AutoCad 2D :: Make A New Linetype?
Nov 8, 2012
I work with a drawing that for some reason don't have a proper fence line in it. I tried to load another .lin file, but still the fence line looks funny. The line I'm after looks and work ok in alla other files but this one!
I tried to copy paste a fence line from another drawing but what's pasted is just half the linetype...
The line should look like this -- / ---- / ---- / ---- but comes in as -- ---- ---- ----
Why do I loose the slashes?
*FENCEONBOUNDARY, Fence on boundary _____ / _____ / _____ / _____
A,.7,["/",STANDARD,S=.05,R=0.0,X=-0.1,Y=-.05],.1
The result should look like ----- / ----- / ----- / -----
View 4 Replies
ADVERTISEMENT
Dec 5, 2012
I have just made a new linetype but the ends look funny...I can't see why the ends, before and after the slash are different lengths? How to make them more even?
View 9 Replies
View Related
Dec 15, 2011
what im trying to do is make my own linetype for specific jobs, ie a number of different lines named different things. so using the acad.lin file i have altered it and reloaded it but all my text doesnt look big enough or too big, i am using different drawings etc so i could be on a 1:100 or 1:50 etc, i would draw a polyline and it would be 70mm thick, the line obviously changes but the text height doesnt
View 9 Replies
View Related
Nov 10, 2012
In our work we draw many symmetrical outlines. In many cases, chiefly due to space constraint, we draw only half the outline and use a centerline of the symmetry to dimension the part.
Our current method is to use sketches to achieve this. I wonder if there is a way that we can make this linetype available from the styles? Diagram attached below.
View 6 Replies
View Related
Aug 9, 2013
Im trying to make a linetype that is hidden with text in it. Is that possible? Ive got all my linetypes customized with text, but trying to make them on a hidden linetype is tricking me.
View 5 Replies
View Related
Dec 5, 2011
I am now working for an oil company, nd we do arather a lot of work involving lifting plans with chain hoists etc.
My question is, is there any way of make a linetype that automatically draws chain. At the moment, i have to manually draw a link, and copy and paste with basepoint to the reuired length, and then "block" it. however, when we come to alter these drawings, they are a nightmare to alter all the chain sections.
If there was a way of developing a linetype that automatically made these chains, it would speed things up so much.
View 9 Replies
View Related
Feb 1, 2013
I am wondering if it is possible to make a linetype that is essentially two continous lines (Or small dashes lines) overlayed atop one another. The purpose for this is to create a shadow effect (we use this for text on aerial imagery). The bottom line would be a thick white/black line and the top line would be the opposite so it stands out.
View 1 Replies
View Related
Nov 14, 2012
How can I copy a linetype definition from a drawing to the linetype definition file?
View 7 Replies
View Related
Jun 14, 2013
I am new to AutCAD and where I can find or purchase line tpes specific to development (i.e. water, san, storm, edge of payment, top of slope, etc).
I do not have time to learn how to make linetypes as I am still learning the basics of the program.
View 2 Replies
View Related
Apr 2, 2004
How i would create a new linetype in AutoCAD LT 2004. For example creating an electrically traced line that is a dashed line with the letter E in the line.
View 6 Replies
View Related
Jul 15, 2011
i set linetype scale in one of the drawing which is lts value is set to 900..when i select line and open option in order to set linetype scale it show the message..
View 3 Replies
View Related
Apr 25, 2013
I looked through other threads and I still couldnt get it figured out. I am trying to make a linetype like the attached image..
View 7 Replies
View Related
Aug 14, 2013
I am autocad 2010 user. I have drawing files from consultants with custom linetypes. I have deleted the. shx file but need to change line type. How do I select the relevant lines to convert to normal line type?
View 2 Replies
View Related
Mar 5, 2013
I am currently running AutoCAD 2013 LT on a Windows 7 64 bit system. I was recently running this same software on a 32 bit system computer and everything was running properly. After the upgrade, I have noticed a linetype issue that I cannot seem to get a handle on.
We use a "insul" linetype on building sections that should come out looking like an architectural insulation pattern. After upgrading to the new computer, this linetype only reads as dots, nothing else. I have gone to other comnputers in the office that are displaying this linetype properly and have copied their acadlt.lin as well as acadltiso.lin files over to my computer and it has not solved the problem.
View 3 Replies
View Related
Jun 15, 2012
I am using Map 3D 2013
I have several drawings in which I want to use a line type (centrex2) at a specific scale. The scale setting is exactly the same in all the drawings but in some the line type is coming out at different scales, all larger, but not the same or to a set factor. All the entities in question are poly lines (2d).
I have checked in all drawings that:
global scale factor and current object scale in the line type manager are the same (1.0)drawing units are the same (unitless)‘use paper space units for scaling’ is always deselected line type generation is always enabled.
View 1 Replies
View Related
Jun 7, 2012
Currently in process of a quick fix, trying to create a linetype that should place a number in between the lines.
