I have a ready drawing but I just noticed that it is a bit to small: is there a way to scale everything (objects, grid, artboard) except the thickness of the strocks and arrowhead if any?
I can do all this separately (objects, then grid, then artboard) but it would be nicer to scale everything at once.
I scanned an image that I want to trace, but it won't let me use different strokes with the pen tool? I don't have any layers locked and the strokes are all loaded, it just won't let me use them on that image.
View 1 Replies View RelatedFor the life of me I just can't duplicate this look where their is three strokes happening to this text. Is there an easy way to do this in Illustrator? It's not something that I like, but it's the client.
View 2 Replies View RelatedI have no problem dividing objects using the "divide" tool in the Pathfinder palette, but I was wondering if there was a way to divide brush strokes?
For example, let's say you wanted to paint three brush strokes right next to each other, but not overlapping. Is there a way to select all three strokes and then divide them so no one stroke resides over another, they would be completely separate of each other.
I have a problem that consistently occurs in Illustrator CS4 on Leopard that only presents itself when I try to outline paths in dxf files opened in Illustrator that I think have been supplied from and Autocad type software.
I get the unknown Error: OSEG and only some paths outline.
The only way I have found to fix it is to outline paths individually till I find the culprit path or paths and and either find the point in the path that is causing the error and remove it (which can be time consuming), or just delete the path all together and re-create a replacement. It seems to me there is a problem with Illustrator being able to handle certain path information it encounters that is causing the error.
I have been doing the same thing in all versions of Illustrator since the very first version that supported opening dxf files (so quite a few generations of Illustrator, pre CS I think) and this is the first time Illustrator has presented the problem with these types of files specifically.
I drew some strokes and then I was busy on another part of my image then when I looked back at the other part half of my strokes were not visible. Im not sure why. They are still there because I can select them and I can see them in outline mode but they are invisible in preview for some unknown reason. The stroke hasnt changed and the layers are all visible. I restarted and they came back.
View 2 Replies View Relatedhow do you create outlines from strokes in cs5
View 7 Replies View RelatedIs there a way to draw a single line so that it appears to overlap like in the example below (right), instead of appearing to merge like it is doing as circled in red (left)?
View 2 Replies View RelatedI am using a charcaol brush on a stroke in CS6 and when I pick a gradient it just turns the color completely black. The gradient works if I make the stroke basic though. I am guessing it is not possible for whatever reason? I also tried to recolor the artwork but couldnt find any gradient options in there.
I suppose a workaround would to maybe make a duplicate of the stroke, make it a basic shape and blend the 2 or something?
Are you an AI CC user? If so, can you take a look at the following thread and report if that bug is fixed in AI CC? URL...
View 16 Replies View Relatedgot an out of the blue commission for a t-shirt .... now I'm getting a crash course in Illusrator. Been using it all of one day.
Here's the trouble though - when I use my brushes to make actual brush strokes, the resulting paths look "grainy" - like they aren't vectors/paths.
From what I understand, even drawing freehand with the brush should produce vectored lines - and I can play with points within those freehand brush strokes. But when I zoom out, the strokes I drew with the brush look almost "pixelly", while the ones done with the pen tool look nice and smooth (I should note this is a custom brush that I made, butt the other paths that I've applied the brush to look fine).
Is this normal? Should I resign myself to having to go back over everything using the pen tool (there's a lot of fine, irregular line work)? Or is there some setting of the brush or special key that I'm missing?I know it's small, but you might be able to see what I mean where the main vertical line meets up with the angled line. The near-vertical is brushed in, the angled one is a path with brush overlay....
I use artioscad wich has a plug-in for illustrator. When I'm working with illustrator i can't change the weight of my strokes, color or fill, in fact i can't do anything, everything is locked. I have tried to unlock the draw but with n o sucessm I have to make the illustrations for the boxes I draw and using *.eps file is not my solution.
