I need a wall fill pattern that displays as a hidden linetype...in other words, like a polyline with a global width of 5" with a hidden linetype. Is this possible with an AEC wall?
This is obviously a commonly used drafting standard for fire-rated walls or other wall types, so I'm sure it has been addressed by Autodesk, I just cant figure out how to get the wall type.
I'm very new to AutoCAD but now I'm using LT 2014.
I'm trying to change my linetype from solid to hidden, and I've checked the properties, changed the linetype on my toolbar above, ensured the scale is set to 1, and zoomed in to make sure the scale is correct. I've unlocked all the layers, and checked all my different spaces to see if maybe there was a glitch that just wasn't showing the change in linetype. Nothing!
The properties for my linetype show me that the line is a dotted (hidden) line, but the line itself doesn't show as hidden.
Im trying to make a linetype that is hidden with text in it. Is that possible? Ive got all my linetypes customized with text, but trying to make them on a hidden linetype is tricking me.
View 5 Replies View RelatedI can make a curved wall, now I need to make a "cylinder" wall or a closed curved wall. If a curved wall can be closed I cannot figure it out.
View 4 Replies View RelatedI'm attempting to create a wall style that has 2 components, a framed wall and a brick veneer. What I would like to do is have this wall react a certain way when I insert a window. Basically, I don't want the window to cut into the brick veneer, only the framing.
I have attached my attempt so far, and I have not figured out how to get the window to only cut the framed portion.
I am having trouble cleaning up different wall types joining at or close to a corner. I tried to over ride the clean up radius....no luck.
View 9 Replies View RelatedI have been adopting a linetype scale system for CENTER & HIDDEN types that works perfect on one drawing but not in another.
Here it is:
Globally,
Measurement:1
MSLTSCALE:1
PSTLSCALE:1
CELTSCALE:1
LTSCALE:1
CENTER lines are scale 0.1 (works fine in all drawings and in both 1:30 and 1:4 viewports)
HIDDEN lines are scale 0.3 (work in one drawing but failed in the second drawing in both 1:30 and 1:4 viewport)
Setting the HIDDEN lines to 10 works with most other drawing.
I want to know first of all why this setting of 0.1 CENTER and 0.3 HIDDEN works on one drawing and not on another one in spite of the general settings set alright.
I can convert a wall to a curtain wall but not a curtain wall to a wall. When converting a wall to a curtain wall I select wall in the design pallette right click apply to wall select the wall and it changes to a curtain wall. When I try converting a curtain wall to a wall I right click on curtain wall select apply properties to wall then go to select the curtain wall but I cannot select the curtain wall as a wall?
I simply want to convert an existing curtain wall to another wall type how is that done/
Linetype code that represents blocks in a retaining wall, lets say for instance Keystone type blocks?
View 1 Replies View RelatedI've made a shape (attached image) and am trying to find a way to use it for a linetype. However, I'd like to have the left and right "blocks" filled (hatch or whatever) so that when used repeatetively in a linetype, the filled and open spaces will alternate. I may change it to be only 2 blocks or 4 - haven't decided yet.
I've made linetypes with simple line shapes, but never one like this.
I have exported the 3 polygons through the Map Drafting ribbon --> Export and then brought it back into CAD. This gave me 3 adjacent filled polygons (3 seperate objects) and I don't know how to show it as one shape entity, much less without the middle fill.
Is there another way I can accomplish this without the use of shapes?
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
I have a problem with plotting 3D drawings. I have certain perameters I have to follow!
1. I have to use our company standard CTB files because our plots include 2D drawings that use color to define line thickness.
2. I have to use viewports, we use "carrier" sheets (paper space) to hold xrefs of all details, plans, etc...
3. I have to use Arial font and filled arrows.
The proceedure I use - I create 3D solids, then rotate them to the view I prefere (typically an isometric view), then I put text with arrows etc.. in. Once the Isometric (3D) is done I xref it into the model space of my "carrier" sheet. I then create a viewport and set it to plot "Legacy Hidden" as this allows me to plot the drawing to the correct line weights and so on using our CTB files.
The problem is that when I use the "Legacy Hidden" setting, all of the text, arrows, polylines and hatch are not filled. I have tried all of the other settings for plotting and they just do not do what I need - Hidden plots as a color image and on the black and white plotter is gray and not black, others give unsatisfactory results as well!
I have found a workaround but that won't cut it with our CAD committee, I am tring to get them to "allow" us to use 3D as a proper way to do isometrics and perspectives. This is my drawback!
One work around uses 2 viewports (one a copy of the other with the plot settings changed and the layers turned off/on then place one directly over the other to properly plot), the second is more reasonable but I have not tried it yet, it would involve creating a 3D drawing, then xrefing it into another drawing file that would contain the viewport and all of the text, polylines and so on).
I realize I am probably using ACA against the way it is meant to be used, but is there a way to get back the linetype and lineweight menus that are on the classic view toolbars but not the ribbon? I just upgraded to 2012 and decided to bite the bullet and just use the ribbon, but it's really just not working out. Unfortunately I only have ACA yet am doing non-architecture work so really need to be able to modify lines without creating a different layer for each type.
View 3 Replies View RelatedI'm currently trialling ACA 2010 in our office. In previous releases we used AEC Polygons as hatch and boundary objects for say concrete footing as an example.
Without the properties toolbar, how would I go about changing the linetype or colour of the aec polygon, I don't want to change the layer or a style based override I just want to assign a new colour to an object as the style base is set to 'byblock'. The properties for changing linetype, scale and colour aren't in the properties palette either.
Is this a bug or is there a correct workflow I must assume from now on?
