The Inset Spacing settings within the Area Type Options drop-down are just too cumbersome. Is there an easier way to center text within a text box like we can do in InDesign? Why they left this out of Illustrator CS6.
View 2 Replies
When you centrally allign text horizontally and vertically in a text box, the text sits slightly high of the centre. Is there any way of setting an action or setting to deal with this rather than adjusting by eye every time?
View 4 Replies View RelatedI have to copy two lines of text into hundreds of images, and one piece has to be centered, 3 pixels from the top, the other centered at the bottom? Is there a way to make an action that will place things in the center, regardless of image size?
View 1 Replies View RelatedIt has been a while since I've been here and I REALLY need emergency assistance because my mind has gone completely blank with AGE.
I'm trying to create an action which I will be using for batch processing.
I have an image on which I need to place 3 text layers
The first layer I need to center across the image about 100px from bottom
The second layer I need to center across the image about 300px from bottom
The third layer I need to place about 200px in from the right edge and about 600px from bottom
Windows XP 32bit, English.
This does not occur when aligning objects, nor text with an object.This only occurs (as far as I can tell) when aligning two or more sets of text alone.
When I enter the align and distribute window the vertical align checkboxes are greyed out with "Top" selected.
It is not possible to uncheck or select any other vertical align option. It is possible to "force" the window to deselect it by selecting "top" in the distribute tab, but this does not make the align options selectable again.
You can workaround this by creating a temporary object to align with your text.
I'm creating a logo that consists of the word DIFFERENT in text and a shape, a dot (an ellipse) that I want to appear above the I and be vertically aligned with I.
How can I do this?The problem is that I can't see how to identify the point in the text - the centre of the I - to act as the target. I can't seem to get any of the Snap to Object tools to work.
I feel that I should be able to mark a specific point anywhere on a shape or an object and use those points to align.
I suspect that I could achieve the effect that I want by splitting the text characters up into individual objects, than I can align them more obviously but then I set up some other issues with kerning.
I have been putting together some inserts for a sales presentation folder in Illustrator CS6. I am having trouble trying to figure out possibly how to make my text align as presentable as possible. If you view the image you can see that my text on the right is not aligned with each other line consistently.
View 3 Replies View RelatedI don't know if this is possible at all in Illustrator, but I want to align objects to text paths. Look at the following example.
I start with something like a circular hierarchy, that I get as an output from another program. These are only lines and text. Now I want to add a flag behind the text. This flag should have the same orientation as the text path.
As this hierarchy is actually pretty big (this is only a snippet), I don't want to rotate all the flags manually. I tried to do it manually with the below example, but it still doesn't looks right...
Is this a proper method to rotate the flags according to the orientation of the text paths in Illustrator?
I'm new to Ai, and I'm working off of a 2 column end movie credit scroll with a space between them.
The formatting/alignment is fine and I simply need to replace the names in each column. However, the text is not behaving how I'd like it to. When I type text in the left column, I'd like the text to move to the left, but when I type it goes to the right (into the middle space), pushes the text in the other column to the right and messes up the formatting.
Is there a setting or way to make the text go to the left?
How i can align vertical center and horizontal center a single line text to a shape (in vbs) ?
View 1 Replies View RelatedI have two simple text objects (not textarea) and i'm trying to align them vertically to bottom.It aligns these text objects by bounding box, not by base line. How can i align text objects vertically by base line?
View 6 Replies View RelatedSo I have been adding in some text over a .jpeg image. Then I am making them into a .dwg file. I have running into a lot of issues with the text though. In the .ai file the text is all horizontal. When I export it however the text turns vertical. I am looking at the file in Autodesk Truview 2014. Just wondering if this is a bug or there is some way to avoid this. I am also using Adobe CS2.
View 1 Replies View RelatedLeft: 'vertical align bottomed text with the box of black stroke
Right: manually moved text with smart guide to align with its base line.(what I want to achieve)
As you can see in the left one, text has its base line under itself, and its bounding box doesn't match its base line. when I use align, it doesn't align using its base line but its bounding box.How can I make text align using their base line easily?
is there any possibility in GIMP to align a text not vertically at the bottom of a text box (there are options for left, right, center and fill but that's only the horizontal alignment). The motivation is, that I change a text in an image quite often and it whould "align itself" if it whould always be aligned at the bottom of the textbox.
View 3 Replies View RelatedMy office has two desktop printers, both HP. Our Officejet 7000 wide format prints great. On the HP Officejet 7500, we are often seeing text printing errors. It will not print the text from vertical dimension strings, and cuts off some M-text at an imaginary vertical line in the middle of the text box. PDF's of the same drawing look fine. Is this a printer driver issue? Is there anything I can do within AutoCAD?
View 3 Replies View RelatedWe have detail drawings that contain horizontal and vertical dimensions. They're drawn at full scale in model space and saved as individual drawings. We then insert them as blocks onto a sheet in paper space, scaling them down to 1/2", 1/4" scale ETC.
