When you centrally allign text horizontally and vertically in a text box, the text sits slightly high of the centre. Is there any way of setting an action or setting to deal with this rather than adjusting by eye every time?
View 4 RepliesHow do I enlarge a text or color box vertically or horizontally?
View 2 Replies View RelatedThe Inset Spacing settings within the Area Type Options drop-down are just too cumbersome. Is there an easier way to center text within a text box like we can do in InDesign? Why they left this out of Illustrator CS6.
View 2 Replies View Relatedis there any possibility in GIMP to align a text not vertically at the bottom of a text box (there are options for left, right, center and fill but that's only the horizontal alignment). The motivation is, that I change a text in an image quite often and it whould "align itself" if it whould always be aligned at the bottom of the textbox.
View 3 Replies View RelatedI am creating a banner for a website. The banner is say 400 pixels wide by 60 pixels high. I drag the horizontal type tool so that it covers the entire rectangular shape exactly. I can center the text horizontally by selecting Window-->Paragraph and then selecting the center button. However I can't seem to center the text vertically in the banner using some Photoshop option. Once the text is typed then I can move it to what I think is vertically centered but it may not be exact.
The reason I am looking for exactness is I have to create several banners that are the same dimension but the text within will be different. Some of the banners will be one line and others will be two lines. I would prefer to vertically center them exactly.
I select the text tool then drag it to make a box. I type text into, but it always go to the top. Is there way to make all of the text inside that box automatically center vertically?
View 9 Replies View RelatedI'm trying to work with some transparent text stuff and I can't seem to center it vertically. I have no problem doing it with regular text but using the Horizontal Type Mask Tool it doesn't seem to allow me to do it.
View 4 Replies View RelatedIs there a way to align more than 2 objects either horizontally or vertically? I've used the ALIGN command and I can't get it to work. I get a message that says something like: "all 3 destination points are colinear".
I can get it to work if I'm just aligning two objects.
For instance, say you have four boxes, scattered around model space, and you want to align the left edge of three of them to the left edge of the fourth box, without moving them vertically. In other words, can you "left justify" all four boxes?
My boss is using CorelDraw x5 on a Dell Studio lappy w/ win7 x64, his question is... If you accidentally stretch text and don't realize it till later is it given a value that can be compared to other text so you can conform it to the rest of the text? Is this a tool or what? The scenario is you accidentally stretch text minutely, save the file, copy and paste this text to another file with same format to realize later it has been manipulated and doesn't match.
View 2 Replies View RelatedI have to copy two lines of text into hundreds of images, and one piece has to be centered, 3 pixels from the top, the other centered at the bottom? Is there a way to make an action that will place things in the center, regardless of image size?
View 1 Replies View RelatedIt has been a while since I've been here and I REALLY need emergency assistance because my mind has gone completely blank with AGE.
I'm trying to create an action which I will be using for batch processing.
I have an image on which I need to place 3 text layers
The first layer I need to center across the image about 100px from bottom
The second layer I need to center across the image about 300px from bottom
The third layer I need to place about 200px in from the right edge and about 600px from bottom
When you open a text box how do you center the text in the middle from top to bottom(vertically), not left to right. The text starts immediately in the top left corner. I need it in the center of a predefined text box size, so that if you drew a line across the center of the box from left to right, the top half of the letters would be above the line and the bottom half would be below the center line. In other words there should be the same distance above the words to the top edge of the text box, as to the bottom of the text box, from the center.
View 5 Replies View RelatedUsing: Land Desktop Companion 2009
Issue: Imbeded text in Linetype is automatically orienting the top of the text toward the center of the arc. I have tried to "reverse polyline" to fix this, but the text will not change. Is there a line property that I am missing that will allow the text to orient itself as readable from arc Point of begining to the end?
In the dragged state, I don't want to use 'As Composed' because the label is composed to be parallel to the line, but I want it to flip to horizontal to the view when dragged. This is working fine with 'Stacked Text'
What is not working is the text justification. I want it to remain centre justified, as it is composed. But there doesn't seem to be any option for this when you use the 'Stacked Text' option for the dragged state. I thought that setting the 'Leader Justification' to false might do it, but that just makes it always left justified. Am I missing something here? Is there no 'Top right/bottom right/middle center/top left.....' option for Stacked Text? And if not, why not?
I'm in 2011.
