I'm trying to draw a line that is parallel to the one I've already drawn. It works fine (Osnap on) when I draw a whole new line and then draw a parallel line. But when I try to add a parallel extension to an old line, it doesn't work. The old line is located in another layer, but I tried to copy it to the same layer and it still doesn't work.
View 8 Repliesif I have two lines which run roughly paralel, but sometimes vary in the distance between them, is there a quick method of having CAD draw a line which is central to the two?
Basically, like an offset, but it would need to offset the line at a distance that is central to the two lines, as and where it varies. IE, you couldnt choose 'offset' and then choose 'mid between two points' because the distance between the lines varies at points..
How can I draw in two parallel lines in CS4?
View 3 Replies View RelatedDrawing Parrallel lines from one elipse to another?
I am drawing pipe and beams.
I use a variety of methods. Right now I just SNAP to the elipse, draw the lines at the angles and then hit the other elipse. Sometimes though the lines jump all around the elipse.
The lines of hatch are together like a block,but it is not block,what is this kind of format?And is it possible to convert several parallel lines into 'hatch' ?
View 3 Replies View RelatedI am drawing a diagram to describe a mathematical word problem. Since it is easier to visualize with a drawing, I want to draw it using the given dimensions. But angles used in the diagram are unknown and are not needed for the answer to be calculated, so the only way to draw this freehand is to guess at the angle resulting in the correct distances to be off.
Here is the word problem: There are two ladders, one 40 feet and the other 30 feet, each touching the base of one of two buildings and leaning against the other building. If the ladders cross 10 feet above the ground, how far apart are the buildings?
So for my drawing, being rather simple considering what AutoCAD can do, results in this:
Can AutoCAD calculate the angle needed to place a line of a given length between two parallel lines that are a distance apart less than the length of the line to place between them, having the endpoints of this line touching the parallel lines, fitting exactly?
For the word problem, the distance between the two parallel lines is what needs to be solved and the math is quite invloved, having to find the roots or solution of a quartic equation. (I have the solution figured out to be 26.03287754 feet)
What I am afraid of is that this would require to program an AutoLISP routine to create a new command that one can call from the command line. I see it using the the measure command with relative and absolute co-ordinates. This may be far from a "beginner" question. I can do this quite easily on a peice of paper: having two parallel lines drawn, take a ruler and placing the "0" mark on one line, then adjusting the angle until the desired length just reaches the opposite parallel line. I used to use this trick quite often when drafting with pencil and paper to divide a distance into a required number of even amounts, so this can't be that difficult to do with AutoCAD!
I have a block that has a portion that needs to rotate up to 90 degrees. The problem is that it has parallel lines that create a bowtie when rotating. I've tried everything with constraints to get this block to work, but I just can't keep it from creating a bowtie when rotating.
View 7 Replies View RelatedAny way to build or download a linetype that can display as a thick dashed line surrounded by 2 parallel lines on either side of it?
We use them to denote underground stormwater pipes in our survey models.
Currently I need to manually set each line to a polyline, give it a global width, and then draw a DLINE of the same width from endpoint to endpoint. The down side is that not only is it laborious, I also have to set the Z values to zero, so we lose the elevation feature of the pipe in the model.
Ideally it would need to have enough functionality to alter the spacing of the dashes, and the width of the line.
I want to create some parallel but diagnol lines easily in photoshop or illustrator. A easy to follow tutorial will be fanastic.
View 2 Replies View RelatedIs there a way/plugin that divides some shape in parallel lines?
Something like doing:
slice with slice plane along ex. "X" axis every 20cm
of course my shapes not aligned in any axis. Making working pivot for each shape and then making a hundred slices would be a massacre.
I am having a problem with parallel horizontal lines in my hi-res jpg files. They show up on screen much like an old-fashioned TV screen and in prints as black horizontal lines. I am working from big files (12,800 KB) and decent dimensions 1728 x 2600 at 300dpi, but still these lines persist. What am I doing wrong?
View 3 Replies View RelatedWhen you create shapes that fits together, there appeares a thin line that also shows when you make a jpeg from it. I'm a vector contributor at iStock and making a preview jpg with all those white lines looks really ugly (see attachment).
Here is a simple solution. Copy your shapes on top of each other and the lines are gone. This way your work stays 100% vector. For work that hasn't to be 100% vector, you could make a bitmap copy and place it under your vector image.
The best / easiest way to subdivide a panel of a ceiling into parallel lines (each panel having these lines going in different directions)? See attached sketch.
View 4 Replies View RelatedHow do you draw parallel lines with a specific distance between them? I was gonna use this function for futuristic artwork. Do you have to use the grid for this or is there another way?