I'm drawing a gas line (the one that says gas throughout the length of the line) and i can't seem to scale the text 'gas' properly, it seems that it is all squashing up and i cant make out what it says. I've tried ltscale, psltscale and the actual linetype scale of the line to no avail. I'm sure this is a simple problem, i just cant work it out.
View 2 Replies View RelatedI have a feature line as the top of a wall and want to grade up away from it to marry to existing ground.
View 1 Replies View RelatedIn my xref drawing I changed the linetype of a swing to be hidden. After changing it in the xref and saving I go to my plot file and the swing is still continuous. Visretain is set to 1. The swing changes on all other drawing files except one.
View 2 Replies View Relatedit sure is useful to be able to get to the rest of the object properties that are there but hidden from property sets.
May 18, 2007
ADT Window Style Type in a PSD
Filed under: visitmycarfeed, drivemy cars, minicartag, internet — wilhemina947judith @ 5:38 pm
The Window Type for a windows style is not available as an automatic property. So a bit of VBScript is needed. Create a PSD (Property Set Definition) that applies to Windows styles and add the automatic property Handle. Then add the formula below. Notice that [Handle] in the formula must be selected from the “Insert Property Definitions” list. In the code
AecX.AecArchBaseApplication.5.0 refers to ADT 2007. For other versions of ADT change it. ADT 2004 - AecX.AecArchBaseApplication.4
ADT 2005 - AecX.AecArchBaseApplication.4.5
ADT 2006 - AecX.AecArchBaseApplication.4.7
ADT 2007
- AecX.AecArchBaseApplication.5.0
ACA 2008 - AecX.AecArchBaseApplication.5.5
[code]....
I have already wrote the code to get the elevations of ceilng grid objects, diffusers and lights in autocad MEP 2008. Now to get this to work for basic hatch objects that we like to use for gyp ceilings...
I'm running Architecture 2013. When creating an elevation object from a 3D model, the hidden lines are not being removed. I've never seen this before, though I have been using Architecture and ADT for years. I've recently upgreaded from 2009 to 2013, and VOILA!
Hidden lines not removed from elevation and section objects. I've tried various tests, to no avail.....
I have drawings that were made in AutoCAD Architecture 2008 that when opened in AutoCAD Architecture 2012, the 0-width walls in the drawing don't show up anymore. The only solution I found was to change the Base Height in the properties of the wall (which I accessed by choosing the zdiagnostics display setting) to 10' instead of the standard 1/2" that we normally use.
I'm guessing it has to do with the wall styles as they were transferred from out 2008 to our 2012 template.
I used to be able to snap to the end of the linework that form the visual end or intersection of walls while grip dragging a wall of one style to another. For example, using a wallstyle as a countertop, I'd be able to drag it to the corner of a room and use object snap to the intersection. In ACA 2012, the object snap defaults to the justification plane of the wall even if that's not where the intersection snap is desired.
View 6 Replies View RelatedI am using 2012 Architecture and when plotting layouts it is converting curved surfaces into liniar hatched messes, my office just converted to 2012 from 2006.
i am using legacy hidden with monochrome.
I quite often like to use the wall grips to adjust the length of a wall. This works really well accept for the occasional situation were I want to snap to the face of another wall rather than the justification line. I know that I can snap to the face of a wall rather than the justification line because I have some files that it works fine in and other files that it does not work in.
View 2 Replies View RelatedIn Revit there is a tool to convert lines to walls including lines of an xrefed AutoCAD file. Is this feature available in ACA?
View 3 Replies View RelatedI did a drawing in ACA2011 sent it to my remote office where I have ACLT for mac 2013 (trial). Worked on the file,
had to explode the couple of walls I was editing, saved as 2011 or 2010 file.
When I open the file in ACA2011 I can not execute the wall tool. This is the message received:
Command: _AecWallAdd Command not allowed because drawing contains objects from a newer version of this application.
The new objects would be lines.
My boss wants me to make the most outside line of a walltype to be the heaviest pen. If I go to the properties of the wall and changethe boundary it changes the boundary of the item in the wall, each boundary independentfrom the other. Such as a wall made of the following: BRICK, AIR SPACE, SHEATHING,STUD AND GYPSUM BOARD. In this wall theexterior face of the brick and gypsum board need to be heavy.
View 4 Replies View Relatedhave trouble moving doors or windows within a wall?
I am trying to move a door so that the door is flush with a face of wall. The prompts in acad do not match the instructions.
For instance; select door, okay. then from anchor panel select 'reposition within wall', okay a red line appears and prompt to 'select position on the opening'. okay so i click the face or side of door jamb then select a reference point. (guide says select point to measure to) and on and on. Door never moves.
it should be; select door, select reposition in wall, select reference point (interior, exterior, midpoint), select the desired location. Done.
Instead it is select this that and the other , measure from here, select, click.click click.
In AutoCAD Architecture 2012: when we insert standard windows in the wall, we usually get a wall break. After changing window size to small (2’ high), this wall break disappears in the plan, but still have it on isometric or perspective view.
View 1 Replies View RelatedIs it possible to create a wall in AutoCAD Architecture that will change in size along its length. At one end of the concrete wall the wall thickness is 12", at the other end the wall thickness is 24" thick. The wall will grow in size from one length to the other.
View 6 Replies View RelatedI have received some architectural models which were modeled in AutoCAD MEP and only have walls modeled as type Standard. Is there a way to transform Standard walls into cavity walls etc., giving wall makeup as you go - or do I have to re-model in order to get quality 2D cuts?
View 1 Replies View RelatedI'm just trying to put a wall under a stair and it seems like I can not succeed. Already tried with interference, body modifiers and trimming.
View 2 Replies View RelatedWhy would a window not go into a wall?
I have a client who is having this issue - when I open the file it works fine for me.
Is there a system variable or setting that could cause this?