I do a lot of CD designs, and often I have my text centered on the front covers. When I put the text centered, however, PSP is added an extra space to the end of text, so when I center it on the canvas the text is actually off-center to the left. When I go into edit the text, there is no space on the right of the words to delete.
With the text selected this is how it looks: The right edge of the frame should be flush with the right edge of the last 'T'.
I'm creating a logo that consists of the word DIFFERENT in text and a shape, a dot (an ellipse) that I want to appear above the I and be vertically aligned with I.
How can I do this?The problem is that I can't see how to identify the point in the text - the centre of the I - to act as the target. I can't seem to get any of the Snap to Object tools to work.
I feel that I should be able to mark a specific point anywhere on a shape or an object and use those points to align.
I suspect that I could achieve the effect that I want by splitting the text characters up into individual objects, than I can align them more obviously but then I set up some other issues with kerning.
I have been putting together some inserts for a sales presentation folder in Illustrator CS6. I am having trouble trying to figure out possibly how to make my text align as presentable as possible. If you view the image you can see that my text on the right is not aligned with each other line consistently.
View 3 Replies View RelatedI don't know if this is possible at all in Illustrator, but I want to align objects to text paths. Look at the following example.
I start with something like a circular hierarchy, that I get as an output from another program. These are only lines and text. Now I want to add a flag behind the text. This flag should have the same orientation as the text path.
As this hierarchy is actually pretty big (this is only a snippet), I don't want to rotate all the flags manually. I tried to do it manually with the below example, but it still doesn't looks right...
Is this a proper method to rotate the flags according to the orientation of the text paths in Illustrator?
I'm new to Ai, and I'm working off of a 2 column end movie credit scroll with a space between them.
The formatting/alignment is fine and I simply need to replace the names in each column. However, the text is not behaving how I'd like it to. When I type text in the left column, I'd like the text to move to the left, but when I type it goes to the right (into the middle space), pushes the text in the other column to the right and messes up the formatting.
Is there a setting or way to make the text go to the left?
How i can align vertical center and horizontal center a single line text to a shape (in vbs) ?
View 1 Replies View RelatedLeft: 'vertical align bottomed text with the box of black stroke
Right: manually moved text with smart guide to align with its base line.(what I want to achieve)
As you can see in the left one, text has its base line under itself, and its bounding box doesn't match its base line. when I use align, it doesn't align using its base line but its bounding box.How can I make text align using their base line easily?
Once I have generated text on a page (eg for a Title), how can I centre it horizontally.
Then, if there a two text entries. one above the other, how can I space them vertically.
I'm writing down some names & seeing how they'd look like when I use a different font but just now, I've realized that the text slightly blurs when it's rotated.
Original text: [URL]
Rotated: [URL]
I know this isn't much of a big deal but I'm just wondering if there is a way to prevent the blurring or anything like that. I tried 'sharpening' the selection but as far as I'm concerned, it didn't change anything.
Photoshop text is being stretched vertically. My text settings are at 100%.
View 1 Replies View RelatedI'm trying to do, but it's horizontal. I need to do it vertically with the letters on top of each other, not with the letters turned sideways, as in the "vertical text tool"
View 3 Replies View RelatedI have tried tooth and nail to use the Path tool and every tutorial explains it so simply but nothing will work. I cannot text to path.It should be so simple but it is not. I make a vertical path then select the text tool and type my text. Then hit text to path and nothing happens.Rotation doesn't give me the same quality in the final result so that's out.
View 8 Replies View Relatedhow can I insert text vertically in my photo.
View 3 Replies View RelatedI have 4 lines of text. They are currently in 4 separate layers as they are 4 separate buttons. How do I make sure the verticle space between them is even?
View 1 Replies View RelatedWhen I mirror horizontally and print the text will not show up. I can print fine Vertical, normal but not horizontal?
View 2 Replies View RelatedI have been using the multiline text quite successfully. When i was playing with inserting tables, i rotated my text in the tables.
Now when i use my multiline test on my plans they also automatically are set up vertically and not horizontally anymore.
Where can i rectify this. On the properties the rotation angle is set at 0 degrees.
Text is allowed only on the outside of a rectangle shape. The text cursor disappears when I try to enter it into the rectangle and when I place it on the edge of the rectangle, it rurns into a slanted "A" and allows texting on the border of the rectangle. Corel Paint Shop Photo Pro X3 (build date Sept 7, 2010). This software came with my new HP Pavilion dv7.
View 1 Replies View Related