AutoCad :: Create Linetype For Stormwater Pipes
Feb 20, 2012I need to create this linetype for stormwater pipes( please see attachment). Is it a special linetype or a block or ... ???
View 9 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Way To Create Parts List For HDPE Pipes
Sep 19, 2012Any way to create a parts list for HDPE pipes where instead of a manhole connecting different pipe sections will run continuously with coupling and elbows and it will connect to other pipe segments using wyes. Is this possible? The pipe should be able to bend either horizontally or vertically like any HDPE pipe. Any HDPE library?
My other question is once I have the layout of the pipe is it possible to calculate the trench excavation and backfilling?
AutoCAD Civil 3D :: Create A Table That Will Incorporate Info From Structures And Pipes
Aug 19, 2011I am trying to create a table that will incorporate info from structures and pipes. In C3d 2010 I want to make a CB chart which will show the pipe size, starting structure and invert. I would also like to include the CB rim elevation but that would be under the structure table. Is there any way I can combine the RIm elevation with the pipe table?
View 4 Replies View RelatedAutoCad :: Create A New Linetype
Apr 2, 2004How i would create a new linetype in AutoCAD LT 2004. For example creating an electrically traced line that is a dashed line with the letter E in the line.
View 6 Replies View RelatedAutoCad 2D :: Create A New Linetype?
Apr 25, 2013I looked through other threads and I still couldnt get it figured out. I am trying to make a linetype like the attached image..
View 7 Replies View RelatedAutoCAD LT :: Create Linetype With Text?
Jun 7, 2012Currently in process of a quick fix, trying to create a linetype that should place a number in between the lines.
*One, Places 1 in between lines A,5000,-50,["1",CompatecStandard,U=0,Y=-125],-150
That's as far as I've gotten and it pretty much does what I want it too, but right now it is set to 5000mm before it makes a gap with a number. I would like that gap to be dependent on the length of the line... is that possible?
For example, if the line is only 4000mm I want the gap to be after 2000 instead of 5000.
AutoCad LT 2014
AutoCAD 2010 :: Create A New Linetype?
Apr 25, 2013I want to create a linetype just like this but cant seem to get it right..
View 3 Replies View RelatedAutoCAD VB :: Create New Layer With Linetype
Oct 22, 2011How to create new layer and with line type?
View 2 Replies View RelatedAutoCAD 2010 :: Create A Linetype
Jul 1, 2013Is it possible to create a linetype that has a shape that and spacing between the shape that would always be the same? I want to create a linetype that would have a shape that would always be 2 feet across with 20 feet between each occurance whether its in a 20 scale view port or a 60 scale view port.
View 4 Replies View RelatedAutoCad 2D :: Create Linetype With Arrow Shape
Jan 29, 2014I'm looking to create a linetype where I can incorporate a specific arrow shape. The best way of going about this? The application is to show on general layout plans the escape route with a polyline with the incorporate arrow.
Until now I have been drawing a standard PL then adding the arrows manually .
AutoCAD Civil 3D :: Create Linetype With Text?
Mar 12, 2013I am trying to create a linetype(actually multible linetyes) for Civil drawings. I need the line type to have the following text..........12" W. I have tried to edit and existing linetype but for some reason the string does not seem to like me using the inch (") symbol. Any proper way to generate this linetype and I should be able to edit it to get all the other line sizes I need.
View 5 Replies View RelatedAutoCad 2D :: Create A Custom Linetype For A Drawing
May 28, 2013I want to create a custom linetype for a drawing but am unsure of the best method to use. I only need this linetype for 1 drawing and so I would like it embedded in that drawing if possible. Other people may need access to this file so sending a custom file is out of the question.
Should I create a new .lin file or edit the default acad.lin?
I started to create one using Express Tools and when it prompted me to create / save a new .lin file it defaulted to the 'C:Program FilesAutodeskAutoCAD 2012 - English' folder. I was unsure if to save it here or 'C:Program FilesAutodeskAutoCAD 2012 - EnglishUserDataCacheSupport', where ACAD's .lin is stored.
AutoCAD Civil 3D :: Create New Linetype Using Arrows To Show Direction Of Flow?
Jan 28, 2013I am trying to create a new linetype using arrows to show the direction of a flow. I can get the outline of my arrow head to save as a shape, but have not figured out how to save the hatching to show up in a linetype. I need the arrow head to be shaded in solid. Also is there any downloadable linetypes out there for Civil 3D?
View 5 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: How To Create Linetype With Double Lines
Aug 12, 2012I want to know how to create linetype with double lines one rectangle empty and other with solid in autocad(i am using autocad 2004)I tried by express tools with command mkshape (and then makelinetype command) but it is coming without solid, is it possible in autocad by using Autolisp, see attached dwg, name is linetype_ds
View 2 Replies View RelatedRevit :: Create Custom Linetype?
Aug 31, 2011I am trying to create a custom detail line, if possible?
Is there any way to create a custom detail line which will be a dashed line (similar to Hidden) as well as containing arrows every "X" feet or inches. i am attaching an image that is what i would like to create so i don't draw from scratch.
I would like for it to function as a line, spline, shape, whatever the needs may be.
AutoCAD 2013 :: Copy Linetype Definition From Drawing To Linetype Definition File?
Nov 14, 2012How can I copy a linetype definition from a drawing to the linetype definition file?
