AutoCad :: Not Getting Correct Linetype In Layer?

Oct 11, 2012

I have a layer that's set up to use dashed lines, but in the drawing it comes out as a solid line.

View 4 Replies


ADVERTISEMENT

AutoCad :: Apply Layer Color / Linetype / Properties To Objects On Layer

Feb 15, 2013

I have a bunch of objects on a particular layer, and they're all different colors and linetypes and lineweights, and i want them to all take on the color / linetype / lineweight that i chose for that layer.. how do i do this?

View 1 Replies View Related

AutoCad 2D :: Multiline By Layer Linetype Does Not Change With Layer?

Dec 20, 2011

I have existing multilines with linetypes set to byLayer, yet when the linetype on the layer changes, the Multiline linetype does not. Is there any way to get the linetype to change with the layer?

View 1 Replies View Related

AutoCAD VB :: Create New Layer With Linetype

Oct 22, 2011

How to create new layer and with line type?

View 2 Replies View Related

AutoCAD LT :: Change Linetype Scale For A Layer?

Oct 3, 2011

I want to change my ground conductor from solid green to a dashed line (green is OK) on a set of drawings, but all the dashed linetypes I can find don't show up well at the scale that I've drawn the circuits.  I can make them look OK by changing the linetype scale in the properties manager window, but there are a boatload of these lines in eight viewports; finding them all would be a major pain.  They are all on a single layer, though, but in the layer properties manager I do not see a way to change the linetype scale for the layer. I could use the properties manager to make the change if I could select everything on the layer. Is there a way to do that? 

View 4 Replies View Related

AutoCAD 2013 :: How To Fix Association Of Layer And Linetype

Sep 20, 2012

rather than each time i change layers having to fix layer and linetype to each other how do i more permenatly fix the two together?

View 1 Replies View Related

AutoCAD 2013 :: List All Linetype From Layer

Jun 26, 2013

I have a layer named XYZ, that contains ARC, LINE and POLYLINE. I want to get a list of all linetypes from every ARC, LINE and PLINE. If I open the properties, if I select only the ARC, under linetype I'm getting *Varies*. Instead of*varies*, I would like to have a list of all linetypes (ARC, LINE and PLINE).

Is it possible? WOuld it also be possible to do the same for linescale or weight?

View 5 Replies View Related

AutoCad :: Changing Linetype Scale For Just One Layer

Mar 11, 2004

I have loaded an insulation linetype and I needed to make the ltscale of that line .194 in the linetype manager so that it would fit in my 3.5" walls.I would like my insulation linetype to always be drawn at .194 ltscale. All of my other lines/linetypes I would like to stay at 1.00

When I changed the linetype scale of the insulation to .194 every other ltscale went with it. Is it possible to change one ltscale independently of all your other linetypes?

View 8 Replies View Related

AutoCAD 2013 :: Adding Linetype To Layer Macro

Sep 24, 2013

I created a macro to insert layers with a click of the button. I was wonder how I get my macro to add the linetype to it. Also would like a separate macro to make the layer not to plot.

Here is the Macro I'm using:  ^C^C-layer;new;A-ANNO-AREA-IDEN;color;6;A-ANNO-AREA-IDEN;;

View 1 Replies View Related

AutoCAD 2013 :: Layer Manager Can't See VP Color And Linetype

Jun 10, 2013

On Layer Manager can't see VP Color and VP Linetype see picture.

View 9 Replies View Related

AutoCAD Inventor :: Section Line Ignoring Layer Linetype

Oct 7, 2013

The linetype set in the active standard for section line is totally ignored when creating a section view. We have our line type set to 'Long Dash Dot' as per the BS8888 standard but it changes it to a 'Long Dash Short Dash' line. We use the same linetype on the centerline layer with no problem. Why does this not work??

Inventor 2012 SP2

View 3 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Rename Layer And Change Linetype

Jun 24, 2009

I need to do three things in a LISP routine for around 200 drawings. First, I need rename lots of old layer to new standard layer name, like change layer name "CL-RAILWAY-0" to new layer name "CL-0".