View 7 Replies View RelatedI cannot add multiple strokes to a font. The program only allows me to align the strokes to the center. While on shapes it allows me to align the stroke inside, outside, and center. .
View 5 Replies View RelatedI asked a question a couple days ago regarding the effects of old style print. Although, I know a lot of it is done manually, I was wondering if it could also be done digitally in either Illustrator or Photoshop.
In Illustrator I created 10 brush strokes from a jagged pattern found in a vintage element to represent the scratch board or printing effect. In Photoshop you can kind of create the effect from switching to a Bitmap mode.
However, Photoshop is a pain to bend the halftone lines to fit the curves and they are all evenly spaced. Illustrator works better for laying ou the lines based on the tonal value, but using a brush for the strokes becomes a little distorted.
How to achieve the jagged edge effect show in this very simple image? The edges and lines are not all the same so I don't want to use the ripple tool in PS and the wrinkle Tool makes them too ragged.
I find it hard to believe this style is only accomplished through scratch board or printing techniques. Even traditional pen and ink doesn't really work like this. I find way too many images, free ones too, like the one below to have it be only done with scratch board.
I'm trying to follow a tutorial from vector.tutsplus.com: [URL] the problem I'm having is after step 19. The strokes you add won't stay inside the picture/artboard. I have tried to export the image to jpg. but it doesn't go away.
View 6 Replies View RelatedI have a layer with 3 objects. (this is not a font).The S, E and the XY are unique objects, and i wanted to apply two strokes to it. First a black stroke and then a blue one.
My issue here is that the strokes at the red marked points are overlapping to other objects.
Is there a possibility that the strokes don't overlap into the other objects? can i somehow "merge" the 3 objects to one so the overlapping doesn't occur?
I have a AI file and it is a map. On this map I have Interstate and Highway road sign icons that were created in AI. When I place a new AI file icon, resize it, and then embed the AI file a stroke outline appears around the road icon and thus making the icons very ugly. If I place it and leave the icon alone and then embed it the file is fine. its only after I re-size it.
I am using AI CC 17.1 . When I embed the image I can’t find the option to un-embed the file. I used to be able to do that with Ai 6. is this a bug in CC?
I use Illustrator CS5 and can not blend variable width strokes in Illustrator. I can not do that even with the same width profiles unless they are expanded. I could not find any questions similar on the net regarding this, but wanted to double check before I just made the necessary changes. I'm a bit confused because Adobe 'help' shows how powerful the blends of objects are, but we can't do them as strokes?
I want to keep the blend as strokes not expand them. What is the best way to view how the blend will look with variable widths without expanding and then 'undoing' a bunch of times.
but is there a hot key for expanding the blend without going into object-blend-expand?
There is one elementary thing about Illustrator CS6 that I don’t understand. Do the following:
-Select Pencil Tool. Make three strokes at random and select them.
-Apply a brush to them, for instance a Calligraphic Brush 5 pt. Oval.
-Deselect the strokes.
-Doubleclick the same brush on the Brushes Panel in order to edit it.
-Choose Preview to see changes.
-Change the brush size to 20 point. The three strokes will change in size, as they are supposed to.
-Click OK. A warning dialog box appears. Click Apply To Strokes.
Now what happens? THE CHANGES DO NOT APPLY TO THE STROKES. They turn back from 20 to 5 pt. Why? Try, on the other hand, to make the entire procedure without selecting Preview. Now the process runs perfectly; the change to 20 pt. is applied to the strokes. My question is: why does Preview spoil the process?
I am using stokes to mask out a shape I want. I want to remove these strokes altogether but retain the masked shape.
So for example the below image has three circles with a white stroke to form the shapes I desire.
I am perfectly happy with this when it is on a white background but I want the strokes to be transparent rather than white so that they cannot be seen on a non-white background (see below).
Obviously if I just make the strokes transparent I lose the desired shape.
This is what I am trying to achieve (this was done in Photoshop but I want to achieve the same in Illustrator).