PS. is there a plugin maybe?
I set a viewport to a perspective mode. I do this by starting 3DOrbit then right clicking and choosing perspective. Save, close, open and all perspecitve views are set to parallel projection.
View 9 Replies View RelatedLooking for the process to straighten the lines on an equirectangular panorama I have made with a series of images with a 15mm fisheye lens. I would like to create a true parallel with these files if possible.
View 3 Replies View RelatedI draw a set of straight parallel lines and then apply a smooth zigzag.
Here’s what happens:
Of course if I zigzag a single line and then multiply it everything is in order.
But why can’t Illie cope with multiple lines?
I am trying to draw two shapes but need to keep the inside edges perfectly matched, after which I want to fill them with red (I can do that part).
View 5 Replies View RelatedI am using an older version of AutoCAD 2010. I cannot find where the "double line" feature is under the drop down menu under "draw".
View 1 Replies View RelatedHow can I fix my LT so that I can draw fluid lines? At the moment the cursor jumps in increments across the screen as I move my cursor.
I can draw circles and rectangles fine (smooth, no lag) but straight lines are a nightmare. This also follows true with the "first line" of an elipse which is very jumpy.
Note: Brand new 3 day old HP 6550b ProBook, running windows 7.
I have tried unsuccessfully to draw lines using bearings as a surveyor draws them. I have seen a number of posts here and on the web, but they relate to northern and easting’s, but as you can see on the attached PDF from a surveyor they have used only bearings. I’m not a surveyor, my background is mechanical so this is all new to me. what units and settings I may need to change in order to draw using these bearings. I’m using Autocad 2012, and the attached PDF relates to some blocks of land in Australia (just in case that makes a difference in the settings)
View 7 Replies View RelatedI use auto cad for work and the other day I was drawing and it accidental got switched to 3d view and I noticed that all of my lines are in 3d it only happens in the company template because if i make a new drawing the lines are flat. i have tried flatten but when i start drawing again the same thing happens.
View 1 Replies View RelatedI am having trouble with drawing lines in decimal. My length is Decimal, insertion scale is feet. So say I wanted to enter 21 inches in feet. I just click to draw my line, then use 21/12 as my input for length. That works fine. But when I have a line that I want drawn at 21.5" (I enter 21.5/12), it won't work, saying point or option keyword required.
View 4 Replies View RelatedI have two drawings: one with lines, and one which includes maps (raster image) and point cloud of latitudes of the same area (elevation in meters). I'm trying to copy these lines from the other drawing into the map-drawing, but when I'm trying drag and drop, the mouse doesn't even go to the other drawing. I also made a block of the lines and tried to insert it, but it doesn't work either.
View 5 Replies View RelatedCant figure this out - I create a sketch in a drawing, but I cant see the lines as I'm drawing them. The lines are on a "solid" layer set to red as defined in my standard. The background of my drawings is black. When the line command is done, the line appears and it's red. Problem is I cant see it as I'm sketching. Is there any way to modify this? Can I have the line appear red (or white) as I'm sketching?
Product Design Suite Ultimate 2014
Vault Professional 2014
Windows 7 Pro SP1
HP-Z400: 2.67 GHz 12 Gb Ram
Nvidia Quadro FX1800 driver 276.42
How to create some construction lines on the Inventor drawing? I have been used construction lines on the AutoCAD drawing; it is very convenient tools to use in the daily basic.
View 7 Replies View RelatedWhenever I want to draw a line within a shape I have to start the line from the corner. Why am I not free to start where I want?
View 9 Replies View RelatedIf I draw lines between nodes and then list the lines it gives me slope distances. how can I set it to draw 2D lines but still have 3D nodes? I want my points to display the correct elevation but when I draw lines connecting them I want the line to be 2D so when I list them I get the correct bearing and a horizontal distance.
View 5 Replies View RelatedI have a drawing of tower in 3d, i want to put all the drawing in 2d only so that i can trim some part of the lines, is it possible to put the 3d in 2d in one level only, i mean one axis.
View 9 Replies View RelatedI was using a 3 MB PDF underlay yesterday and zooming/panning/saving operations were very sluggish.
BTW, when I attach a PDF underlay, AUTOCAD allows me to snap to the lines in the PDF and even measure them. Since it recognizes those lines, is there an easy way to copy the lines from the PDF into the drawing?
I completed a drawing for class, and on the screen it looks great. When i go to print it and preview it after centering, picking scale, etc, the preview shows most of the text to be thick. Its like the line weight is wrong or something.Drawing7-1.dwg
View 9 Replies View Related