View 7 Replies View RelatedAutoCad 3D :: Pipes Won't Go Through Each Other
Jul 20, 2012I've managed to reproduce it in 3D using AutoCAD 2007 (attached). I need to know what the cross section or the intersection ends of the pipes are. I'm planning to print the view paste it on an actual pipe and have it cut (sort of like sheet metal development). These pipes won't go through each other but be welded instead. I also have downloaded LITIO software to aid me in getting the development views but I am not sure if the angles I enter are correct due to the complexity of the design.
View 3 Replies View RelatedAutoCad :: How To Draw Pipes
Jan 23, 2011I am a mech design fellow designing mech parts like coupling, brackets etc.. recently i am tasked to draw pipes.. just pipes with 2 or 3 bends at different angles / axis..
so your assistance needed is in ..
(a) how to draw pipes with bend angles in 2d and dimension them..
(b) if possible, pl give some sample dwg files.
AutoCAD Inventor :: Pipes Looks Exactly The Same But Different Weight?
Oct 12, 2012Take a look at these two pipes and let me know why they each have a different mass when they can be overlayed and appear the same?
View 3 Replies View RelatedAutoCAD Civil 3D :: How To Add Pressure Pipes
Apr 17, 2013I've been able to publish and then import valves, flange adaptors etc. with no problem, but if I create a flanged (metric) pipe using the Content Catalog Editor and then draw the pipe in C3D it shows blank ends, no flanges. I've split the pipe in the drawing to see if that forces flanges to appear, but nothing.
Do I need to create the flanges seperately and then add them to the end of pipes?
I'm using Civil 3D 2013
AutoCAD Civil 3D :: Inner Diameter Of Pipes In SSA
Sep 30, 2013I am modelling a sewer pipe network in SSA. At some stages we use varies pipe materials with different wall thicknesses. So I want to know how can I assign inner diameter of pipes in SSA so I just deduct wall thickness from pipe diameter and then assign it to the pipe. Or is there any possibility to make a pipe list with specific properties like part builder in civil3d?
View 5 Replies View RelatedAutoCAD Civil 3D :: Breaking Pipes?
Nov 4, 2013Is there any way to split a pipe (in a non-pressure network) in two?
View 2 Replies View RelatedAutoCAD Civil 3D :: Pipes In Profile
Apr 21, 2013why when i mesure the pipe diam prependicular in profile its less than the accurat dimension of the pipe whoever i changed the profile vertical exaggeration to 1, it still wrong? when mesured virtical it is ok
View 8 Replies View RelatedAutoCAD Civil 3D :: Pipes With Box Culverts
Jul 5, 2013I have a 8'x7' Box culvert with manholes. The manhole needs to sit on top of the 8'x7' boxes. I also want to see the pipe drawn from center of manhole to center of manhole. not stop at manhole wall.
[URL]....
AutoCAD Civil 3D :: Multi Barrel Pipes
Nov 24, 2013What the best way to draw multiple parallel pipes that cross a corridor. In my example I have a track with 4 pipes crossing the track corridor on slightly different alignments (from perpendicular to skewed). I have drawn the pipes on as individual pipes under the same network.
However I cannot get them all to display on the profile. I have tried "Draw Parts in Profile" but it seems to bring up only 1 pipe. managing multiple pipes.
AutoCAD Civil 3D :: Crossing Pipes In Profile?
Mar 12, 2012I have two pipe networks and two profile views, one for storm and another for sanitary. I would like to show the crossing pipes on each of the profile views. When I select the profile view, add a pipe and change the style to crossing the style is change to crossing on the other profile view (ex. on sanitary profile view I set storm pipe 3 to crossing style, on the storm profile pipe 3 changes to crossing style and does not display). Isn't there a way to display the styles for pipes different in each profile view?
C3D 2011 (latest updates)
Win 7 Pro, 64-bit
16 GB RAM
AutoCAD Civil 3D :: Pipes Extending Beyond Profile?
Jun 22, 2009I have a profile with a couple of pipe networks in it. One of the pipes shown extends beyond the edge of the profile at some crazy angle. look at the picture for a better explanation.
View 5 Replies View RelatedAutoCAD Civil 3D :: Pipes Will Not Show Up In Drawing
Apr 25, 2013When I try to make a pipe network the structures are visible but the pipes are not present. I thawed all layers with no success. This is a recent development because It was working last week.
View 2 Replies View RelatedAutoCAD Civil 3D :: Drawing Pipes In Profile
Sep 17, 2013How to do profiles in Civil3D and I have created a profile from the surface utilizing a miscellaneous alignment. I have also taken one 12"RCP and made it part of a network along with the catch basin and manhole at its start and end. When I click "draw parts in profile" it places both structures and the pipe, but in reality only a portion of the pipe crosses the alignment. I'd like to only display portions of pipes that cross the alignment at a fixed width form that alignment, say 2' to each side of it.
View 9 Replies View RelatedAutoCAD Civil 3D :: Pipes Table In Excel?
May 22, 2006I have a number of tables which have all properties about the pipe network with the cooridnates and upstream/ downstream info. Can it import to C3D and automatically generate the pipe to 3D?
View 9 Replies View RelatedAutoCAD Civil 3D :: Existing Vs Proposed Pipes
Jun 3, 2013I'm a bit of a Civil 3D newbie. I've got a project that involves addition of storm drain to existing storm pipes. I'd like to be able to use Civil 3D to include existing and proposed pipes in the networks, but be able to show existing pipes differently than proposed pipes on plans and profiles, i.e. screened. I can't seem to figure out a way to do this--I can effect changes to all networks, but not invididual pipes.
View 9 Replies View Related