AutoCAD VB :: Create New Layer With Linetype
Oct 22, 2011How to create new layer and with line type?
View 2 Replies
ADVERTISEMENT
AutoCad :: Apply Layer Color / Linetype / Properties To Objects On Layer
Feb 15, 2013I have a bunch of objects on a particular layer, and they're all different colors and linetypes and lineweights, and i want them to all take on the color / linetype / lineweight that i chose for that layer.. how do i do this?
View 1 Replies View RelatedAutoCad 2D :: Multiline By Layer Linetype Does Not Change With Layer?
Dec 20, 2011I have existing multilines with linetypes set to byLayer, yet when the linetype on the layer changes, the Multiline linetype does not. Is there any way to get the linetype to change with the layer?
View 1 Replies View RelatedAutoCad :: Not Getting Correct Linetype In Layer?
Oct 11, 2012I have a layer that's set up to use dashed lines, but in the drawing it comes out as a solid line.
View 4 Replies View RelatedAutoCad :: Create A New Linetype
Apr 2, 2004How i would create a new linetype in AutoCAD LT 2004. For example creating an electrically traced line that is a dashed line with the letter E in the line.
View 6 Replies View RelatedAutoCad 2D :: Create A New Linetype?
Apr 25, 2013I looked through other threads and I still couldnt get it figured out. I am trying to make a linetype like the attached image..
View 7 Replies View RelatedAutoCAD LT :: Change Linetype Scale For A Layer?
Oct 3, 2011I want to change my ground conductor from solid green to a dashed line (green is OK) on a set of drawings, but all the dashed linetypes I can find don't show up well at the scale that I've drawn the circuits. I can make them look OK by changing the linetype scale in the properties manager window, but there are a boatload of these lines in eight viewports; finding them all would be a major pain. They are all on a single layer, though, but in the layer properties manager I do not see a way to change the linetype scale for the layer. I could use the properties manager to make the change if I could select everything on the layer. Is there a way to do that?
View 4 Replies View RelatedAutoCAD 2013 :: How To Fix Association Of Layer And Linetype
Sep 20, 2012rather than each time i change layers having to fix layer and linetype to each other how do i more permenatly fix the two together?
View 1 Replies View RelatedAutoCAD 2013 :: List All Linetype From Layer
Jun 26, 2013I have a layer named XYZ, that contains ARC, LINE and POLYLINE. I want to get a list of all linetypes from every ARC, LINE and PLINE. If I open the properties, if I select only the ARC, under linetype I'm getting *Varies*. Instead of*varies*, I would like to have a list of all linetypes (ARC, LINE and PLINE).
Is it possible? WOuld it also be possible to do the same for linescale or weight?
AutoCad :: Changing Linetype Scale For Just One Layer
Mar 11, 2004I have loaded an insulation linetype and I needed to make the ltscale of that line .194 in the linetype manager so that it would fit in my 3.5" walls.I would like my insulation linetype to always be drawn at .194 ltscale. All of my other lines/linetypes I would like to stay at 1.00
When I changed the linetype scale of the insulation to .194 every other ltscale went with it. Is it possible to change one ltscale independently of all your other linetypes?
AutoCAD LT :: Create Linetype With Text?
Jun 7, 2012Currently in process of a quick fix, trying to create a linetype that should place a number in between the lines.
*One, Places 1 in between lines A,5000,-50,["1",CompatecStandard,U=0,Y=-125],-150
That's as far as I've gotten and it pretty much does what I want it too, but right now it is set to 5000mm before it makes a gap with a number. I would like that gap to be dependent on the length of the line... is that possible?
For example, if the line is only 4000mm I want the gap to be after 2000 instead of 5000.
AutoCad LT 2014
AutoCAD 2010 :: Create A New Linetype?
Apr 25, 2013I want to create a linetype just like this but cant seem to get it right..
View 3 Replies View RelatedAutoCAD 2010 :: Create A Linetype
Jul 1, 2013Is it possible to create a linetype that has a shape that and spacing between the shape that would always be the same? I want to create a linetype that would have a shape that would always be 2 feet across with 20 feet between each occurance whether its in a 20 scale view port or a 60 scale view port.
View 4 Replies View RelatedAutoCAD 2013 :: Adding Linetype To Layer Macro
Sep 24, 2013I created a macro to insert layers with a click of the button. I was wonder how I get my macro to add the linetype to it. Also would like a separate macro to make the layer not to plot.
Here is the Macro I'm using: ^C^C-layer;new;A-ANNO-AREA-IDEN;color;6;A-ANNO-AREA-IDEN;;
AutoCAD 2013 :: Layer Manager Can't See VP Color And Linetype
Jun 10, 2013On Layer Manager can't see VP Color and VP Linetype see picture.
View 9 Replies View RelatedAutoCad 2D :: Create Linetype With Arrow Shape
Jan 29, 2014I'm looking to create a linetype where I can incorporate a specific arrow shape. The best way of going about this? The application is to show on general layout plans the escape route with a polyline with the incorporate arrow.
Until now I have been drawing a standard PL then adding the arrows manually .
AutoCAD Civil 3D :: Create Linetype With Text?
Mar 12, 2013I am trying to create a linetype(actually multible linetyes) for Civil drawings. I need the line type to have the following text..........12" W. I have tried to edit and existing linetype but for some reason the string does not seem to like me using the inch (") symbol. Any proper way to generate this linetype and I should be able to edit it to get all the other line sizes I need.
