CorelDRAW X6 :: How To Turn Off Text Nodes
Mar 31, 2013I want to turn off the text nodes highlighted in yellow below.
I know what they are for but I do not need them
I am running CorelDraw X6.
ADVERTISEMENT
CorelDRAW X5 :: Turn Off Antialiasing Of Text?
Aug 13, 2013I've set my page size units to pixels, and I work in Pixels view. I have an imported bitmap of a UI I want to modify a few elements on, including text. But looking at the generated text in Preview it's too perfect (perfectly smooth curved edges even at high zoom, and in Pixels view while I can see the pixels, because it's antialiasing text, it looks indistinct compared with the text in the same font in the underlying bitmap image.
How do I turn off antialiasing?
CorelDRAW X3 :: Reduce Nodes Feature
Sep 6, 2009I use this feature often, but I'm not sure I fully understand it, because I don't know what the number setting (1-100) refers to, and I can't find an explanation of it.
Usually I'll select all the nodes in an object and move the slider to the right until I can get as many nodes to disappear as it will let me. (I don't worry so much about distorting the object because I like to do the final shaping manually using as few nodes as possible...) and I find that at a certain point on the scale it won't reduce further, so at that point I remove the remaining unwanted nodes by hand.
My question is, does the 1-100 scale refer to the percentage of nodes that are removed, and what's the reason it won't go beyond a certain percentage?
Sometimes when I power trace a bitmap there are so many nodes that i spend too much time getting rid of them all...It would be nice if I could get the "reduce nodes" feature to remove more.
CorelDRAW X6 :: Equal Curve Nodes
Sep 6, 2013How to equalize the nodes distance between the curve to apply the brush after making them break apart since here as per the curve size and direction nodes are distributed unequally. how to make them equally aligned.
View 1 Replies View RelatedCorelDRAW Graphics Suite X5 :: How To Set Nodes Color
Mar 27, 2011Color nodes are blue by defaut. When I draw something with blue, I would like having red nodes, or another color. I guess there is a set-up for that, but I realy don't find it.
How do we change nodes color ?
CorelDRAW X6 :: Align Nodes / Color Docker
Sep 21, 2012I've been using CorelDRAW X6 for a bit now (upgraded from X5), and I've noticed a few caveats so far.
1. Align nodes
When trying to align nodes, there seems to be some interesting behavior for alignment. When shift + clicking directly on the nodes, and then selecting Align nodes and performing an align operation (such as Horizontal), the nodes will all align to the last one selected.
However, if you perform the same operation, and marquee select each node individually, then it will always align to the same node. It doesn't seem to matter on which order you do it in.
Steps to reproduce on my end:- Open a new CorelDRAW X6 document- Draw a new object using the Freehand tool with multiple node points- Edit the shape using the Shape tool- Select multiple nodes by holding Shift+dragging around the nodes- Align nodes, see which node it aligns to- Undo Align nodes, redo the same selection but different order- Align nodes, should align back to the same node regardless of the order
Is this to be expected? In CorelDRAW X5 it seems to go to the last node selected, regardless of marquee selection or click selection, unless this behavior was changed for some particular reason. Would just like to know if it's just me doing something wrong here.
2. Color docker
For the Color docker, there seems to be an issue that is mostly cosmetic, but it is noticeable. When the Color docker is open and docked, switching from a palette to color viewers resizes the palette on reselect.
Steps to reproduce on my end:- Open CorelDRAW X6, start a new document, enable the Color docker and dock it- Switch to a Palette (such as Pantone)- Restart CorelDRAW X6 to ensure that it is properly sized, and start a new document- In the Color docker, select another tab, such as the Show color viewers- Select back the Palette. All of the boxes should be oversized and the whole docker should now be larger than normal- Restart CorelDRAW X6 and it will return to normal until another tab is selected again.
One last thing about the Color docker. Is there any reason in particular that the Eyedropper Tool from the left hand menu is discrete? I realize that an Eyedropper tool has been added to the Color docker (threw me off initially), and that only seems to change the color within the docker, but it would be nice to have the same options from before with the main Eyedropper tool (1, 2x2, 5x5, etc) that was available before.
Note: I am using CorelDRAW Graphics Suite 6.1 (CorelDRAW version 16.1.0.843) 64-bit.
CorelDRAW Graphics Suite X5 :: Positioning Nodes - X 50 / Y 100
Mar 13, 2012Is there any way i can tell a node that ive just added to go to an exact position such as X,50 Y,100 ???
i want to be able to tell the node to go to that position so it can make it easier for me to join lines etc.
CorelDRAW X5 :: Selecting Each Set Of Separate Nodes And Joining Them
Sep 7, 2011I am considering upgrading to X5 because I have been told there is a new tool to join nodes into a solid fill able object. I have many drawings that have been sent to me in .dxf format where in all nodes are broken. I use X4 currently and can individually join nodes in order to get an object "joined" and will fill. In order to do this it often takes many hours of selecting each set of seperate nodes and joining them . When all objects will fill then then I save the .dxf in native.cdr format.
