I am trying to create a table that will incorporate info from structures and pipes. In C3d 2010 I want to make a CB chart which will show the pipe size, starting structure and invert. I would also like to include the CB rim elevation but that would be under the structure table. Is there any way I can combine the RIm elevation with the pipe table?
View 4 Replies
why I can't label certain pipes/structures? I can select the pipe or structure, rt click, add label and I get nothing. The layer is on cause I can see other labels. I also get the same result when I go to annotation, pipe label. This only happenes to certain pipes or structure, others in the same network label fine.
View 9 Replies View RelatedIn a run of pipes and structures, I have 3 structures that overflow. 2 of the structures max hgl els are even with the rim elevation (as is in the case of other runs in the same project), and 1 structure has the max hgl exceeding the elev of the rim. Why this one and not the others?
View 2 Replies View RelatedI'm trying draw profile, I see "compile error can't find project or library",
then I select "convert VBA pipe and structure rules to .NET" it works until I turn off civil 3d
how to do, that it works for everytimes?
I am attempting to customize a Pipes and Structures report but am having difficulty changing the % slope column to run over rise.
View 2 Replies View RelatedI oftenly do conception for parkings and always need to have the calculated rentention of water volume in the pipe network.is there a way to have that information with Civil 3d ?
Googled the subject and i only found a topic on trench's for the pipes ...
Cyberflow
Using : Autodesk Civil 3D 2012
OS : Windows 7 - 64 bit pro
Is there a way to label multiple structures/pipes at one time in profile view? We have tried selecting all at one time, right click and add label, but it only labels one of the structures/pipes.
View 4 Replies View RelatedI am using Civil 3D 2013. I work in an office where we have a few different flavors of Autocad (LT, MEP, regular vanilla AutoCAD etc...) and versions (2010 LT, 2011, 2012, 2013).
For the most part there isn't much inter-office drawing coordinate that has to happen, but there is the occasional project where multiple disciplines (Structural, Mechanical and Civil Site) have to share drawings.
The specific problem I am having is when I share my 2013 Civil 3D drawing with a user using 2011 MEP. He gets the typical rectangle for the proxy objects (in my case, my pipe networks for sanitary and storm drain). We've tried downloading and installing various object enablers, but there doesn't seem to be one for a 2013 to 2011 scenario. So I setup my parts to be on layers that he can just turn off. HOWEVER... the actual pipe network (not the structures, parts, labels etc... the network itself) ends up on layer 0. For this specific project, I do the old (ssget "x" '((8 . "0")) search to select all objects on layer 0, add those objects to a selection set (pselect), then in my modify objects dialog I filter for pipe networks, then change the layer to something other then 0.
While this is a workaround that works for me, what I really want to know is if there is a way that I can change the default layer that the network (again, not pipes, structures or text, the actual network) so I don't have to use the workaround. Any thoughts?
P.S. It's killing me that I had to create a new Autodesk login and now all my AutoCAD "street cred" is lost
"The source of expertise is not in the memorization of the minute details of a subject but in the thorough understanding of the fundamental concepts on which it is based."
I have a number of tables which have all properties about the pipe network with the cooridnates and upstream/ downstream info. Can it import to C3D and automatically generate the pipe to 3D?
View 9 Replies View RelatedI want to be able to make a alignment table with northing and easting coordinates for the following:
bop
pi's
eop
Is this possible? The closest I get is to make a curve table with the pi coordinates and no bop or eop coord'.
Civil 3D 2014
Win 7
I'm currently working on a very large Dwg, with multiple pipe networks both sanitary, Storm and pressure pipe.
I need to create a .csv file for all my structures for Stakeout. I know I can go into my toolbox and create a report through the reports manager. The problem is that its giving me too much information, all I want is PNEZD. How can I create this report or edit that report being generated?
Any way to create a parts list for HDPE pipes where instead of a manhole connecting different pipe sections will run continuously with coupling and elbows and it will connect to other pipe segments using wyes. Is this possible? The pipe should be able to bend either horizontally or vertically like any HDPE pipe. Any HDPE library?
My other question is once I have the layout of the pipe is it possible to calculate the trench excavation and backfilling?
I created an enclosed "object" adding break lines to two different surfaces.
The blue surface shown on the attached drawing is a set of break lines added to "Surface A" and then the red is the other set of break lines added to "Surface B". I have already generated the volume enclosed within the surfaces by doing a surface to surface volume calculation.
My Question:I want to combine the enclosed volume created by Surface A & Surface B into a 3D "Block" that give me the volume information.
