Im trying to make a linetype that is hidden with text in it. Is that possible? Ive got all my linetypes customized with text, but trying to make them on a hidden linetype is tricking me.
View 5 RepliesI'm very new to AutoCAD but now I'm using LT 2014.
I'm trying to change my linetype from solid to hidden, and I've checked the properties, changed the linetype on my toolbar above, ensured the scale is set to 1, and zoomed in to make sure the scale is correct. I've unlocked all the layers, and checked all my different spaces to see if maybe there was a glitch that just wasn't showing the change in linetype. Nothing!
The properties for my linetype show me that the line is a dotted (hidden) line, but the line itself doesn't show as hidden.
I need a wall fill pattern that displays as a hidden linetype...in other words, like a polyline with a global width of 5" with a hidden linetype. Is this possible with an AEC wall?
This is obviously a commonly used drafting standard for fire-rated walls or other wall types, so I'm sure it has been addressed by Autodesk, I just cant figure out how to get the wall type.
How do I create a linetype with text that is similar to the waterline linetype or sanitary sewer linetype?
View 3 Replies View RelatedI am trying to create a linetype(actually multible linetyes) for Civil drawings. I need the line type to have the following text..........12" W. I have tried to edit and existing linetype but for some reason the string does not seem to like me using the inch (") symbol. Any proper way to generate this linetype and I should be able to edit it to get all the other line sizes I need.
View 5 Replies View RelatedI have been adopting a linetype scale system for CENTER & HIDDEN types that works perfect on one drawing but not in another.
Here it is:
Globally,
Measurement:1
MSLTSCALE:1
PSTLSCALE:1
CELTSCALE:1
LTSCALE:1
CENTER lines are scale 0.1 (works fine in all drawings and in both 1:30 and 1:4 viewports)
HIDDEN lines are scale 0.3 (work in one drawing but failed in the second drawing in both 1:30 and 1:4 viewport)
Setting the HIDDEN lines to 10 works with most other drawing.
I want to know first of all why this setting of 0.1 CENTER and 0.3 HIDDEN works on one drawing and not on another one in spite of the general settings set alright.
I am using AutoCAD Civil 3D 2013 and just installed HotFix 3 (so I should be all up to speed). I have created a water linetype (---W---) and telephone linetype (---T---). The problem I am having is the 'W' and 'T' seem to flip at some of the nodes based on if the Polyline is going up or down (from left to right). When it is going up it displays right side up...going down it displays upside down. They are one single polyline with nodes.
I have tried REVERSE, PEDIT then Reverse, my linetype definition is set to U=0.0, but nothing has worked. I have redrawn other polylines and they all have the same issue.
Attached is a PDF of the polylines.
I'm trying to set up pipe styles that have a linetype with text in them. For example ------SFM------. They work fine for straight pipes. However on a curved pipe the text goes all funky. Not only is the text backwards it is also mirrored.
Is there likely something wrong with my linetype definitions or is that normal behavior with civil 3d pipes?
I am using Civil3D 2011 and I am working on 1:1 model space scale. When I go to paperspace and open a scaled viewport, the texts and linetype scales change. What can i o to make them look the same as in model space?
View 5 Replies View RelatedI work with a drawing that for some reason don't have a proper fence line in it. I tried to load another .lin file, but still the fence line looks funny. The line I'm after looks and work ok in alla other files but this one!
I tried to copy paste a fence line from another drawing but what's pasted is just half the linetype...
The line should look like this -- / ---- / ---- / ---- but comes in as -- ---- ---- ----
Why do I loose the slashes?
*FENCEONBOUNDARY, Fence on boundary _____ / _____ / _____ / _____
A,.7,["/",STANDARD,S=.05,R=0.0,X=-0.1,Y=-.05],.1
The result should look like ----- / ----- / ----- / -----
I have just made a new linetype but the ends look funny...I can't see why the ends, before and after the slash are different lengths? How to make them more even?
View 9 Replies View RelatedUsing: Land Desktop Companion 2009
Issue: Imbeded text in Linetype is automatically orienting the top of the text toward the center of the arc. I have tried to "reverse polyline" to fix this, but the text will not change. Is there a line property that I am missing that will allow the text to orient itself as readable from arc Point of begining to the end?
what im trying to do is make my own linetype for specific jobs, ie a number of different lines named different things. so using the acad.lin file i have altered it and reloaded it but all my text doesnt look big enough or too big, i am using different drawings etc so i could be on a 1:100 or 1:50 etc, i would draw a polyline and it would be 70mm thick, the line obviously changes but the text height doesnt
View 9 Replies View RelatedIn our work we draw many symmetrical outlines. In many cases, chiefly due to space constraint, we draw only half the outline and use a centerline of the symmetry to dimension the part.
Our current method is to use sketches to achieve this. I wonder if there is a way that we can make this linetype available from the styles? Diagram attached below.
I am now working for an oil company, nd we do arather a lot of work involving lifting plans with chain hoists etc.
My question is, is there any way of make a linetype that automatically draws chain. At the moment, i have to manually draw a link, and copy and paste with basepoint to the reuired length, and then "block" it. however, when we come to alter these drawings, they are a nightmare to alter all the chain sections.