I make a graphic style with more than one stroke. I choose the brush tool. I click the graphic style. I draw a line. only one of the strokes is applied to the path. I have to select the path again, and then click the graphic style for it to apply."New art has basic appearance" is unchecked.It's time consuming and frustrating. And it takes the punch out of one of the better additions to the program.
View 7 Replies View RelatedIs there an easy way in Illustrator to add strokes inside letters to get an effect something like this? I know you can just draw the lines, but it never looks quite right.
View 6 Replies View RelatedI am designing a brochure and have added a rectangle with a different colour stroke but I only want the stroke to be on the top and the bottom of the rectangle. How do I remove the sides? I have tried just selecting the side stroke with the direct selection tool and then hit delete but it deletes the whole rectangle, stroke and fill.
View 3 Replies View RelatedI've encountered a problem which is a first for me with Ai CS4, and that is I'm working on a cat illustration but I'm drawing hairs using a brush I've made that have anywhere from 4-5 strokes with multiple colors to mimic the look of hair. Everything was working fine until I used the hand tool to move the artboard around and the image pixelated a bit. Zooming in/out takes a bit of time as well, and then drawing any further strokes from a fresh boot now that I've saved my progress seem to be cached, then appear slowly one at a time afterwards.
I've got a Macbook Pro with 2.4ghz i5 cpu, 4gb ram, running osx 10.7.5. I'm wondering if I'm pushing the limits of the intel integrated graphics card. I have a Mac Pro at home with 8gb of ram although I learned recently that Ai CS4 only utilises 2gb of ram max. Regardless, my tower at home has a dedicated graphics card, ATI I believe.
System monitor reads 346mb free, 920mb wired, 2.03 active, 750mb inactive, used 3.66gb.
Trying to narrow it down to being operator error IE: too complex for Illustrator, or possibly the laptop hardware. I'd love to get back to work on this project of mine
Consequently the artboard size is 11.49in x 14.92in
I've built two different colored strokes around some text (inner layer is green, outer layer is red). When I convert this to the Live Paint Mode by clicking the letters with my Live Paint bucket, a warning comes up telling me certain things might be lost. I press okay, and the red outer layer of the text dissapears. I want that layer to stay though! I've attached pictures of this process.
View 2 Replies View RelatedI have two overlapping circles with 2px solid stroke. Now, I'd like to change the two parts of the circles which are now within the circles to a dashed line. But this creates only parts of the lines in dashed mode. Here, I used the Pathfinder's "Divide".
View 2 Replies View RelatedI am going to trace some shape and need it have in dashed strokes and differently colored. When I want to use color options for strokes it doesnt work. How to color it?
View 3 Replies View Relatedhow to apply multiple strokes to a path with JavaScript? Assigning strokes width, caps, position in stack (my particular concern)? All i can do at the moment is to apply a single stroke.
View 5 Replies View RelatedI would like to know, whether is it possible to make soft blends between all objects of the person in the art I am creating. The problem is, that I want to make very smooth transition between all paths(brush strokes) in the file. I tried the blend tool, but it didn´t work good for this purose. Then I tried to blur or feather all objects, but the result wasn´t good as well. Opacity masks would be too complicated for all those strokes. Is it possible to make this work for all brush paths in the file?
View 1 Replies View RelatedWhen creating strokes with the calligraphic brush (using an Intuos5), I noticed that the eraser tool breaks the stroke thickness when apllied to the calligraphic stroke. The entire stroke defaults to an undesired,uniform thickness.
See video here: [URL] ...
So why does this happen? Is there some way to prevent the eraser from destroying the stroke thickness?
What is the correct technique for selecting paths with multiple strokes of the same colours?
Select Same doesn’t seem to work properly since it only selects one of the stroke colours.
I have several paths with the same stroke colour makeup yet they don’t behave as if they have the same appearance, depending on which of a path’s several strokes is selected in the Appearance panel.