If I draw lines between nodes and then list the lines it gives me slope distances. how can I set it to draw 2D lines but still have 3D nodes? I want my points to display the correct elevation but when I draw lines connecting them I want the line to be 2D so when I list them I get the correct bearing and a horizontal distance.
View 5 RepliesI import a text file. I look at the coordinate list in the toolspace under the survey tab and the coordinates listed are correct. but the nodes in the drawing are 4 feet off.
View 5 Replies View RelatedI recently had to re-format the cpu and re-install acad. I'm working with XP Pro and acad 2006 and am now having the "fun" of trying to get acad back to the settings I am used to.
Everytime I work in a drawing, whether it be new or old, all these little x's show up on my screen. It looks like 3 nodes overlapping each other. if I zoom in or out and regen they move. a zoom extents does not include them in the drawing area. pdmode has no effect on them nor does blipmode. I can delete everything in the drawing, do a regenall and they are still there. the below link is a screen shot...
[URL] ...
They are really anoying to look at and its been so long since I have had to configure acad I can not figure out what is doing this and how to stop it.
UPDATE- maybe just a coincidence but it seems they are being created when i copy something, maybe a temporary basepoint marker or something, but then they never disappear.
im using c3d 2012. whenever i'm drawing lines between nodes and i have my osnap set to node and it picks nodes but i have to be right on top of the node when i pick it so i'm having to zoom in and out a lot. in ldd i was able to hover anywhere over the point text and it still picked the node.
View 4 Replies View RelatedI am wanting to draw lines from gun setup to the back sight, and then from the gun to all the radial shots that were taken from that setup. I would like to do this as automatically as possible. (i.e. a bunch of radial lines from the gun to each individual shot from that setup).
Our raw files are in TDS format. I could do it manually by using the transparent command 'PN, but I would have to draw a line from the setup to the shots individually.
Otherwise, I could write a lisp that asks me for the setup pt number, and I could give it a range ot pt #'s and have it draw lines from the gun to each of the pts in the range. (that is, if 'PN works in lisp).
When I start to draw my polylines to cogo points I have inserted in my drawing it keeps wanting to hang up when I hover over the point. I have set up my point styles to bring in our points with all the attribute information so I am thinking it keeps trying to read all that info as soon as my mouse hits it..
I saw a post about rollovertips but that did not change anything. Any ides what might be causing this? Im using Civil3D 2011.
Why do our feature lines all come in as the color white when xreffed into a drawing? Feature lines show up just fine in our topo drawing, so then we xref it into our design drawing and they all show as if the color is white when is is not in the layer properties. All other items (symbols, points, and lines) come in as the color they were drawn in the topo drawing.
View 3 Replies View RelatedI have trying to run lift station simulations and my calculation nodes are always flooding. They don't flood in real life so what could be a problem?
View 6 Replies View RelatedI am using AutoCAD Civil 3D 2013 and just installed HotFix 3 (so I should be all up to speed). I have created a water linetype (---W---) and telephone linetype (---T---). The problem I am having is the 'W' and 'T' seem to flip at some of the nodes based on if the Polyline is going up or down (from left to right). When it is going up it displays right side up...going down it displays upside down. They are one single polyline with nodes.
I have tried REVERSE, PEDIT then Reverse, my linetype definition is set to U=0.0, but nothing has worked. I have redrawn other polylines and they all have the same issue.
Attached is a PDF of the polylines.
difference (and the utility) for displaying a flooded (blue) and a surcharged (red) node? I assume that the surcharged (red) node is when water is bubbling out of the grate, what is the flooded node, and when would I want to check on the flooded nodes?
Civil 3D 2013 SP1, Win 7-64 bit
12GB RAM
I imported survey data and had auto lines drawn. then I rotated my points/nodes. -- how do i get my linework to update?
View 4 Replies View RelatedMy surveyor gave me a topo survey done in no particular coordinate system. He set up his total station on a PK nail and gave it a coordiante of (5000, 5000, 100). I used this survey to generate a surface.
I also have a site survey of the same site, done in state plane coordinate system. the two surveys have mulitple common points; pk nails, iron pins ect.
What i need to do is move the points for the topo survey over to the survey that is in state plane. A simple move command will not do this.
How do i go about moving these points to thier correct location without having to manually edit the .txt file?
I have a master plan development that I am trying to model different wastewater flows scenerios for I am basically following this paper from AU 2011 [URL] but have a couple of issues I am trying to work around.
Basically I want to take a spreadsheet of flows determined for specific nodes and upload it into SSA quickly from the paper
I can see that you can write a shp file of the network and then add different flow scenerios to the .dbf file and them use the GIS import function of SSA to get the flows assigned in one hit.
The issue I have however is that my network is a prelimary design in Civil3d as pipes and structures and if I create a .sdf of the network and then.shps from that data I do not get the structure sump elevations, this is not something that created in the shp file export process,
To work around this I through maybe I could export the network from Cicil3d to SAA which gies me all the strucutres with the correct sump levels and then also create a .shp and .dbf file and add the flows and them do a GIS import of just the structures and merge them with the exisiting network as the structure names as exactly the same and therefore the gis import should find the correct structures.
However SSA does not and adds a second lot of nodes with the same structure name but with Junction in the front.
Civil 3D 2013.
