AutoCAD Civil 3D :: Text Linetype Flips At Nodes
May 23, 2013
I am using AutoCAD Civil 3D 2013 and just installed HotFix 3 (so I should be all up to speed). I have created a water linetype (---W---) and telephone linetype (---T---). The problem I am having is the 'W' and 'T' seem to flip at some of the nodes based on if the Polyline is going up or down (from left to right). When it is going up it displays right side up...going down it displays upside down. They are one single polyline with nodes.
I have tried REVERSE, PEDIT then Reverse, my linetype definition is set to U=0.0, but nothing has worked. I have redrawn other polylines and they all have the same issue.
Attached is a PDF of the polylines.
View 3 Replies
ADVERTISEMENT
Sep 8, 2011
I do not want the leader and label to flip. Is there a setting to keep the leader and label on one side? When I drag the left to a certain point the right note is the result. I want the bottom note to be the result.
View 5 Replies
View Related
Feb 18, 2013
How do I create a linetype with text that is similar to the waterline linetype or sanitary sewer linetype?
View 3 Replies
View Related
Mar 12, 2013
I am trying to create a linetype(actually multible linetyes) for Civil drawings. I need the line type to have the following text..........12" W. I have tried to edit and existing linetype but for some reason the string does not seem to like me using the inch (") symbol. Any proper way to generate this linetype and I should be able to edit it to get all the other line sizes I need.
View 5 Replies
View Related
Aug 9, 2013
Im trying to make a linetype that is hidden with text in it. Is that possible? Ive got all my linetypes customized with text, but trying to make them on a hidden linetype is tricking me.
View 5 Replies
View Related
May 30, 2013
I'm trying to set up pipe styles that have a linetype with text in them. For example ------SFM------. They work fine for straight pipes. However on a curved pipe the text goes all funky. Not only is the text backwards it is also mirrored.
Is there likely something wrong with my linetype definitions or is that normal behavior with civil 3d pipes?
View 3 Replies
View Related
Jun 6, 2013
I am using Civil3D 2011 and I am working on 1:1 model space scale. When I go to paperspace and open a scaled viewport, the texts and linetype scales change. What can i o to make them look the same as in model space?
View 5 Replies
View Related
Jun 15, 2011
Using: Land Desktop Companion 2009
Issue: Imbeded text in Linetype is automatically orienting the top of the text toward the center of the arc. I have tried to "reverse polyline" to fix this, but the text will not change. Is there a line property that I am missing that will allow the text to orient itself as readable from arc Point of begining to the end?
View 2 Replies
View Related
Nov 30, 2012
I have trying to run lift station simulations and my calculation nodes are always flooding. They don't flood in real life so what could be a problem?
View 6 Replies
View Related
Oct 8, 2013
If I draw lines between nodes and then list the lines it gives me slope distances. how can I set it to draw 2D lines but still have 3D nodes? I want my points to display the correct elevation but when I draw lines connecting them I want the line to be 2D so when I list them I get the correct bearing and a horizontal distance.
View 5 Replies
View Related
Nov 18, 2013
I import a text file. I look at the coordinate list in the toolspace under the survey tab and the coordinates listed are correct. but the nodes in the drawing are 4 feet off.
View 5 Replies
View Related
Aug 19, 2013
difference (and the utility) for displaying a flooded (blue) and a surcharged (red) node? I assume that the surcharged (red) node is when water is bubbling out of the grate, what is the flooded node, and when would I want to check on the flooded nodes?
Civil 3D 2013 SP1, Win 7-64 bit
12GB RAM
View 2 Replies
View Related
Nov 25, 2013
I imported survey data and had auto lines drawn. then I rotated my points/nodes. -- how do i get my linework to update?
View 4 Replies
View Related
Jul 27, 2012
My surveyor gave me a topo survey done in no particular coordinate system. He set up his total station on a PK nail and gave it a coordiante of (5000, 5000, 100). I used this survey to generate a surface.
I also have a site survey of the same site, done in state plane coordinate system. the two surveys have mulitple common points; pk nails, iron pins ect.
What i need to do is move the points for the topo survey over to the survey that is in state plane. A simple move command will not do this.
How do i go about moving these points to thier correct location without having to manually edit the .txt file?
View 3 Replies
View Related
Dec 12, 2012
I have a master plan development that I am trying to model different wastewater flows scenerios for I am basically following this paper from AU 2011 [URL] but have a couple of issues I am trying to work around.
Basically I want to take a spreadsheet of flows determined for specific nodes and upload it into SSA quickly from the paper
I can see that you can write a shp file of the network and then add different flow scenerios to the .dbf file and them use the GIS import function of SSA to get the flows assigned in one hit.
The issue I have however is that my network is a prelimary design in Civil3d as pipes and structures and if I create a .sdf of the network and then.shps from that data I do not get the structure sump elevations, this is not something that created in the shp file export process,
To work around this I through maybe I could export the network from Cicil3d to SAA which gies me all the strucutres with the correct sump levels and then also create a .shp and .dbf file and add the flows and them do a GIS import of just the structures and merge them with the exisiting network as the structure names as exactly the same and therefore the gis import should find the correct structures.
However SSA does not and adds a second lot of nodes with the same structure name but with Junction in the front.
View 1 Replies
View Related
Jun 7, 2012
Currently in process of a quick fix, trying to create a linetype that should place a number in between the lines.
*One, Places 1 in between lines A,5000,-50,["1",CompatecStandard,U=0,Y=-125],-150
That's as far as I've gotten and it pretty much does what I want it too, but right now it is set to 5000mm before it makes a gap with a number. I would like that gap to be dependent on the length of the line... is that possible?
