writing an expressions in a label style. I have part of it working, it is {Rim to Sump Height}-6 now I would like it to put 0 if it is 0 or less but I don't know how to do it. It works great on positive number but I want it to put 0 if it is a negative number.
View 8 Replies
View Related
Aug 17, 2012
Is there a way to label the low point of a profile or alignment that doesn't have any vertical curves? We have an existing alignment and profile which is relatively flat, and we'd like to establish and label the low points for drainage improvements.
View 9 Replies
View Related
May 29, 2012
how I can get an azimuth label on my line?
View 5 Replies
View Related
Jun 20, 2013
Any way to label the elevation of an object where it is picked? For example, I'd like to be able to pick on the node of a feature line or 3D polyline (or any object really) and have a label placed that displays the elevation of the object at the point where it was picked. This could appear similar to the surface spot elevation label, but instead of getting it's elevation from a surface, it would come from the object where picked.
Alternatively, any way to create a label style, perhaps using the Note label, to display something like this? I don't even care if it is dynamic or not, static would be fine. However, I do need it to scale innovatively . Tool Pac has a feature that does this, but the label is just a polyline and text that is not annotative.
View 4 Replies
View Related
Nov 3, 2009
we are in a situation where we want a dynamic wall label. how can i make that happen if technically the top of wall and bottom of wall are at two different x and y points. ideally i would like have one label and list it this way by referencing surface elevations:
RETAINING WALL
TOW=XXXX.XX
BOW=XXXX.XX
N=NORTHING
E=EASTING
View 9 Replies
View Related
Aug 3, 2013
How to set a value and label the “degree of curvature” for the horizontal alignment (HA)?
As the radius of the circular alignment (R) is calculated from the “degree of curvature” (attached) then I couldn’t figure out how to select a particular value for the “degree of curvature” (R=1718.8/Da) and then to label the horizontal alignment with it.
View 9 Replies
View Related
Jun 5, 2013
How to label all the contour at one go.
View 2 Replies
View Related