Secondly, I need translate some layer to standard layer, like all the things on layer "CL-WATER-160" to layer "CL-0"

Last, change some linetype, like change linetype"CENTER" to "CENTERLINE". I can do all those things by "CHECKSTANDARD" manually, but I really need someway faster and easier.

View 9 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Auto Change To Layer 0 And Linetype?

Mar 9, 2012

how to write a lisp that when i activate it, it will change all the objects in the drawings to be change to "Layer 0" and all linetypes "Dashed" change to be "hidden"...

View 9 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Converting Objects Of Certain Linetype To A New Layer

Oct 26, 2012

I would like converting all objects that has forced linetype to be on a linetype layer.

So if there are objects that have forced linetypes - dashed/hidden/phantom, etc., those entities would be moved to a linetype layer based on their forced linetype.   The entities would all be changed to color bylayer, linetype bylayer.

So if there is a rectangle that is sitting on an EQUIPMENT layer, the routine would put that rectangle on a new layer called DASHED and change its forced linetype to BYLAYER.

Lastly, once that's done, the next and final step is to locate a the existing layers with matching linetype - say, OBJECTS with DASHED as a linetype, and merging it to that layer.

View 9 Replies View Related

AutoCad :: Dimensions Automatically Added To Correct Layer

Feb 7, 2013

My quest: if your in a different layer working on adding walls for eg. You want add a dimension to that wall. When I hit DLI, How do I make sure that the dim i just entered goes directly to the DIM layer instead of the wall layer.

View 3 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Force Change Linetype And Layer To Preset Preference?

Mar 7, 2012

Is there any way with a click of a button by using LISP, it will change all the selected object to be changed to a pre-set layer...

Example, after i select a certain entities in a drawing, with LISP, it will change all the object to layer "0"?

Additionally, u also need it to change all selected entities that are in "dashed" linetype to be change to "hidden" linetype..

View 3 Replies View Related

AutoCAD Civil 3D :: Surface Contours Correct With One Layer State

Apr 9, 2013

I have a surface that shows perfectly when restoring the PCSM layer state (Old LMAN function). When I restore the Grading layer state - the surface contours show incorrectly.

It is like a hide or mask feature turns on and off.

View 1 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Change All Block Element To Layer 0 Without Changing Color / Linetype

Sep 3, 2013

I have too many blocks with specific layers inside.

develope lisp can change all to layer 0 but keep color and linetype as it is.

I will use this as a part of script to change multiple block.

View 9 Replies View Related

AutoCAD 2013 :: Copy Linetype Definition From Drawing To Linetype Definition File?

Nov 14, 2012

How can I copy a linetype definition from a drawing to the linetype definition file?

View 7 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Annotation Command Set Correct Layer For Duration Of Command

Nov 21, 2010

I am currently writing a series of routines for setting the layers for text, leaders and dimension commands. The end goal is a system where any annotation command sets the correct layer for the duration of the command, then reverts back to the layer that was active before the command.

I have managed to complete all the code, and it appears to be working fine, I just have one question: I have used -layer "m" "Lay_name" etc... for all layer setting commands, rather than any code to see if the layer exists already. In my limited testing this seems to be suitable, nothing that exists on that layer seems to be affected.

I know how to write code to determine if the layer exists already and set the layer instead, but so far it seems unnecessary??

View 8 Replies View Related

Illustrator :: Find Correct Color Book In Which To Locate Correct PMS Color

Feb 18, 2013

I'm trying to create a swatch in Illustrator with our company's colors. I already succeedid in creating a palet with the RGB and CMYK colors, but I also want to do this with the PMS colors.However, I can't seem to find the correct color book in which to locate the correct PMS color.

I only have the number of the PMS color, I don't know which color book to choose?

View 2 Replies View Related

AutoCAD Map 3D :: Linetype Add-ons

Jun 14, 2013

I am new to AutCAD and where I can find or purchase line tpes specific to development (i.e. water, san, storm, edge of payment, top of slope, etc).