View 2 Replies View RelatedCorelDRAW Graphics Suite X5 :: How To Edit Nodes In Envelope
Feb 12, 2013I am unable to select nodes and edit or delete them when using an envelope. I double-click or click and drag, and nothing happens. What do I need to do?
View 5 Replies View RelatedCorelDRAW Graphics Suite X5 :: Resize From Center Using Nodes
Oct 4, 2012I'm trying to find a way to do this:
Make an object (eg an hexagon), and resize it from it's center radially, by dragging a node (and not those black squares). What I got so far, is, using the pick tool, clicking on it to go to rotation mode, hold shift and ctrl, clicking on a node (eg, from a point or the middle of a side), and dragging it.
It works IF i change it's angle, but strangely, if I keep the same angle (just resizing it), nothing happens, neither it gets resized, neither i can clone it (with right mouse click). It only keeps a blue shadow of what would be the object, without doing nothing.
What I want to do with this is, for example, create a square and an hexagon inside it, allign one of it nodes with a node of the square, and resize the hexagon by draggin another node of it until it touch (using snap to objects) another side/node of the square. As I said, it can be done if I resize by the rotation, but only if I change the angle, wich is strange for me.
Am I missing something? It's really weird that I can almost do this without problems, but then nothing happens at all. I wish I could show this visually, would be way better to explain the problem.
CorelDRAW X5 :: Outlining JPEG Image Instead Of Changing Nodes
Apr 12, 2011If there is an easier way to outline a JPEG image instead of changing the nodes. I am looking at a lot of pictures to do this with and can not possibly change the nodes with all of them.
View 6 Replies View RelatedCorelDRAW Graphics Suite X5 :: Reducing / Smoothing Nodes?
Oct 18, 2011Trying to recreate logo. Traced text. The text is too rough. I've selected it, click the shape tool, and the Smoothing bar does not work. It stays at "0" and does not effect the selected curve.
I've tried just drawing a shape with jagged edges and the Smoothing bar still does not work. Am I missing a step to make the Smoothing bar apply?
CorelDRAW Graphics Suite 12 :: Connecting Two Nodes Of Different Objects
Oct 23, 2012ddddd.JPG
I'm working in Corel Draw 12 and I have a problem to connect two nodes of different lines which aren't the nodes at the beginning or end of the lines. That problem I've solved, (by selecting both lines, then using function combine, selecting for e.g. starting node of first and ending node of second line and joining them) but I really have hard time making this out. The function join isn't apparently working for nodes in the middle of the lines.
CorelDRAW Graphics Suite X5 :: Nodes Vanish While Editing In Wireframe
Oct 16, 2013So I will jump right to the issue. I like to make my edits occasionally in wireframe, and as I began to manipulate or move nodes around, the minute I finish editing the first node or a group of nodes, all of the nodes vanish. The only thing that is present in wireframe after they disappear is the object (or line that I am editing) no nodes.
Now, I have learned that if I zoom in or out, they appear again, I would have to continuously do this in order to make edits in wireframe. I do not have this problem in Enhanced View.
Windows 8 / ATI Radeon HD 5700 Series / AMD Phenom II X4 965
My graphic card is up to date; however, I dont believe this is a graphic issue due to the fact that I can edit in Enhanced view without issues.
CorelDRAW Graphics Suite X3 :: Making Nodes On A Default Curve
Oct 3, 2012This has been a feature in CorelDraw for as long as I can remember so I'm hoping that buried in options or customize it can be changed.
When you draw a curved line, the nodes default to Symmetrical rather than Smooth. Symmetrical nodes adjust both sides of the curve when you move the node selection handles which I rarely use. Smooth allows you to adjust once side of the node without effecting the other but still maintaining an in line alignment.
if you can make nodes on a curve default to Smooth rather than Symmetrical?
AutoCAD Civil 3D :: Text Linetype Flips At Nodes
May 23, 2013I am using AutoCAD Civil 3D 2013 and just installed HotFix 3 (so I should be all up to speed). I have created a water linetype (---W---) and telephone linetype (---T---). The problem I am having is the 'W' and 'T' seem to flip at some of the nodes based on if the Polyline is going up or down (from left to right). When it is going up it displays right side up...going down it displays upside down. They are one single polyline with nodes.
I have tried REVERSE, PEDIT then Reverse, my linetype definition is set to U=0.0, but nothing has worked. I have redrawn other polylines and they all have the same issue.
Attached is a PDF of the polylines.
CorelDRAW Graphics Suite X5 :: Automatic Join Two Open Nodes On Same Position
Dec 16, 2012I need join open nodes in complex objects. (Import >mechanical design DXF file)
Function close curves work terribly .
