Is there any way i can tell a node that ive just added to go to an exact position such as X,50 Y,100 ???
i want to be able to tell the node to go to that position so it can make it easier for me to join lines etc.
Can we set shortcuts for different positions like alt +f8 for moving the object right relative to its position, alt+f9 for moving the object left relative to its position?
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
Color nodes are blue by defaut. When I draw something with blue, I would like having red nodes, or another color. I guess there is a set-up for that, but I realy don't find it.
How do we change nodes color ?
I am unable to select nodes and edit or delete them when using an envelope. I double-click or click and drag, and nothing happens. What do I need to do?
View 5 Replies View RelatedI'm trying to find a way to do this:
Make an object (eg an hexagon), and resize it from it's center radially, by dragging a node (and not those black squares). What I got so far, is, using the pick tool, clicking on it to go to rotation mode, hold shift and ctrl, clicking on a node (eg, from a point or the middle of a side), and dragging it.
It works IF i change it's angle, but strangely, if I keep the same angle (just resizing it), nothing happens, neither it gets resized, neither i can clone it (with right mouse click). It only keeps a blue shadow of what would be the object, without doing nothing.
What I want to do with this is, for example, create a square and an hexagon inside it, allign one of it nodes with a node of the square, and resize the hexagon by draggin another node of it until it touch (using snap to objects) another side/node of the square. As I said, it can be done if I resize by the rotation, but only if I change the angle, wich is strange for me.
Am I missing something? It's really weird that I can almost do this without problems, but then nothing happens at all. I wish I could show this visually, would be way better to explain the problem.
Trying to recreate logo. Traced text. The text is too rough. I've selected it, click the shape tool, and the Smoothing bar does not work. It stays at "0" and does not effect the selected curve.
I've tried just drawing a shape with jagged edges and the Smoothing bar still does not work. Am I missing a step to make the Smoothing bar apply?
ddddd.JPG
I'm working in Corel Draw 12 and I have a problem to connect two nodes of different lines which aren't the nodes at the beginning or end of the lines. That problem I've solved, (by selecting both lines, then using function combine, selecting for e.g. starting node of first and ending node of second line and joining them) but I really have hard time making this out. The function join isn't apparently working for nodes in the middle of the lines.
So I will jump right to the issue. I like to make my edits occasionally in wireframe, and as I began to manipulate or move nodes around, the minute I finish editing the first node or a group of nodes, all of the nodes vanish. The only thing that is present in wireframe after they disappear is the object (or line that I am editing) no nodes.
Now, I have learned that if I zoom in or out, they appear again, I would have to continuously do this in order to make edits in wireframe. I do not have this problem in Enhanced View.
Windows 8 / ATI Radeon HD 5700 Series / AMD Phenom II X4 965
My graphic card is up to date; however, I dont believe this is a graphic issue due to the fact that I can edit in Enhanced view without issues.
This has been a feature in CorelDraw for as long as I can remember so I'm hoping that buried in options or customize it can be changed.
When you draw a curved line, the nodes default to Symmetrical rather than Smooth. Symmetrical nodes adjust both sides of the curve when you move the node selection handles which I rarely use. Smooth allows you to adjust once side of the node without effecting the other but still maintaining an in line alignment.
if you can make nodes on a curve default to Smooth rather than Symmetrical?
I need join open nodes in complex objects. (Import >mechanical design DXF file)
Function close curves work terribly .
I would have to manually select two open nodes on this same position and click "Join two nodes".I have 8000 nodes to join.
How can you use the reflecting nodes horizontally or vertically nothing is happening when I click the nodes how do you make the nodes snaps horizontally or vertically so that your drawing look symetrical.
View 14 Replies View RelatedIs there an automated way to have all the nodes in an (open) curve that are close to eachother to either join or connect with a line ?
"Auto close" dont offer settings and doesnt seem to do this
I would like to know if some users have the same problem : when I vectorize manually a bitmap with the polyline tool of CorelDraw X6, sometimes I have two nodes very close (I don't understand why because I do one click with my mouse...). I change my mouse without improvement.Do you know a macro to clean my polylines and to transform the "double" nodes in a single node (adjusting the gap distance) ? The reduce nodes feature in CorelDraw is not nice to do that.
View 1 Replies View Relatedwhy (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies View RelatedOften whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies View Relatedi´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
Entire Corel suite freezes on start up - I cannot do anything. Reinstalling also does not work - suddenly buttons on the installer dissapeared - there is no text on them and when I click them nothing happens.
A week ago I have installed service pack 3 and everything worked fine. It has all gone wrong again. And installation of the latest patches does not work anymore.
I am running Windows 7 64-bit and I've got a feeling that is must have something to do with system updates.
