I'm writing down some names & seeing how they'd look like when I use a different font but just now, I've realized that the text slightly blurs when it's rotated.
Original text: [URL]
Rotated: [URL]
I know this isn't much of a big deal but I'm just wondering if there is a way to prevent the blurring or anything like that. I tried 'sharpening' the selection but as far as I'm concerned, it didn't change anything.
In modelspace I have a drawing that is aligned perfectly, but when I create a new viewport in a layout the drawing that was created in modelspace seems slightly rotated in the layout view?
View 3 Replies View RelatedI have a 70x70 image that i need to shrink down to 40x40 in the preview when i shrink it down the image looks bloody perfect, however when i select OK it just blurs everything up. why cant gimp just keep the quality it has in the preview? its like it deliberately wants to ruin my day. I reduced the image in Cubic and in Sinc but neither was good enough.
View 1 Replies View RelatedWhen you centrally allign text horizontally and vertically in a text box, the text sits slightly high of the centre. Is there any way of setting an action or setting to deal with this rather than adjusting by eye every time?
View 4 Replies View RelatedMy boss is using CorelDraw x5 on a Dell Studio lappy w/ win7 x64, his question is... If you accidentally stretch text and don't realize it till later is it given a value that can be compared to other text so you can conform it to the rest of the text? Is this a tool or what? The scenario is you accidentally stretch text minutely, save the file, copy and paste this text to another file with same format to realize later it has been manipulated and doesn't match.
View 2 Replies View RelatedI'm trying to crop a rectangle that is slightly off square, so the cropping rectangle is either clipping part of the image or not enough of the empty space. Is there a way to clip a non-rectangular area?
The images are actually parts of a map as a specific projection, and need to be clipped non-rectangular so they match up.
I am trying to combine these two images (I want to keep the very top of the first image but I like the second image better...there is just not enough of her hand). How would I be able to accomplish this while also getting the perspectives to match up? I can get the hand looking ok, but then the rest of the image is funky because nothing else matches.
View 3 Replies View RelatedI cannot get an added layer to show slightly transparent. I like the effect of bringing the main layer to the front and having most of the focus there with a slightly transparent layer for text, etc. Every time I try to use the transparent/opaque slider in the layer panel, it does nothing until I cross the 50% threshold and then the layer just disappears if I go below 50%. I originally had a .gif, but I tried saving it as .png, and .xcf (gimp file) and it still would not work.
Interestingly, I tried it on another .png I had and it worked.Why would it not work sometimes and then work other times? I have attached an example file. I wam trying to make the new layer with text slight transparent.
EDIT: it will not let me upload the file, it eeps saying "undefined", but if you want an example of what I'm doing check out [URL] ...., my website with previous example of slightly transparent layers made in paint.net
How to make a banner that shakes/blurs from side to side?
[URL]....
The link above is an image of what I'm talking about. (The black banner that says Diamonds aren't forever)
I wonder if it is possible to create a new text style where one can set the text to be already rotated.
I know that it is possible to rotate text in many ways but the styles always seem to be set on the horizontal to begin with.
C3D 2012
Win 7 64 i5
8GB RAM Quadro FX 1800
Using Gimp 2.8 and able to rotate brushes, how would I save the rotated brush?
View 1 Replies View RelatedI'm trying to rotate an image. Actually, I figured out how to rotate it. But I can't figure out how to fill in the "empty" triangular areas that represent the area between the edges of the original image and the horizontal and vertical edges of the canvas. I would like to fill these spaces so it is not obvious that the image was rotated. How can I do this?
What is the standard way to manipulate images in this manner?
I've attached a sample image that I rotated.
I am working on a project that has around 6 different roads, all at different angles from one another. The problem I have is when I start to create the lay-outs, I use a rotated viewport so that the roadway will be horizontal across the page. I then rotate the text so that it will be horizontal or at 90 º within the viewport. This has worked fine in the past.
With this project I have multiple areas that are sharing 2 or 3 different viewports, therefore, the text alignment for one does not match the other.
Is there a way to associate the alignment of the text to the viewport? Or will I have to copy the drawing multiple times (one for each viewport)?
I received a 3d map and I just need to plot it out but the text is rotated so much it almost illegible is it possilbe to flatten it to 2d? If I just put the map in 2d space the text is smashed down so it looks like a line.
View 5 Replies View Relatedin ps my text looks fine,. but when i go to preview for plotting its rotated 90 deg.
View 1 Replies View RelatedI have read many topics that talk about TTF text printing bold under various circumstances, but have not found one addressing my exact issue. I have attached a PDF with which I hope to illustrate my problem.
I have a non-annotative, Scale = 1, all elevations = 0, block; My text is PDF's as text whenever the block is left at 90 or is exploded then rotated. But whenever the blocked is rotated (any amount) the text is no longer interpreted as text, it prints bold.
I need to be able to align my blocks to other, rotated, objects in both model and paper space; so this issue is causing my a fair amount of grief. I have been told switching to a shx font is out of the question.
I'm having an issue on my full scale detail sections for a set of entry doors. I used layoutwizard to create my layout and I'm adding text (dtext) and leaders and it all looks good on my screen. When I print it out the text is rotated 90 degrees. I imagine it's any easy fix but I sure can't find it.
I thought I should add- when I look at 'print preview' the text is rotated. When I go back to the layout the text looks correct. I tried unchecking the "match text orientation to layout" and checking it again and it didn't work. Seems like this might be a glitch of some sort?
update: If the text is in model space it prints properly. Only the text in paper space shows up rotated.