Problem with command from Home tab - Draw panel - Curves drop-down - Create Curves Between Two Lines OR Create Curve on Two Lines.
If you select the Degree option, it draws a zero length curve when you type in a valid number for degree of curve. I have tried entering it in decimal format and as ##d##'. NOTHING WORKS!
Recently upgraded to Civil 3D 2013 and drawings opened up fine. Now today any drawing that opens shows the plan view as last saved but then after loading takes the drawing and shifts it into a 3d view similar to a crossection. Is there a setting somewhere that has been changed? I noticed after a windows 7 update was preformed.
View 7 Replies View RelatedI am using an older version of AutoCAD 2010. I cannot find where the "double line" feature is under the drop down menu under "draw".
View 1 Replies View RelatedHow can I fix my LT so that I can draw fluid lines? At the moment the cursor jumps in increments across the screen as I move my cursor.
I can draw circles and rectangles fine (smooth, no lag) but straight lines are a nightmare. This also follows true with the "first line" of an elipse which is very jumpy.
Note: Brand new 3 day old HP 6550b ProBook, running windows 7.
I have tried unsuccessfully to draw lines using bearings as a surveyor draws them. I have seen a number of posts here and on the web, but they relate to northern and easting’s, but as you can see on the attached PDF from a surveyor they have used only bearings. I’m not a surveyor, my background is mechanical so this is all new to me. what units and settings I may need to change in order to draw using these bearings. I’m using Autocad 2012, and the attached PDF relates to some blocks of land in Australia (just in case that makes a difference in the settings)
View 7 Replies View RelatedI use auto cad for work and the other day I was drawing and it accidental got switched to 3d view and I noticed that all of my lines are in 3d it only happens in the company template because if i make a new drawing the lines are flat. i have tried flatten but when i start drawing again the same thing happens.
View 1 Replies View RelatedI am having trouble with drawing lines in decimal. My length is Decimal, insertion scale is feet. So say I wanted to enter 21 inches in feet. I just click to draw my line, then use 21/12 as my input for length. That works fine. But when I have a line that I want drawn at 21.5" (I enter 21.5/12), it won't work, saying point or option keyword required.
View 4 Replies View RelatedI have two drawings: one with lines, and one which includes maps (raster image) and point cloud of latitudes of the same area (elevation in meters). I'm trying to copy these lines from the other drawing into the map-drawing, but when I'm trying drag and drop, the mouse doesn't even go to the other drawing. I also made a block of the lines and tried to insert it, but it doesn't work either.
View 5 Replies View RelatedI'm trying to draw a line that is parallel to the one I've already drawn. It works fine (Osnap on) when I draw a whole new line and then draw a parallel line. But when I try to add a parallel extension to an old line, it doesn't work. The old line is located in another layer, but I tried to copy it to the same layer and it still doesn't work.
View 8 Replies View RelatedCant figure this out - I create a sketch in a drawing, but I cant see the lines as I'm drawing them. The lines are on a "solid" layer set to red as defined in my standard. The background of my drawings is black. When the line command is done, the line appears and it's red. Problem is I cant see it as I'm sketching. Is there any way to modify this? Can I have the line appear red (or white) as I'm sketching?
Product Design Suite Ultimate 2014
Vault Professional 2014
Windows 7 Pro SP1
HP-Z400: 2.67 GHz 12 Gb Ram
Nvidia Quadro FX1800 driver 276.42
How to create some construction lines on the Inventor drawing? I have been used construction lines on the AutoCAD drawing; it is very convenient tools to use in the daily basic.
View 7 Replies View RelatedWhenever I want to draw a line within a shape I have to start the line from the corner. Why am I not free to start where I want?
View 9 Replies View RelatedI have a drawing of tower in 3d, i want to put all the drawing in 2d only so that i can trim some part of the lines, is it possible to put the 3d in 2d in one level only, i mean one axis.
View 9 Replies View RelatedI was using a 3 MB PDF underlay yesterday and zooming/panning/saving operations were very sluggish.
BTW, when I attach a PDF underlay, AUTOCAD allows me to snap to the lines in the PDF and even measure them. Since it recognizes those lines, is there an easy way to copy the lines from the PDF into the drawing?
I completed a drawing for class, and on the screen it looks great. When i go to print it and preview it after centering, picking scale, etc, the preview shows most of the text to be thick. Its like the line weight is wrong or something.Drawing7-1.dwg
View 9 Replies View RelatedI draw a rectangle, and I want to draw a line coming out from the rectangle. Normally I would use OSNAP to get midpoint and endpoint, but this time I want to draw it from any part of the edges of the rectangle.
How do I get the cursor to "snap" to the lines of the rectangle? Similarly, I would like this function for the MOVE tool as well, I used this method in Sketchup before and really liked it a lot.
How do I achieve this in AutoCAD? I tried Nearest, Perpendicular, but they don't work as well.
edit: just found out my subject line is not related .
I keep trying to draw a line by bearing and distance using the format @50.00'<N80d04'30''E. Everything enters but when I enter the last command of the bearing and hit enter it stays in the red boxed outline and does nothing. Upgraded to 2014 and trying to get things set for drawing property boundaries. Tried setting the units to surveyors mode and such but nothing works.
View 2 Replies View RelatedI need to find lines that overlap one another in a drawing and mark them, not delete them. I am running AutpCAD Map 3D 2012.
View 3 Replies View Related