I cannot add multiple strokes to a font. The program only allows me to align the strokes to the center. While on shapes it allows me to align the stroke inside, outside, and center. .
View 5 RepliesWhen increasing the width of a stroke around a shape the stroke is not centered... WHY DOES IT DO THIS??? Even if I use the controls in the stroke window to change this it sill plays up.
View 2 Replies View RelatedIf I simply draw a line and want to align the stroke to one side (instead of the centre) how do I do this?
1) Giving a path offset effect.
I played with this, but didn't got me any result. I mean by giving the offset different values, I didn't saw the stroke moving to one side.
2) Creating a new brush for this.
3) Something by using an invisible rectangle.
At this moment, not one method have worked for me
What I basically want is to create those 'lineal' lines in the wing below. I already made an outline of the ribs and control of alignment of strokes gives me more options and flexibility to draw this.
how can I align a group of objects to the center of the artboard or elsewhere. Rt now it aligns each object in the group to the center, but I need the group as a whole to be centered.
View 3 Replies View RelatedWhen creating patterns with for example very easy dimensions like the artboard 400 x 400 px etc, and everything right placed, as you can see on the print screens, after having created the pattern, it never aligns center-aligned like I would like it too.
Left: the original positioning before creating the pattern. Right: the result of a perfect square, center aligned to the artboard and with the swatch applied, not too pretty he?
I make a compound object, then when I resize it, it moves anchors around. Note the corners on the 3rd "8" -- they're pinched together. This is happening on a lot of different object
Edit: There are no "snaps" enabled.
The Inset Spacing settings within the Area Type Options drop-down are just too cumbersome. Is there an easier way to center text within a text box like we can do in InDesign? Why they left this out of Illustrator CS6.
View 2 Replies View RelatedWhen you centrally allign text horizontally and vertically in a text box, the text sits slightly high of the centre. Is there any way of setting an action or setting to deal with this rather than adjusting by eye every time?
View 4 Replies View RelatedOccasionally paragraph allignment works opposite for left & right align, usually on Illustrator documents with Russian type.
In additon on center align text I set my cursor to input a period at the end of a sentence, and the period instead gets added to the beginning.
In character palette language is set to English USA, this is point text.
I created a new point text and this is happening, if I paste text from another document alignment works fine, font is Arial black but happens with all fonts.
I have to copy two lines of text into hundreds of images, and one piece has to be centered, 3 pixels from the top, the other centered at the bottom? Is there a way to make an action that will place things in the center, regardless of image size?
View 1 Replies View RelatedIt has been a while since I've been here and I REALLY need emergency assistance because my mind has gone completely blank with AGE.
I'm trying to create an action which I will be using for batch processing.
I have an image on which I need to place 3 text layers
The first layer I need to center across the image about 100px from bottom
The second layer I need to center across the image about 300px from bottom
The third layer I need to place about 200px in from the right edge and about 600px from bottom
i have 2 layer / ive set a particular distance between them . if i don't want to fuse in a single layer but i want to center them to the background keeping the distance and position tham what i have to do?i don't want to fuse them in a single layer.
View 2 Replies View RelatedWhat I mean is that say you have layers I and I that are positioned next to each other so they look like "II". You want to center them in relation to some selected space so that they still look like "II" and not "I".
Do you see what I'm saying?
Is there a way to center them so that they're still in the same configuration relative to each other instead of centering them so that they both get layered on top of each other in the centering? Maybe by linking them or some other way?
I need to center-align a rectangle to a group/block object (also it's midle), how do I do that? Can I create/insert a grip or snap point in the midle of the group/block object?
View 7 Replies View RelatedI am trying to do so my animation stage is align center. The problem is that the width of my animation is 1900px and I want to align center and overflow-x:hidden.
View 8 Replies View RelatedI'm sure this is mind-numbingly obvious and I am overlooking it, but when I go to use the rotate tool, the center point of the rotation is defaulting to the center of the artboard, not the selected group of objects. How do I change that to default to rotating on the selection center by default?
PS. This is Illustrator CC (17.0.2) on a Mac running 10.9, if that is relevant.
I'm creating a logo that consists of the word DIFFERENT in text and a shape, a dot (an ellipse) that I want to appear above the I and be vertically aligned with I.
How can I do this?The problem is that I can't see how to identify the point in the text - the centre of the I - to act as the target. I can't seem to get any of the Snap to Object tools to work.
I feel that I should be able to mark a specific point anywhere on a shape or an object and use those points to align.
I suspect that I could achieve the effect that I want by splitting the text characters up into individual objects, than I can align them more obviously but then I set up some other issues with kerning.
I scanned an image that I want to trace, but it won't let me use different strokes with the pen tool? I don't have any layers locked and the strokes are all loaded, it just won't let me use them on that image.