*One, Places 1 in between lines A,5000,-50,["1",CompatecStandard,U=0,Y=-125],-150
That's as far as I've gotten and it pretty much does what I want it too, but right now it is set to 5000mm before it makes a gap with a number. I would like that gap to be dependent on the length of the line... is that possible?
For example, if the line is only 4000mm I want the gap to be after 2000 instead of 5000.
AutoCad LT 2014
View 2 Replies
View Related
Mar 22, 2012
my linetype scales in model space look good, when i go to paper space to print the linetypes are huge and way out of wack. what is my problem?
View 3 Replies
View Related
May 17, 2013
Is it possible to creat a linetype that doesn't repeat.
What I'm after is a line consisting of:
Long Line
Space
Short Line (roughly 1/3 length of long line)
Space
Long Line
( ______ __ ______ )
But that is all I want to see, regardless of the distance between the start and end points. I use this a lot for laying out joists.
I know I could make a dynamic block of it, but that would mean streaching every line between the two points.
View 2 Replies
View Related
Sep 11, 2013
Is there a proper way to change the settings so the linetypes in model and layout will look the same? Or do I have to change ltscale?
View 7 Replies
View Related
Oct 7, 2011
I have recently started using AutoCAD so I'm still figuring it out. I would like to create a line like this
¯¯¯V¯¯¯¯¯¯V¯¯¯¯¯¯V¯¯¯¯¯¯V¯¯¯¯¯¯V¯¯¯ and another one like this ¯¯V¯¯ ¯¯V¯¯ ¯¯V¯¯ ¯¯V¯¯ ¯¯V¯¯ (where the Vs link up with the line).
I have tried to do this through the lin file and have failed. The lines don't meet up, the gaps aren't in the right place and the line does not run along the top but in the middle: I have fiddles around with it but it complicated and long to do. I have also investigated creating these lines using express tools but it seems that this tool is not an option in AutoCAD LT 2010.
View 9 Replies
View Related
Jul 24, 2013
Is it possible to find from which linetype file(acad.lin or acadiso.lin) , the existing linetype definitions (CENTER2) are loaded to the current drawing.
We have drawings, some of the linetype definitions are loaded from acad.lin.
Need to reload the linetypes from acadiso.lin.
View 3 Replies
View Related
Oct 15, 2012
I have downloaded a slew of AutoCAD linetype files and have tried to "cut and paste" them into my acad notepad with no success - (maybe that's where I'm going wrong, right off the bat). Anyway, after pasting the lines of text into my notepad and saving the updated notepad, I return to AutoCAD only to find that the linetypes are not available for use.
View 8 Replies
View Related
Feb 8, 2012
When I load the linetype file '' Load the Center Linetype acCurDb.LoadLineTypeFile(sLineTypeName, gstrc_SFR_LineType_FullFileName)
How do I detect if the linetype is in the Linetype file? How do I do my error checking here in the ACAD way? Currently I just search the acad.lin or sfr.lin Text File to see if the LineType Exists. This works.
But I was curious how would you check the linetype file via the Acad API,to see if the linetype definition name exists in the file?
View 2 Replies
View Related
Oct 11, 2012
I have a layer that's set up to use dashed lines, but in the drawing it comes out as a solid line.
View 4 Replies
View Related
Sep 16, 2013
In model space I draw a line with a particular linetype, say a fence row, and I adjust the linetype scale so that it reads like I want it, but then when I go to paper space, it's just a plain line no matter what I set the linetype scaling to?
View 9 Replies
View Related
Dec 9, 2011
When I draw a line at my template it always has the line type scale 5 as default under properties.
I know that I can chance this by hand or chance a basic line type scale with the command "lts".
But all the lines in the drawings of our partner have the line type scale 1 under properties. So if I used "lts", there would either my lines or their lines be scaled wrong. Also I don't want to chance the default line type scale of each line by hand.
Is there a possibility to set up something that each line I'm drawing, starts with a specific line type scale as default under properties?
View 7 Replies
View Related
Dec 17, 2012
I have a polyline in my drawing, consisting of arcs and lines all joined together. It is a waterline and I cannot get it to reverse.. it is reading ----M----- instead of -----W-----
View 9 Replies
View Related
May 16, 2012
I am wanting a soultion to a problem I am having when trying to have a combination of linetypes I either want psltscaled or not in a view port.
I.e. I want services linetypes to use psltscale = 1 and I want my linemarking linetypes to use a psltscale = 0, as I need the linemarking linetypes to show in the viewport at the original size they were created at but not the services linetypes as they look horrible.
View 9 Replies
View Related
Apr 25, 2013
I want to create a linetype just like this but cant seem to get it right..
View 3 Replies
View Related
Jul 4, 2012
We have a number of layers pre-set up to display the batting linetype at various scales:-
However when printing a "25mm" thick version of the batting linetype drawing it prints as a straight line. Our other scales are fine.
The linetype views correctly in model and paper space just not when printing.
View 2 Replies
View Related
Oct 22, 2011
How to create new layer and with line type?
View 2 Replies
View Related