I've created my first line type (woohoo!) but the rotated V that I used as an "arrow" won't center and I'm having a difficult time understanding why so that I can fix it. I am aware that linetypes like the one I created exist but I wanted the arrows a specific size and distance apart which I couldn't do with the existing linetypes available to me (also I really wanted to try creating a custom one).
In the attached picture:
-the green line is the finished custom linetype
-the red lines are polylines
-the blue text is rotated 90 degrees, set to a text style titled Linetype (simplex font, not annotative, height set to 0 and width set to 1.0), and Justify set to Bottom Center
linetypes-Model.pdf
The finished linetype code is:
*STREAM_LINE_W_ARROW_BIG,Stream_Line_W_Arrow_Big
A,.392629,["V",Linetype,y=-.07619,s=.2,u=90],.207371,-.144393,.011213,-.138787,.011213,-.138787,.011213,-.144393,.392629,["V",Linetype,y=-.07619,s=.2,u=90],.207371
Also, this the first time I've attached a picture, I'm not sure that I did it correctly.
We have some blocks that have static text labels on the left and numeric attributes on the right. When these blocks are rotated so the text is near vertical the static text has a bold appearance.
If you explode/burst the block then this 'bold' appearance goes away. If you rotate the text to normal then the effect disappears as well. The bold appearance shows up on a plot as well. The effect is subtle at times but noticeable.
Sample drawing attached, see the block near the top of the drawing and a copy of it rotated to normal. Use the BURST command on the block on the left to see the change.
Rotated text.cdr
How can I stop new text boxes being rotated? When I make a new text box (or start typing artistic text) using the text tool, the box (or artistic text) is rotated 90° clockwise. The tabs also show on the left hand ruler instead of the top one. I have looked at all the options in the Tools menu but there does not seem to a way of changing this. I have attached a CorelDraw file as an example.
I am using CorelDraw 14.0.0.701 from Graphics Suite 4. My PC is running Windows XP Pro, Service Pack build 2600.
I have just discovered that Spot Elevation text is mesbehaving in rotated dependent views:
If you have an orthogonal parent plan view, then create a dependant view from it, then rotate just that dependant view, then place a spot elevation - the spot elevation symbol respects the rotation of the view (ie its paralel to screen/view boundary), but the spot elevation text remains in the orientation of the parent view. see attached image.
This does not happen if you rotate a normal Revit plan view; nor does it happen with a callout - both cases the symbol and the text are parallel to the view boundary. I think this is a bug?
I have two lights in action. One spot with falloff and spread and one directional.
The directional light only show an effect on the text if I rotate it, but moving it along the Y-axis perpendicular to the text shows no changing effect.
This is probably very easy, but I cant figure it out. Whenever I try to type text on the spine of my lightroom book, Lightroom puts it horizontally. I like to rotate the text on the spine of my book by 90 degrees so that it reads from top to bottom, like on any normal book. How do I do that?
By the way, when I start a new book, the spine text appears correctly by default (rotated by 90 degrees). In my existing book, the text cursor appears only for horizontal flow however, despite using the same design template. Is this a bug or did I accidently change the orientation of the text?
When creating text in model space it appears both mirrored and rotated 90 degrees to the horizontal. However, when I create text in paper space it is fine. I have tried looking at the properties for the text but although I can find a place to rotate the text back to the horizontal it is still mirrored and therefore unreadable.
When I copy paste stuff from one document to another this also occurs.
I have created an 18 layered object on Corel Draw X4 using vectors and I would like to make it blur and streak from the back, to create the illusion that it's actually in high motion.
I have tried looking for the answer to my question on this site and elsewhere and only find the answer if it were a bitmap, yet I don't necessarily want to transfer it into bitmap as I would like to keep the smooth edges.
Object above is just a typical path.Below is a copy with a 51px Gaussian Blur applied. (using 300DPI Raster Effects Settings).
View 3 Replies View RelatedHere's a before and after shot. I recently upgraded from CS3 and the spot healing brush always worked great. Now when I use it, whether or not I use content aware fill, it leaves a blurred residue of what I was trying to remove. As an aside, the Content Aware Fill leaves a similar residue, enough to make it effectively unusable.
I have included a sample photo of the spot healing brush problem. Left side is before and right side is after. I just wanted to get rid of the electrical wall socket. You can see that it's not working. I am running windows 8 in a 64-bit environtment and running the 64-bit version of Photoshop CS5.5
Adobe Photoshop Version: 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch]) x64
Operating System: Windows NT
Version: 6.2
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
[code]....
There used to be a circle onscreen that you could turn to change the amount of blur. And there were lines and or oval areas that could be made bigger or smaller to influence the area of blur. And while there are still pins that can still be placed to further control the blur, they don't really work. I also have the same problem with the new lighting effects as well.
View 9 Replies View RelatedI am using both Paint Shop Pro X3 & Video Studio X3. I'm putting together a slideshow and when I use Pan & Zoom to zoom on a particular subject (as a bee on a flower) after so much zoom the picture blurs. I have a very good camera and the photo remains sharp in Paint Shop Pro in extreme zoom. Is there a way to sharpen the image while zooming in Video Studio?
View 4 Replies View RelatedI try to do the radial blur it only blurs one thing at a time.
manually right clicked and rasterized everything and then merged them and it seemed to work, but there's got to be an easier way to do this.
How can I keep everything on the same layer?
For some reason, when I try to create a transparent object with a low opacity material, the object underneath it seems blurred out as if the texture res of the inside object is very low. once I hide the transparent object it returns to normal.
Unfortunately it also looks like that when saving an image.
I tried playing around with the material and with the preferences of Mudbox but couldn't find a solution.