View 1 Replies View RelatedFor the life of me I just can't duplicate this look where their is three strokes happening to this text. Is there an easy way to do this in Illustrator? It's not something that I like, but it's the client.
View 2 Replies View RelatedI have a ready drawing but I just noticed that it is a bit to small: is there a way to scale everything (objects, grid, artboard) except the thickness of the strocks and arrowhead if any?
I can do all this separately (objects, then grid, then artboard) but it would be nicer to scale everything at once.
I have no problem dividing objects using the "divide" tool in the Pathfinder palette, but I was wondering if there was a way to divide brush strokes?
For example, let's say you wanted to paint three brush strokes right next to each other, but not overlapping. Is there a way to select all three strokes and then divide them so no one stroke resides over another, they would be completely separate of each other.
I have a problem that consistently occurs in Illustrator CS4 on Leopard that only presents itself when I try to outline paths in dxf files opened in Illustrator that I think have been supplied from and Autocad type software.
I get the unknown Error: OSEG and only some paths outline.
The only way I have found to fix it is to outline paths individually till I find the culprit path or paths and and either find the point in the path that is causing the error and remove it (which can be time consuming), or just delete the path all together and re-create a replacement. It seems to me there is a problem with Illustrator being able to handle certain path information it encounters that is causing the error.
I have been doing the same thing in all versions of Illustrator since the very first version that supported opening dxf files (so quite a few generations of Illustrator, pre CS I think) and this is the first time Illustrator has presented the problem with these types of files specifically.
I drew some strokes and then I was busy on another part of my image then when I looked back at the other part half of my strokes were not visible. Im not sure why. They are still there because I can select them and I can see them in outline mode but they are invisible in preview for some unknown reason. The stroke hasnt changed and the layers are all visible. I restarted and they came back.
View 2 Replies View Relatedhow do you create outlines from strokes in cs5
View 7 Replies View RelatedIs there a way to draw a single line so that it appears to overlap like in the example below (right), instead of appearing to merge like it is doing as circled in red (left)?
View 2 Replies View RelatedI am using a charcaol brush on a stroke in CS6 and when I pick a gradient it just turns the color completely black. The gradient works if I make the stroke basic though. I am guessing it is not possible for whatever reason? I also tried to recolor the artwork but couldnt find any gradient options in there.
I suppose a workaround would to maybe make a duplicate of the stroke, make it a basic shape and blend the 2 or something?
Are you an AI CC user? If so, can you take a look at the following thread and report if that bug is fixed in AI CC? URL...
View 16 Replies View Relatedgot an out of the blue commission for a t-shirt .... now I'm getting a crash course in Illusrator. Been using it all of one day.
Here's the trouble though - when I use my brushes to make actual brush strokes, the resulting paths look "grainy" - like they aren't vectors/paths.
From what I understand, even drawing freehand with the brush should produce vectored lines - and I can play with points within those freehand brush strokes. But when I zoom out, the strokes I drew with the brush look almost "pixelly", while the ones done with the pen tool look nice and smooth (I should note this is a custom brush that I made, butt the other paths that I've applied the brush to look fine).
Is this normal? Should I resign myself to having to go back over everything using the pen tool (there's a lot of fine, irregular line work)? Or is there some setting of the brush or special key that I'm missing?I know it's small, but you might be able to see what I mean where the main vertical line meets up with the angled line. The near-vertical is brushed in, the angled one is a path with brush overlay....
I use artioscad wich has a plug-in for illustrator. When I'm working with illustrator i can't change the weight of my strokes, color or fill, in fact i can't do anything, everything is locked. I have tried to unlock the draw but with n o sucessm I have to make the illustrations for the boxes I draw and using *.eps file is not my solution.
View 7 Replies View RelatedI asked a question a couple days ago regarding the effects of old style print. Although, I know a lot of it is done manually, I was wondering if it could also be done digitally in either Illustrator or Photoshop.
In Illustrator I created 10 brush strokes from a jagged pattern found in a vintage element to represent the scratch board or printing effect. In Photoshop you can kind of create the effect from switching to a Bitmap mode.
However, Photoshop is a pain to bend the halftone lines to fit the curves and they are all evenly spaced. Illustrator works better for laying ou the lines based on the tonal value, but using a brush for the strokes becomes a little distorted.
How to achieve the jagged edge effect show in this very simple image? The edges and lines are not all the same so I don't want to use the ripple tool in PS and the wrinkle Tool makes them too ragged.
I find it hard to believe this style is only accomplished through scratch board or printing techniques. Even traditional pen and ink doesn't really work like this. I find way too many images, free ones too, like the one below to have it be only done with scratch board.
I'm trying to follow a tutorial from vector.tutsplus.com: [URL] the problem I'm having is after step 19. The strokes you add won't stay inside the picture/artboard. I have tried to export the image to jpg. but it doesn't go away.
View 6 Replies View Related