I often create graphics in CorelDRAW export it and inserting it into my MS Word documents and finally convert my documents to pdf. When it is vector graphics, exporting as EPS works fine: The increase in file size is small and lines are displayed perfect independant of how much you zoom in the final pdf document. When I handle bitmaps, I usually export as JPG (or PNG), which works well too. My problem arise when I have a mixed vector and bitmap image. I have imported a bitmap into CorelDRAW and created some lines on top of it. I want to export it as a whole. If I export as EPS, the final result is fine, but filesize has increased considerable. If I choose to export as jpg, the filesize is fine, but the lines are getting slightly blurry. Is there a way to get the best of both Worlds - resonable filesize and perfect lines? Maybe settings in some dialog??
View 7 Replies View RelatedHow on earth do you export bitmaps cropped to the size of the canvas? This seems like the simplest functionality ever but i can't get it to work. For example, I am designing an advert for use online. It needs to be 600px wide x 150px high. I may want to use a background image or a photo that when placed goes beyond the edge of the canvas. Logic dictates i would only want to export the canvas with a web image (otherwise why would i have set an exact number of pixels.) However, Corel insists on exporting everything on the canvas and desktop. Surely it should allow us to choose the bounding area of the exported bitmap.
Just to clarify what I mean, i've included a screen shot showing and example original graphic and the export result. I'm sure there must be an easy way to do this. If it's one like this i can crop it easily, but sometimes a print customer will ask me to send them, for example, a 32pp booklet we have designed for them with each page as a JPG and to crop each one manually is a right pain.
X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
Running Win 7 64bit 8GB Ram
I have some Ai files that I need to open in X6 but they use linked images which I have, but when opening in CorelDraw all I get is the basic Ai stuff but not the linked images, is there an easy way to open the Ai file and see it as it was intended?
As a sub note I can't go back to the supplier of the Ai file to make any changes.
I just used the help file for the first time in ages and noticed all the links to the graphics are broken hence no diagrams etc. I tried to search out where they are usually stored and it gives some weird Address under properties. It's a vba so suppose it's a database? How do I restore the links without having to do a re-install?
As to the pen: How do you stop the annoying over-the-top predictive curve that happens past the node in the next section after a long drag to form the first curve. i.e. you simply want to draw a straight line after dragging out a curved section previously and you get this unmanageable curve to deal with ?
02012013010.jpg
Blank Blocks behind text and graphics
After a "format c:" i´m trying to reinstall my corel x5. But after starting the install-progress i only can see this:
What does it mean? I can´t imagine where this comes from?!? How to handle this fault?
I am building a new desktop and am thinking about using dual graphics cards for my work in Corel X5. Ive seen nothing in technical specs or min requirements that even alludes to the program being able to take advantage of an SLI configuration (evga gtx 465 superclocked with 1gb ddr5).
View 5 Replies View RelatedClient supplies me with word document, I make a PDF from it and then from Acrobat create an ESP file, this is done as an eps file is much less likely to cause probs then importing a PDF, I then print from the Coreldraw file with the EPS pages no problem. The problem then arises when I have to then create a PDF file from COreldraw for the client - any EPS files in the document do not appear in the PDF - so there lies the problem.I cannot alway directly import a PDF file (often screws up) even if I save fonts as outlines. Saving as EPS overcomes most/all issues.
View 3 Replies View RelatedI have a client that I laser engrave parts with a variety of graphics, about 35 different designs that fit on 10 different parts and all the designs are different sizes on the parts. I use a fixture that holds 40 parts, two rows of 20, for each type of part. I have a master file for each part that contains a page with each graphic laid out as in the fixture so that I can simply go to the page and select the graphic in the right position for the fixture and paste it into a "lasering" file. The lasering file is just as many pages as I need to run the order and is much smaller than the master file.
That works fine now and is actually pretty quick and easy to setup, but I just found out that they will be adding about 35-40 designs a month. That will make the master file huge and very cumbersome to manage, not to mention the order sheet (spreadsheet) will get huge in no time at all. I can envision it becoming a nightmare to manage and mistakes will be frequent due to the sheer size of the files.
What I would like to do is have a spreadsheet with the graphic and a quantity and merge that into the lasering file instead of doing it manually. I am very familiar with merging data but I don't know if it's possible to merge a graphic from a database or somehow import the graphic into corel.
When I checked my computer for any any unused programs I got see this coreldraw (r) graphics suite x5 installed. When I got to uninstall it showed and error message that some sort of setup.xml is missing. When I checked this programs folder I got to see that there are two corel folders [Corel and Corel (2) ] in my C: drive. After checking all the file locations of different corel applications I deleted the Corel (2) foder. After that also corel was not being uninstalled. I don't want to re-format my computer only for this
View 1 Replies View RelatedWhen I import items, I get a "tool tip" near the mouse stating that I can press enter to center on the page. Or I can press the Space Bar to use the original position. I have a lot of templates set up that I use to go off of, and like to use the space bar for a different quick key.
Is it possible to switch the import quick buttons around somewhere? for example: to have the enter button place the file I'm importing to the original position?