For example, if the line is only 4000mm I want the gap to be after 2000 instead of 5000.
AutoCad LT 2014
View 2 Replies
View Related
May 10, 2012
I am having an issue with the "upright" script in my ltype descriptions. Apparently it works the way it is supposed to and not the way I want it to.
The upright is set to 0 which orients the text in linetypes to be shown as "upright" to the model space. In most design cases; not an issue, but I am designing construction plans along a roadway and as such, north is not always "upright" to my viewport. Is there a script (ie ...,u=v],... or ...,u=vp],...) that will orient my text based on the line displayed in the viewport?
View 9 Replies
View Related
Jun 4, 2013
I'll start by saying that I'm using Civil 3D 2012...I've made a custom line type and am having issues with it. Basically, I'm trying to get the text (Green line with 4's) to flip around from it's current orientation, see attachment. I have already tried the REVERSE and MIRROR commands, with no success.
View 6 Replies
View Related
Jul 23, 2013
I'm trying to center text in a linetype, but at certain angles the text will no longer be centered.
Here is the linetype coding: A,1,-.25,["W",STANDARD,S=.2,U=0.0,X=-.1,Y=-.1],-.15
LINETYPE.jpg
Notice that the text on the vertical line are skewed the most.
View 1 Replies
View Related
Mar 31, 2013
I want to turn off the text nodes highlighted in yellow below.
I know what they are for but I do not need them
I am running CorelDraw X6.
View 9 Replies
View Related
Dec 7, 2012
I'm having all kinds of trouble with these dynamic blocks.
This one should be simple, but I can't even get it to work! Please take a look at the drawing... when you flip it, it flips everything (as it should), but the stretch grip goes "up", instead of staying in the middle of the box in the flipped state.
View 2 Replies
View Related
Mar 22, 2012
my linetype scales in model space look good, when i go to paper space to print the linetypes are huge and way out of wack. what is my problem?
View 3 Replies
View Related
Dec 17, 2012
I have a polyline in my drawing, consisting of arcs and lines all joined together. It is a waterline and I cannot get it to reverse.. it is reading ----M----- instead of -----W-----
View 9 Replies
View Related
Oct 2, 2013
Using civil 3D 2012:
I have a storm linetype that looks like this"---STM----------STM----------STM---". The STM text within the linetype is reading upside down since it is placed past the 90°mark (i.e. from 11 o'clock to 5 o'clock).
Tried blocking the line out and rotateing.
Tried grouping the line and rotating.
Tried reverse comand.
Tried joining a line to it to trick it into fliping.
View 1 Replies
View Related
Jan 8, 2013
I made a custom linetype to represent a pipeline. The line is abbreviated by 5 letters. My problem is when I reach and curve in the pipe (an elbow), the text string does not follow the curve. It remains straight for the remainder of the text. Is there a way (autocad 2013) to have the text follow the path of a curve?
edit: I saw one similar topic from 2008 in this thread: [URL] and the best response there is the one posted by eldon where you break the code down to each letter. Still, the picture in eldon's post makes the text a bit jagged. Have any changes been made to AutoCAD since this post that make this easier?
View 0 Replies
View Related
Feb 18, 2011
I made a custom line type called EX (for existing pipes) which looks a little bit like this: - - - EX - - - EX - - - EX - - -
Line works great when I draw from left to right. However, when I draw a line from RIGHT to LEFT, the text displays upside down a little bit like this: - - - X3 - - - X3 - - - X3 - - - ("3" representing the mirror image of "E")
Same applies when drawing from bottom to top, or top to bottom. I totally understand the behavior here, and TBH I think it's OK it behaves that way.
Let's say I'm drawing existing water pipes going in all directions with a polyline. Is there a way to make the text display upward no matter what direction the pline is going?
View 9 Replies
View Related
Dec 27, 2012
In "test" mode, this block works well except for the point of the arrow. If you stretch the line under the title, then move the arrow point to somewhere else, then flip it, the arrow point and its associated grip needs to stay put.
It actually does, the first time. BUT then if you move the arrow point again and flip it again, it does not.
Then, when I inserted it into another drawing, either with "insert" or via SSM, the flip doesn't stick to the point even the first time.
So I guess my question is how to flip it but keep the point where it happens to be when the flip occurs. Like a multileader, because what I am actually trying to create here is a multileader that has an annotative block with attribute fields, to be used with SSM.
View 9 Replies
View Related
Jul 1, 2013
I am trying to create a linetype with a 3d shape included to represent road markings, i.e. central lines and edges etc.
For this I need a .shx file and I don't know how to create this as I am not allowed to select 3d objects when using the MKSHAPE command.
How can I best create a linetype with 3d objects?
View 9 Replies
View Related
Feb 20, 2013
we use a custom treeline for all our drawings and as of late we can not publish this line type. The tree line will plot fine if you plot the individual pages but when you try to publish and plot all the pages as a group, it plots the tree line as a dotted line. I checked the plot styles and it's set to use object linetype. Like I said though it only seems to have this problem when publishing the drawing
View 8 Replies
View Related
Jun 18, 2013
2013 has a linetype called "proposed tile" and another one called "existing tile." 2012 doesn't have either. Is there any way I can could get those two files so I could load those two linetypes into 2012?
View 3 Replies
View Related
Jul 19, 2013
I'm drawing a gas line (the one that says gas throughout the length of the line) and i can't seem to scale the text 'gas' properly, it seems that it is all squashing up and i cant make out what it says. I've tried ltscale, psltscale and the actual linetype scale of the line to no avail. I'm sure this is a simple problem, i just cant work it out.
View 2 Replies
View Related
