Using: Land Desktop Companion 2009
Issue: Imbeded text in Linetype is automatically orienting the top of the text toward the center of the arc. I have tried to "reverse polyline" to fix this, but the text will not change. Is there a line property that I am missing that will allow the text to orient itself as readable from arc Point of begining to the end?
I've created my first line type (woohoo!) but the rotated V that I used as an "arrow" won't center and I'm having a difficult time understanding why so that I can fix it. I am aware that linetypes like the one I created exist but I wanted the arrows a specific size and distance apart which I couldn't do with the existing linetypes available to me (also I really wanted to try creating a custom one).
In the attached picture:
-the green line is the finished custom linetype
-the red lines are polylines
-the blue text is rotated 90 degrees, set to a text style titled Linetype (simplex font, not annotative, height set to 0 and width set to 1.0), and Justify set to Bottom Center
linetypes-Model.pdf
The finished linetype code is:
*STREAM_LINE_W_ARROW_BIG,Stream_Line_W_Arrow_Big
A,.392629,["V",Linetype,y=-.07619,s=.2,u=90],.207371,-.144393,.011213,-.138787,.011213,-.138787,.011213,-.144393,.392629,["V",Linetype,y=-.07619,s=.2,u=90],.207371
Also, this the first time I've attached a picture, I'm not sure that I did it correctly.
When you centrally allign text horizontally and vertically in a text box, the text sits slightly high of the centre. Is there any way of setting an action or setting to deal with this rather than adjusting by eye every time?
View 4 Replies View RelatedIn the dragged state, I don't want to use 'As Composed' because the label is composed to be parallel to the line, but I want it to flip to horizontal to the view when dragged. This is working fine with 'Stacked Text'
What is not working is the text justification. I want it to remain centre justified, as it is composed. But there doesn't seem to be any option for this when you use the 'Stacked Text' option for the dragged state. I thought that setting the 'Leader Justification' to false might do it, but that just makes it always left justified. Am I missing something here? Is there no 'Top right/bottom right/middle center/top left.....' option for Stacked Text? And if not, why not?
I'm in 2011.
Is there a way to automatically condense text in a one line text box, I have linked text boxes vertically and want to paste a list of names into them, and if a name is too long I want it to condense to the text box.
I know how to do this in print merge with the envelope tool but not in a text box.
I do a lot of CD designs, and often I have my text centered on the front covers. When I put the text centered, however, PSP is added an extra space to the end of text, so when I center it on the canvas the text is actually off-center to the left. When I go into edit the text, there is no space on the right of the words to delete.
With the text selected this is how it looks: The right edge of the frame should be flush with the right edge of the last 'T'.
The Inset Spacing settings within the Area Type Options drop-down are just too cumbersome. Is there an easier way to center text within a text box like we can do in InDesign? Why they left this out of Illustrator CS6.
View 2 Replies View RelatedCurrently in process of a quick fix, trying to create a linetype that should place a number in between the lines.
*One, Places 1 in between lines A,5000,-50,["1",CompatecStandard,U=0,Y=-125],-150
That's as far as I've gotten and it pretty much does what I want it too, but right now it is set to 5000mm before it makes a gap with a number. I would like that gap to be dependent on the length of the line... is that possible?
For example, if the line is only 4000mm I want the gap to be after 2000 instead of 5000.
AutoCad LT 2014
I am having an issue with the "upright" script in my ltype descriptions. Apparently it works the way it is supposed to and not the way I want it to.
The upright is set to 0 which orients the text in linetypes to be shown as "upright" to the model space. In most design cases; not an issue, but I am designing construction plans along a roadway and as such, north is not always "upright" to my viewport. Is there a script (ie ...,u=v],... or ...,u=vp],...) that will orient my text based on the line displayed in the viewport?
I'll start by saying that I'm using Civil 3D 2012...I've made a custom line type and am having issues with it. Basically, I'm trying to get the text (Green line with 4's) to flip around from it's current orientation, see attachment. I have already tried the REVERSE and MIRROR commands, with no success.
View 6 Replies View RelatedI'm trying to center text in a linetype, but at certain angles the text will no longer be centered.
Here is the linetype coding: A,1,-.25,["W",STANDARD,S=.2,U=0.0,X=-.1,Y=-.1],-.15
LINETYPE.jpg
Notice that the text on the vertical line are skewed the most.
I select the text tool then drag it to make a box. I type text into, but it always go to the top. Is there way to make all of the text inside that box automatically center vertically?
View 9 Replies View RelatedHow do I create a linetype with text that is similar to the waterline linetype or sanitary sewer linetype?
View 3 Replies View RelatedI made a custom linetype to represent a pipeline. The line is abbreviated by 5 letters. My problem is when I reach and curve in the pipe (an elbow), the text string does not follow the curve. It remains straight for the remainder of the text. Is there a way (autocad 2013) to have the text follow the path of a curve?
edit: I saw one similar topic from 2008 in this thread: [URL] and the best response there is the one posted by eldon where you break the code down to each letter. Still, the picture in eldon's post makes the text a bit jagged. Have any changes been made to AutoCAD since this post that make this easier?
I am trying to create a linetype(actually multible linetyes) for Civil drawings. I need the line type to have the following text..........12" W. I have tried to edit and existing linetype but for some reason the string does not seem to like me using the inch (") symbol. Any proper way to generate this linetype and I should be able to edit it to get all the other line sizes I need.