View 5 Replies View RelatedAutoCad :: Create Linetype For Stormwater Pipes
Feb 20, 2012I need to create this linetype for stormwater pipes( please see attachment). Is it a special linetype or a block or ... ???
View 9 Replies View RelatedAutoCad 2D :: Create A Custom Linetype For A Drawing
May 28, 2013I want to create a custom linetype for a drawing but am unsure of the best method to use. I only need this linetype for 1 drawing and so I would like it embedded in that drawing if possible. Other people may need access to this file so sending a custom file is out of the question.
Should I create a new .lin file or edit the default acad.lin?
I started to create one using Express Tools and when it prompted me to create / save a new .lin file it defaulted to the 'C:Program FilesAutodeskAutoCAD 2012 - English' folder. I was unsure if to save it here or 'C:Program FilesAutodeskAutoCAD 2012 - EnglishUserDataCacheSupport', where ACAD's .lin is stored.
AutoCAD Inventor :: Section Line Ignoring Layer Linetype
Oct 7, 2013The linetype set in the active standard for section line is totally ignored when creating a section view. We have our line type set to 'Long Dash Dot' as per the BS8888 standard but it changes it to a 'Long Dash Short Dash' line. We use the same linetype on the centerline layer with no problem. Why does this not work??
Inventor 2012 SP2
AutoCAD Visual LISP / AutoLISP :: Rename Layer And Change Linetype
Jun 24, 2009I need to do three things in a LISP routine for around 200 drawings. First, I need rename lots of old layer to new standard layer name, like change layer name "CL-RAILWAY-0" to new layer name "CL-0".
Secondly, I need translate some layer to standard layer, like all the things on layer "CL-WATER-160" to layer "CL-0"
Last, change some linetype, like change linetype"CENTER" to "CENTERLINE". I can do all those things by "CHECKSTANDARD" manually, but I really need someway faster and easier.
AutoCAD Visual LISP / AutoLISP :: Auto Change To Layer 0 And Linetype?
Mar 9, 2012how to write a lisp that when i activate it, it will change all the objects in the drawings to be change to "Layer 0" and all linetypes "Dashed" change to be "hidden"...
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Converting Objects Of Certain Linetype To A New Layer
Oct 26, 2012I would like converting all objects that has forced linetype to be on a linetype layer.
So if there are objects that have forced linetypes - dashed/hidden/phantom, etc., those entities would be moved to a linetype layer based on their forced linetype. The entities would all be changed to color bylayer, linetype bylayer.
So if there is a rectangle that is sitting on an EQUIPMENT layer, the routine would put that rectangle on a new layer called DASHED and change its forced linetype to BYLAYER.
Lastly, once that's done, the next and final step is to locate a the existing layers with matching linetype - say, OBJECTS with DASHED as a linetype, and merging it to that layer.
AutoCAD Civil 3D :: Create New Linetype Using Arrows To Show Direction Of Flow?
Jan 28, 2013I am trying to create a new linetype using arrows to show the direction of a flow. I can get the outline of my arrow head to save as a shape, but have not figured out how to save the hatching to show up in a linetype. I need the arrow head to be shaded in solid. Also is there any downloadable linetypes out there for Civil 3D?
View 5 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: How To Create Linetype With Double Lines
Aug 12, 2012I want to know how to create linetype with double lines one rectangle empty and other with solid in autocad(i am using autocad 2004)I tried by express tools with command mkshape (and then makelinetype command) but it is coming without solid, is it possible in autocad by using Autolisp, see attached dwg, name is linetype_ds
View 2 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Force Change Linetype And Layer To Preset Preference?
Mar 7, 2012Is there any way with a click of a button by using LISP, it will change all the selected object to be changed to a pre-set layer...
Example, after i select a certain entities in a drawing, with LISP, it will change all the object to layer "0"?
Additionally, u also need it to change all selected entities that are in "dashed" linetype to be change to "hidden" linetype..
AutoCAD Visual LISP / AutoLISP :: Change All Block Element To Layer 0 Without Changing Color / Linetype
Sep 3, 2013I have too many blocks with specific layers inside.
develope lisp can change all to layer 0 but keep color and linetype as it is.
I will use this as a part of script to change multiple block.
Revit :: Create Custom Linetype?
Aug 31, 2011I am trying to create a custom detail line, if possible?
Is there any way to create a custom detail line which will be a dashed line (similar to Hidden) as well as containing arrows every "X" feet or inches. i am attaching an image that is what i would like to create so i don't draw from scratch.
I would like for it to function as a line, spline, shape, whatever the needs may be.
AutoCAD 2013 :: Copy Linetype Definition From Drawing To Linetype Definition File?
Nov 14, 2012How can I copy a linetype definition from a drawing to the linetype definition file?
View 7 Replies View RelatedAutoCad 2D :: Create New Layer And Set It As Current In Layer Manager?
Nov 18, 2011I'm currently using AutoCAD LT 2012 and when I create a new layer and set it as current in the layer manager, regardless of what color I set the new layer to, the new layer's color remains the same as the previous one in the properties box even though the colors of the layers are always set to "by layer."
View 3 Replies View RelatedPhotoshop :: When / Why To Create Master Layer In CS6 For Multi-layer Image
Sep 14, 2012A link or a brief explanation of"when & why" and "how to use" a master layer when working with a multi - layered image (psd or psb) file in CS6.
I've seen a couple of tutorials that make use of a "master layer" but I don't understand the "when & why.