I would have to manually select two open nodes on this same position and click "Join two nodes".I have 8000 nodes to join.
CorelDRAW Graphics Suite X6 :: Make Nodes Snaps Horizontally Or Vertically?
Jan 14, 2013How can you use the reflecting nodes horizontally or vertically nothing is happening when I click the nodes how do you make the nodes snaps horizontally or vertically so that your drawing look symetrical.
View 14 Replies View RelatedCorelDRAW Graphics Suite X5 :: Auto Join Close Curve Nodes?
Jul 28, 2011Is there an automated way to have all the nodes in an (open) curve that are close to eachother to either join or connect with a line ?
"Auto close" dont offer settings and doesnt seem to do this
CorelDRAW Graphics Suite X6 :: Polyline Tool Double Nodes In One Click
Dec 5, 2012I would like to know if some users have the same problem : when I vectorize manually a bitmap with the polyline tool of CorelDraw X6, sometimes I have two nodes very close (I don't understand why because I do one click with my mouse...). I change my mouse without improvement.Do you know a macro to clean my polylines and to transform the "double" nodes in a single node (adjusting the gap distance) ? The reduce nodes feature in CorelDraw is not nice to do that.
View 1 Replies View RelatedAutoCAD Architecture :: Turn Off Ghost Text That Appears When Select Text?
Aug 14, 2007Any way to turn off the ghost text that appears when you select text that is annotative, not get rid of it just not show all of the other scales for clarity.
View 6 Replies View RelatedCorelDRAW X6 :: Turn Off Connector Line?
May 31, 2013CorelDRAW X6: How to turn off 'Wrap Connector Line' by default?
View 11 Replies View RelatedCorelDRAW X6 :: How To Turn Off PDF Transparency Grid
May 18, 2012I just tried the pdf export of a multipage document. When I open it in Reader or Acrobat I see a grid where the page is not covered (transparency grid?). It has nothing to do with the Reader feature - the grid is in the pdf (I can see it with Pitstop in wireframe mode). Can't find where to turn it off.
View 16 Replies View RelatedCorelDRAW X5 :: Embed Color Profiles - How To Turn It Off
Jun 14, 2013I work 99% in RGB, how can I turn off the save color profile.
Under default color management:
Color Profiles: RGB= adobe RGB
cmyk use less than 1%
Primary color mode = RGB
Color Management polices:
RGB = assign default color profile
CYMK = convert to default color profile
grayscale = assign default color profile
import & paste:
RGB = assign default color profile
CYMK = convert to default color profile
grayscale = assign default color profile
Almost every time it wants to default to cymk , which i don't want as I use RGB
Illustrator :: How To Turn A Text Into 3D
Nov 21, 2013How can I turn a text into 3D?
View 7 Replies View RelatedCorelDRAW X6 :: Some Series Of Fonts Turn Italic By Default
Feb 12, 2013I am using Corel X6 on Windows 8 (64bit),
I am facing some problem with few font series. Like the series of fonts called "Heavenetica" has turned italic.
Nothing happens even if I click Italic option again, I tried un-installing and re-installing the fonts, but still the same. The same fonts work and look fine in other software.
I recently upgraded to windows 8, this problem was not there in corel X6 in windows 7.
CorelDRAW Graphics Suite X5 :: How To Turn Drop Shadow Off
Feb 16, 2012I often have the need to remove the drop shadow effect. Currently what I do is to "Break Drop Shadow Group Apart" then delete it from object manager. However with other effects such as Transparency, I can simply set the Effect to None. Can this be done with Drop Shadow?
View 4 Replies View RelatedCorelDRAW Graphics Suite X5 :: Turn Off Print Preview
Aug 13, 2011I have a rather large job, a book with 370 pages. when we want to reprint w/o any changes i would like to turn off the print preview to eliminate the delay.
How to bypass the print preview?
CorelDRAW Graphics Suite X4 :: Turn Off Outline Resizing?
Jul 9, 2013When I create something with an outline, the outline will increase or decrease in thickness as I resize the image. So if I have something at say 10" X 10" at 4pt outline, when I resize it to 2" X 2" the outline is like 5X thicker and messes everything up.
Is there a way to combine or something with a vector so the outline auto changes or never changes thickness when resizing the graphic?
CorelDRAW X6 :: Turn Off Auto Insert Into PowerClip Feature?
Apr 5, 2013Is there a way to turn off the auto-insert into Power clip feature (nuisance)?
I know I can hold down the "F" key to ignore, but seriously, this is a pain in the neck. Yes, I use Power clips extensively, but I need to control them instead of them controlling me.
CorelDRAW X5 :: Print Grid Layer Is Turned On And Can't Turn Off
Dec 21, 2010i have a problem and it's driving me nuts. I have some corel files with print grid layer button turned on and it's impossible to turn it off.
This have a secondary effect and it's corel hangs up when i try to print the file, start to make the "previous checkings" and never ends.