I do not have time to learn how to make linetypes as I am still learning the basics of the program.

View 2 Replies View Related

AutoCad :: Create A New Linetype

Apr 2, 2004

How i would create a new linetype in AutoCAD LT 2004. For example creating an electrically traced line that is a dashed line with the letter E in the line.

View 6 Replies View Related

AutoCad 2D :: Make A New Linetype?

Nov 8, 2012

I work with a drawing that for some reason don't have a proper fence line in it. I tried to load another .lin file, but still the fence line looks funny. The line I'm after looks and work ok in alla other files but this one!

I tried to copy paste a fence line from another drawing but what's pasted is just half the linetype...

The line should look like this -- / ---- / ---- / ---- but comes in as -- ---- ---- ----

Why do I loose the slashes?

*FENCEONBOUNDARY, Fence on boundary _____ / _____ / _____ / _____
A,.7,["/",STANDARD,S=.05,R=0.0,X=-0.1,Y=-.05],.1

The result should look like ----- / ----- / ----- / -----

View 4 Replies View Related

AutoCad :: Set Linetype Scale

Jul 15, 2011

i set linetype scale in one of the drawing which is lts value is set to 900..when i select line and open option in order to set linetype scale it show the message..

View 3 Replies View Related

AutoCad 2D :: Create A New Linetype?

Apr 25, 2013

I looked through other threads and I still couldnt get it figured out. I am trying to make a linetype like the attached image..

View 7 Replies View Related

AutoCAD 2013 :: Apply Layer Filter To Layer Toolbar Disables Function Of Layer Filters In Tool Palette

Aug 1, 2012

It appears that the Layer Filters functionality is broken again with 2013. Unchecking the "Apply layer filter to layer toolbar" disables the function of layer filters in the tool palette.

View 5 Replies View Related

AutoCAD 2013 :: How To Select By Linetype

Aug 14, 2013

I am autocad 2010 user. I have drawing files from consultants with custom linetypes. I have deleted the. shx file but need to change line type. How do I select the relevant lines to convert to normal line type?

View 2 Replies View Related

AutoCAD LT :: Linetype Not Showing Up In 2013?

Mar 5, 2013

I am currently running AutoCAD 2013 LT on a Windows 7 64 bit system.  I was recently running this same software on a 32 bit system computer and everything was running properly.  After the upgrade, I have noticed a linetype issue that I cannot seem to get a handle on.

We use a "insul" linetype on building sections that should come out looking like an architectural insulation pattern.  After upgrading to the new computer, this linetype only reads as dots, nothing else.  I have gone to other comnputers in the office that are displaying this linetype properly and have copied their acadlt.lin as well as acadltiso.lin files over to my computer and it has not solved the problem.

View 3 Replies View Related

AutoCAD Map 3D :: Linetype Changing Scales

Jun 15, 2012

I am using Map 3D 2013

I have several drawings in which I want to use a line type (centrex2) at a specific scale. The scale setting is exactly the same in all the drawings but in some the line type is coming out at different scales, all larger, but not the same or to a set factor. All the entities in question are poly lines (2d).

I have checked in all drawings that:
 
global scale factor and current object scale in the line type manager are the same (1.0)drawing units are the same (unitless)‘use paper space units for scaling’ is always deselected line type generation is always enabled.

View 1 Replies View Related

AutoCAD LT :: Create Linetype With Text?

Jun 7, 2012

Currently in process of a quick fix, trying to create a linetype that should place a number in between the lines.

*One, Places 1 in between lines A,5000,-50,["1",CompatecStandard,U=0,Y=-125],-150

That's as far as I've gotten and it pretty much does what I want it too, but right now it is set to 5000mm before it makes a gap with a number. I would like that gap to be dependent on the length of the line... is that possible?

For example, if the line is only 4000mm I want the gap to be after 2000 instead of 5000.

AutoCad LT 2014

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved