Illustrator :: How To Align Stroke To One Side (instead Of Center)
Jan 27, 2014
If I simply draw a line and want to align the stroke to one side (instead of the centre) how do I do this?
1) Giving a path offset effect.
I played with this, but didn't got me any result. I mean by giving the offset different values, I didn't saw the stroke moving to one side.
2) Creating a new brush for this.
3) Something by using an invisible rectangle.
At this moment, not one method have worked for me
What I basically want is to create those 'lineal' lines in the wing below. I already made an outline of the ribs and control of alignment of strokes gives me more options and flexibility to draw this.
When increasing the width of a stroke around a shape the stroke is not centered... WHY DOES IT DO THIS??? Even if I use the controls in the stroke window to change this it sill plays up.
I have a bent path, standard 90 degree corner. Illustrator CC is not allowing me to align the stroke to the inside of the path/corner. The inside and outside options are grayed out when this path is selected.
Of course, I can create a shape and then all three options for path alignment are usable. But if I cut a gap into the path of that shape it instantly reverts to a center aligned stroke. I can create what I need manually. But this is a time addition.
I cannot add multiple strokes to a font. The program only allows me to align the strokes to the center. While on shapes it allows me to align the stroke inside, outside, and center. .
usually if i want to align shapes side-by-side so that they have no gap between them, or 0px, i do it by cloning the shape and moving it along the direction its going and then zooming in on the gap. this is a 'by-eye', i'm sure theres a more definitive way to do it.
for example, if i am joining two square shapes together, to make a rectangle, how can i make sure the join is seamless and perfect?
I'm trying to add a stroke that's aligned to the outside of my path. It appears to be offsetting the stroke *and* moving anchor points at the same time. It does the same kind of thing when I align the stroke to the inside. It is fine when i align the stroke to center. The one that is offset to the top-left is the align-inside one.
I have a problem with my brush and pencil tool. Whenever I want to draw an object without a stroke and just a fill, it immediately assigns me a stroke in either the colour my fill is, or, if I'm using a gradient, in black. It doesn't have that problem with the pen tool though. I also checked in my presettings and my Transform plaette that the "Align to Pixel Grid" option is unchecked. Also, the "New Art has basic appearance" is unchecked.
how can I align a group of objects to the center of the artboard or elsewhere. Rt now it aligns each object in the group to the center, but I need the group as a whole to be centered.
When creating patterns with for example very easy dimensions like the artboard 400 x 400 px etc, and everything right placed, as you can see on the print screens, after having created the pattern, it never aligns center-aligned like I would like it too.
Left: the original positioning before creating the pattern. Right: the result of a perfect square, center aligned to the artboard and with the swatch applied, not too pretty he?
I make a compound object, then when I resize it, it moves anchors around. Note the corners on the 3rd "8" -- they're pinched together. This is happening on a lot of different object
My stroke when drawing shapes is center aligned. When measuring the shape it measures from the outer edges of the shape's stroke and not from the center as usual. I dont know how to change the settings back to measure from the center of the stroke of the shape. As I said, the stroke is adjusted to the center align option...? (using Illustrator CS5)
The Inset Spacing settings within the Area Type Options drop-down are just too cumbersome. Is there an easier way to center text within a text box like we can do in InDesign? Why they left this out of Illustrator CS6.
When you centrally allign text horizontally and vertically in a text box, the text sits slightly high of the centre. Is there any way of setting an action or setting to deal with this rather than adjusting by eye every time?
Occasionally paragraph allignment works opposite for left & right align, usually on Illustrator documents with Russian type.
In additon on center align text I set my cursor to input a period at the end of a sentence, and the period instead gets added to the beginning.
In character palette language is set to English USA, this is point text.
I created a new point text and this is happening, if I paste text from another document alignment works fine, font is Arial black but happens with all fonts.
I have to copy two lines of text into hundreds of images, and one piece has to be centered, 3 pixels from the top, the other centered at the bottom? Is there a way to make an action that will place things in the center, regardless of image size?
It has been a while since I've been here and I REALLY need emergency assistance because my mind has gone completely blank with AGE.
I'm trying to create an action which I will be using for batch processing.
I have an image on which I need to place 3 text layers The first layer I need to center across the image about 100px from bottom The second layer I need to center across the image about 300px from bottom The third layer I need to place about 200px in from the right edge and about 600px from bottom
When I resize an object (for example, I want to extend a horizontal line by 20%, using the % boxes in the property bar), the resizing action is executed from the center of the object itself (so, 10% to the left and 10% to the right in my example).
If that object is snapped to other objects, resizing from the center automatically unsnaps them and so snapping must be done again.
Is there a quick way (such as double clicking a node, or so) to resize an object not from its center, but from a side or a vertex of it?
i have 2 layer / ive set a particular distance between them . if i don't want to fuse in a single layer but i want to center them to the background keeping the distance and position tham what i have to do?i don't want to fuse them in a single layer.
What I mean is that say you have layers I and I that are positioned next to each other so they look like "II". You want to center them in relation to some selected space so that they still look like "II" and not "I".
Do you see what I'm saying?
Is there a way to center them so that they're still in the same configuration relative to each other instead of centering them so that they both get layered on top of each other in the centering? Maybe by linking them or some other way?
I need to center-align a rectangle to a group/block object (also it's midle), how do I do that? Can I create/insert a grip or snap point in the midle of the group/block object?
I am trying to do so my animation stage is align center. The problem is that the width of my animation is 1900px and I want to align center and overflow-x:hidden.
The objective is to section a part, selecting a center of the hole (side view, not top view) to attach the section line.
In the hole's top view we can select the center hole to attach the section view, but in the side view, i can´t find any attach point, even if i have a center line.
I know we can edit the section line later and create some construction lines to center the section line with the hole, but i wonder, there's a better process, more automatic, to achieve this?
Is there a way or an option I am missing to convert my regular paths to a path stroked with a brush profile,while maintining the proper stroke width?
For instance, I have a regular line with a stroke of 5 and then add a brush profile, which then converts the original stroke to whatever the brush was made at.
I have a shape with a black stroke and green fill. I have a white line segment over it. How do I get it so that the end of the line segment doesn't show over the black stroke of the object? If I try to put the line segment behind the object, then the object fill hides it completely.
I'm new to illustrator and I've tried to search for an answer but I don't know the best way to accomplish what I want to do. Seems like some combination of transparency or knockout groups and I've read a bit about this and can't figure out what I need to do.
I need an outline on a stroke that i drew but when i apply object>path>outline stroke i keep getting my initial stroke applied as well. I only need the outline, not the initial stroke. I use Illustrator CC.
I'm sure this is mind-numbingly obvious and I am overlooking it, but when I go to use the rotate tool, the center point of the rotation is defaulting to the center of the artboard, not the selected group of objects. How do I change that to default to rotating on the selection center by default?
PS. This is Illustrator CC (17.0.2) on a Mac running 10.9, if that is relevant.
I'm creating a logo that consists of the word DIFFERENT in text and a shape, a dot (an ellipse) that I want to appear above the I and be vertically aligned with I.
How can I do this?The problem is that I can't see how to identify the point in the text - the centre of the I - to act as the target. I can't seem to get any of the Snap to Object tools to work.
I feel that I should be able to mark a specific point anywhere on a shape or an object and use those points to align.
I suspect that I could achieve the effect that I want by splitting the text characters up into individual objects, than I can align them more obviously but then I set up some other issues with kerning.