If there was a way of developing a linetype that automatically made these chains, it would speed things up so much.
I have two object intersect each other ,when i select one of the object the edges that in the intersect part is hidden! how can i make them visible?
I have this problem in autocad 2012, In autocad 2011 there was no problem.
I am wondering if it is possible to make a linetype that is essentially two continous lines (Or small dashes lines) overlayed atop one another. The purpose for this is to create a shadow effect (we use this for text on aerial imagery). The bottom line would be a thick white/black line and the top line would be the opposite so it stands out.
View 1 Replies View RelatedSome of objects that I draw have partly hidden lines. Basically I can create two lines and then set one to be solid and the other one to be hidden. But may I know any faster way to do that?
View 3 Replies View RelatedI have a Civil 3D AECC table that I want to use in Excel but these entities can't be copied and pasted. I have exploded it a few time to get simple lines and text and want to convert these into an AutoCAD table for export to Excel.
I have searched forums and have found a few lisp routines (e.g. maketable.lsp at [URL]) but they don't work.
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
About 6 years ago some people in the Land Desktop group were complaining about not being able to move the text in a linetype so as not to obscure other entities.
how I went about it and a drawing showing an example. Drawing is 2012.
I don't say this is going to replace linetype. I'm also going to see if there's a better way of doing this with Civil Objects. But I've wanted to figure this out for a while and had some down time today. So this is for you to play with if you want. I was looking at my Undocumented Commands file and that reminded me of it since this done with un(or little)documented commands.
If you open the drawing. Select one of the magenta circles (nodes) in the center of the text to activate grips. Select a triangular grip and use it to slide the text along the polyline.
Currently in process of a quick fix, trying to create a linetype that should place a number in between the lines.
*One, Places 1 in between lines A,5000,-50,["1",CompatecStandard,U=0,Y=-125],-150
That's as far as I've gotten and it pretty much does what I want it too, but right now it is set to 5000mm before it makes a gap with a number. I would like that gap to be dependent on the length of the line... is that possible?
For example, if the line is only 4000mm I want the gap to be after 2000 instead of 5000.
AutoCad LT 2014
I am having an issue with the "upright" script in my ltype descriptions. Apparently it works the way it is supposed to and not the way I want it to.
The upright is set to 0 which orients the text in linetypes to be shown as "upright" to the model space. In most design cases; not an issue, but I am designing construction plans along a roadway and as such, north is not always "upright" to my viewport. Is there a script (ie ...,u=v],... or ...,u=vp],...) that will orient my text based on the line displayed in the viewport?
I'll start by saying that I'm using Civil 3D 2012...I've made a custom line type and am having issues with it. Basically, I'm trying to get the text (Green line with 4's) to flip around from it's current orientation, see attachment. I have already tried the REVERSE and MIRROR commands, with no success.
View 6 Replies View RelatedI'm trying to center text in a linetype, but at certain angles the text will no longer be centered.
Here is the linetype coding: A,1,-.25,["W",STANDARD,S=.2,U=0.0,X=-.1,Y=-.1],-.15
LINETYPE.jpg
Notice that the text on the vertical line are skewed the most.
my linetype scales in model space look good, when i go to paper space to print the linetypes are huge and way out of wack. what is my problem?
View 3 Replies View RelatedI have a polyline in my drawing, consisting of arcs and lines all joined together. It is a waterline and I cannot get it to reverse.. it is reading ----M----- instead of -----W-----
View 9 Replies View RelatedUsing civil 3D 2012:
I have a storm linetype that looks like this"---STM----------STM----------STM---". The STM text within the linetype is reading upside down since it is placed past the 90°mark (i.e. from 11 o'clock to 5 o'clock).
Tried blocking the line out and rotateing.
Tried grouping the line and rotating.
Tried reverse comand.
Tried joining a line to it to trick it into fliping.
I made a custom linetype to represent a pipeline. The line is abbreviated by 5 letters. My problem is when I reach and curve in the pipe (an elbow), the text string does not follow the curve. It remains straight for the remainder of the text. Is there a way (autocad 2013) to have the text follow the path of a curve?
edit: I saw one similar topic from 2008 in this thread: [URL] and the best response there is the one posted by eldon where you break the code down to each letter. Still, the picture in eldon's post makes the text a bit jagged. Have any changes been made to AutoCAD since this post that make this easier?
I made a custom line type called EX (for existing pipes) which looks a little bit like this: - - - EX - - - EX - - - EX - - -
Line works great when I draw from left to right. However, when I draw a line from RIGHT to LEFT, the text displays upside down a little bit like this: - - - X3 - - - X3 - - - X3 - - - ("3" representing the mirror image of "E")
Same applies when drawing from bottom to top, or top to bottom. I totally understand the behavior here, and TBH I think it's OK it behaves that way.
Let's say I'm drawing existing water pipes going in all directions with a polyline. Is there a way to make the text display upward no matter what direction the pline is going?
The contour lines themselves are in model space. The contour texts are in paper space. How do I make the line hide under the text?
View 4 Replies View Relatedhow to make make block attributes text visible next to my blocks?
View 4 Replies View Related