View 5 Replies View RelatedI made a custom line type called EX (for existing pipes) which looks a little bit like this: - - - EX - - - EX - - - EX - - -
Line works great when I draw from left to right. However, when I draw a line from RIGHT to LEFT, the text displays upside down a little bit like this: - - - X3 - - - X3 - - - X3 - - - ("3" representing the mirror image of "E")
Same applies when drawing from bottom to top, or top to bottom. I totally understand the behavior here, and TBH I think it's OK it behaves that way.
Let's say I'm drawing existing water pipes going in all directions with a polyline. Is there a way to make the text display upward no matter what direction the pline is going?
Im trying to make a linetype that is hidden with text in it. Is that possible? Ive got all my linetypes customized with text, but trying to make them on a hidden linetype is tricking me.
View 5 Replies View RelatedI am using AutoCAD Civil 3D 2013 and just installed HotFix 3 (so I should be all up to speed). I have created a water linetype (---W---) and telephone linetype (---T---). The problem I am having is the 'W' and 'T' seem to flip at some of the nodes based on if the Polyline is going up or down (from left to right). When it is going up it displays right side up...going down it displays upside down. They are one single polyline with nodes.
I have tried REVERSE, PEDIT then Reverse, my linetype definition is set to U=0.0, but nothing has worked. I have redrawn other polylines and they all have the same issue.
Attached is a PDF of the polylines.
I'm drawing a gas line (the one that says gas throughout the length of the line) and i can't seem to scale the text 'gas' properly, it seems that it is all squashing up and i cant make out what it says. I've tried ltscale, psltscale and the actual linetype scale of the line to no avail. I'm sure this is a simple problem, i just cant work it out.
View 2 Replies View RelatedI'm trying to set up pipe styles that have a linetype with text in them. For example ------SFM------. They work fine for straight pipes. However on a curved pipe the text goes all funky. Not only is the text backwards it is also mirrored.
Is there likely something wrong with my linetype definitions or is that normal behavior with civil 3d pipes?
I am using Civil3D 2011 and I am working on 1:1 model space scale. When I go to paperspace and open a scaled viewport, the texts and linetype scales change. What can i o to make them look the same as in model space?
View 5 Replies View Relatedi had been using autocad for almost 10 years now and i always have the newer version for my line of work.
i am having trouble with the excessive styles that shows whenever i copy and paste then the problems occur after that most often. copy paste problems, fatal errors, and my computer hangs most of the time.
I draw a linetype in my file with text in it (HW), I need to flip the text (Not the line itself) ...how is this done?
View 9 Replies View RelatedI have created a custom linetype using a shape & also added text. I have tried countless combinations to have a different spacing for the text, without affecting the frequency of the shape.
I want there to be no space between the shape, just repeating. But I want the text to display only once for every 4 times the shape repeats. Is this at all possible?
Every time I change the text spacing, I get huge gaps in the between the shape and it seems that their spacing cannot be independently controlled.
I am now working for an oil company, nd we do arather a lot of work involving lifting plans with chain hoists etc.
My question is, is there any way of make a linetype that automatically draws chain. At the moment, i have to manually draw a link, and copy and paste with basepoint to the reuired length, and then "block" it. however, when we come to alter these drawings, they are a nightmare to alter all the chain sections.
If there was a way of developing a linetype that automatically made these chains, it would speed things up so much.
A way to create a box around text that automatically adjusts in length as the text is changed? I know you can use the tolerance command to create text in the datum identifier but I was really looking for something I could use with attributed text strings for blocks.
View 1 Replies View RelatedI have multiple of the same drawings. The drawing will stay the same but the device names will be different for each drawing. Is there a way to have a excel lookup table for each device and each drawing can reference to ?
View 1 Replies View RelatedI have been adopting a linetype scale system for CENTER & HIDDEN types that works perfect on one drawing but not in another.
Here it is:
Globally,
Measurement:1
MSLTSCALE:1
PSTLSCALE:1
CELTSCALE:1
LTSCALE:1
CENTER lines are scale 0.1 (works fine in all drawings and in both 1:30 and 1:4 viewports)
HIDDEN lines are scale 0.3 (work in one drawing but failed in the second drawing in both 1:30 and 1:4 viewport)
Setting the HIDDEN lines to 10 works with most other drawing.
I want to know first of all why this setting of 0.1 CENTER and 0.3 HIDDEN works on one drawing and not on another one in spite of the general settings set alright.
Is there a way to use text that will automatically orient itself to a 0 angle (left to right) in a viewport even if the viewport is rotated 90-degrees, or any degrees for that matter. Due to some pretty messy oriented viewports, My texts are rotated all over the place depending on what sheet I'm looking at.
View 3 Replies View RelatedI was wondering if it is possible to have sum sort of text referance in the layout ofa drawing.
example.
I have border with drawing details,date and who its done by.in multiple layouts
Is it possible to at text in 1 layout and it show up in all the other layouts automatically?
I have been using the multiline text quite successfully. When i was playing with inserting tables, i rotated my text in the tables.
Now when i use my multiline test on my plans they also automatically are set up vertically and not horizontally anymore.
Where can i rectify this. On the properties the rotation angle is set at 0 degrees.