To workaround the missing API for creating Parcel Area Tables, I have tried the following:
1. Create a "pick point" selection set (using ObjectARX), containing the Parcel for which I want to create a table.
2. Execute the AddParcelTable command.
3. Programmatically push the Select Parcel-button and the OK button of the Create Table dialog using win32 API.
When the Select Parcel button is pressed, the label next to it displays 1 parcel(s) selected and when the OK button is pressed, Civil prompts the user to pick the upper left corner of the table, but the prompt is immediately interrupted with the message "Invalid 2D point" and the table creation is aborted...
How would I create a Point Table that would allow me to have Point#, Type, Size in individual columns when I have decription keys that area like this;
GUM 6 to be a 6" GUM.
Is there any way to have the data for the Type in one colum and the size in another?
C3D12
C3D12-13
Win7x64 6gb
I'm trying to create a stage-storage table with six closed 2D polylines. They highlight when I select them, but nothing is loading in the Table?
View 8 Replies View RelatedI have a general table in my engineered print. It consists of basic columns with text. How can i have Inventor refresh the data if i change the Excel without having to delete and re insert a table ?
Autodesk Inventor Professional 2011
Any program that can accept point clouds (which will be millions of points) from a 3D laser? Then we would like to create a solid model of the structures and piping.
View 5 Replies View RelatedIs there a way to create a table of stations and offsets along a specific alignment at chosen locations?
Dynamic would be preferred.
I'm currently using version 2013.
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
I've spent the last 4 hours searching for an answer to this question, but I simply can't find one.
As a start I think you have to know that I'm currently using AutoCAD 2012.
Here's the problem: I need to extract some info from an AutoCAD table to a reference file that can be opened in Microsoft Excel. Everything I find on the subject is actually an answer to the question "How does <DATAEXTRACTION> work?" or "How to do an extraction of DATA in AutoCAD?"....
In this particular case I have a set of production drawings (cut tickets) for manufacturing of stone. And in every single sheet I have this material schedule or a table, if you wish, that is made with an AutoCAD table. In this schedule I have the height, width and thickness of the stone plate and with a function it measures it's area and volume. What I want to do is to extract those values into a reference file that I can open with Microsoft Excel, as I already said.
How exactly?
Any way to label a pipe part way between structures? I would like to be able to label a sanitary line where a service ties in with the main line invert.
C3D 2013
I've placed generic Junction box structures right out of the box from C3D and when I cut a section, the section shows the wrong side of the structure. (Rotated) i.e. An inserted 60”x36” junction box inserted as a curb inlet and then rotated into position will display the 60” side even though it’s perpendicular to the section line.
I've had to go back and place a 36”x60” to get it to display the 36” side in section? Why is there a “rotation handle” on the structure if you can’t really rotate it?I really don't want to swap all 60"x36" with 36"x60" structures just so they will display properly in section.
I am labeling structures in a network on the profile view. I cannot get the leader when i drag the label to anchor to the top of the structure? Is there a way to do this, i figured out how to have the label insert at the middle of the top line of the structure.
Civil 2014-Infrastructure Design Suite
Windows 7 Professional-SP 1-64 bit system
Intel Core i5-2500K cpu @ 3.3ghz
NVIDIA GeForce GT 430
8.0 gb ram
Seems to happen randomply, but my structures and labels disappear when synchronizing.
View 7 Replies View RelatedI have set the migration defaults to my part list and the pipes come in as expected but all the structures come in as null? I even went as far as setting every option to my rect junction NF and they still come in as null?
View 2 Replies View RelatedI have added a pipe network to my profile view and for some reason the structures do not extend down to the inverts of the pipe. So the pipes are lower than the structures. I tried changing the sump, and the rim to sump (rim to sump can be editted but immediately goes back to what it originally was when you click apply. I've also tried clicking the structure and extending it downwards but it doesn't change. I've tried changing the stye and still have the same issue.
View 4 Replies View Relatedin situation i can draw only a structure only. When i want to draw a pipe-there nothing happens. Is possibly that i erase something in Part builder command?
View 2 Replies View RelatedMy storm drain profiles will not plot the structures if I publish. They plot ok if I use the plot command, but I'd like to be able to publish.
View 4 Replies View RelatedAny way to easily identify what labels structures use? I have a plan and profile drawing drawing with 15 diferent layouts. Another guy worked on it and edited the contents on one of the profile structure labels. So now I'm going to have to go through each layout and looking for what structure labels would have been changed. Typicaly if there is a slight difference in the callout for one structure I'll just edit the label text for that one particular structure.
I would like to select (sweep) all the structures in profile and see which ones would have used this particular label style.
I need to create this linetype for stormwater pipes( please see attachment). Is it a special linetype or a block or ... ???
View 9 Replies View RelatedIs there a way to show the deflection angle between incoming and outgoing pipes in a structure label? Or any label at all, for that matter? I know it can be done with alignments at the PI point, but only in the source drawing.
View 1 Replies View Related