Here's the problem - all the vertical dimension text appears bolder than everything else when scaled down. Horizontal text is just fine, diagonal text also looks a little bolder though.
I cannot add multiple strokes to a font. The program only allows me to align the strokes to the center. While on shapes it allows me to align the stroke inside, outside, and center. .
View 5 Replies View RelatedI am creating a banner for a website. The banner is say 400 pixels wide by 60 pixels high. I drag the horizontal type tool so that it covers the entire rectangular shape exactly. I can center the text horizontally by selecting Window-->Paragraph and then selecting the center button. However I can't seem to center the text vertically in the banner using some Photoshop option. Once the text is typed then I can move it to what I think is vertically centered but it may not be exact.
The reason I am looking for exactness is I have to create several banners that are the same dimension but the text within will be different. Some of the banners will be one line and others will be two lines. I would prefer to vertically center them exactly.
When increasing the width of a stroke around a shape the stroke is not centered... WHY DOES IT DO THIS??? Even if I use the controls in the stroke window to change this it sill plays up.
View 2 Replies View RelatedIf I simply draw a line and want to align the stroke to one side (instead of the centre) how do I do this?
1) Giving a path offset effect.
I played with this, but didn't got me any result. I mean by giving the offset different values, I didn't saw the stroke moving to one side.
2) Creating a new brush for this.
3) Something by using an invisible rectangle.
At this moment, not one method have worked for me
What I basically want is to create those 'lineal' lines in the wing below. I already made an outline of the ribs and control of alignment of strokes gives me more options and flexibility to draw this.
how can I align a group of objects to the center of the artboard or elsewhere. Rt now it aligns each object in the group to the center, but I need the group as a whole to be centered.
View 3 Replies View RelatedWhen creating patterns with for example very easy dimensions like the artboard 400 x 400 px etc, and everything right placed, as you can see on the print screens, after having created the pattern, it never aligns center-aligned like I would like it too.
Left: the original positioning before creating the pattern. Right: the result of a perfect square, center aligned to the artboard and with the swatch applied, not too pretty he?
Using: Land Desktop Companion 2009
Issue: Imbeded text in Linetype is automatically orienting the top of the text toward the center of the arc. I have tried to "reverse polyline" to fix this, but the text will not change. Is there a line property that I am missing that will allow the text to orient itself as readable from arc Point of begining to the end?
In the dragged state, I don't want to use 'As Composed' because the label is composed to be parallel to the line, but I want it to flip to horizontal to the view when dragged. This is working fine with 'Stacked Text'
What is not working is the text justification. I want it to remain centre justified, as it is composed. But there doesn't seem to be any option for this when you use the 'Stacked Text' option for the dragged state. I thought that setting the 'Leader Justification' to false might do it, but that just makes it always left justified. Am I missing something here? Is there no 'Top right/bottom right/middle center/top left.....' option for Stacked Text? And if not, why not?
I'm in 2011.
I'm self taught on Illustrator, so I occasionally come across something that's probably really basic, but I am totally stumped. I think this is one of those things. All of a sudden, some of my Illustrator files have a dashed line running vertically down the center of the page. I can manually delete the dashes, but what is this and surely, there's a better way to get rid of it?
View 6 Replies View RelatedI created a Yin/Yang symbol, but for some reason it has a vertical line through its center. The line disapears sometimes after I move the symbol.It disapears in outline mode. Why is it thre? How do I get rid of it?
View 5 Replies View RelatedI do a lot of CD designs, and often I have my text centered on the front covers. When I put the text centered, however, PSP is added an extra space to the end of text, so when I center it on the canvas the text is actually off-center to the left. When I go into edit the text, there is no space on the right of the words to delete.
With the text selected this is how it looks: The right edge of the frame should be flush with the right edge of the last 'T'.
I make a compound object, then when I resize it, it moves anchors around. Note the corners on the 3rd "8" -- they're pinched together. This is happening on a lot of different object
Edit: There are no "snaps" enabled.
I select the text tool then drag it to make a box. I type text into, but it always go to the top. Is there way to make all of the text inside that box automatically center vertically?
View 9 Replies View RelatedI would like to add a Leader Text to lable a part- referencing the Part Number or whatever, move the text close to the edge of the part, to remove the leader/arrow and make the txt rotate 90deg to be vertical. I have messed with style settings for a new Vertical Txt style, and Vert Dim style -(pointed to the Vert Txt style and adjusted Notes and Leaders tab)
i don't understand why in the Format Text window the "rotation" box is always grayed out. can you unlock it?
how do you align text in new picture. I click on the move icon on the left and then go to the top to click on the align buttons after i select the layer but i'm not able to click on any of the align buttons. maybe the layer is locked or something. I just want to create buttons and have all the text in the center of each button. it is so simple iwth jasc, but why not adobe?
View 4 Replies View Related
