AutoCAD Civil 3D :: How To Create Tree Point Table - Description Keys

Dec 1, 2012

How would I create a Point Table that would allow me to have Point#, Type, Size in individual columns when I have decription keys that area like this;

GUM 6  to be a 6" GUM.

Is there any way to have the data for the Type in one colum and the size in another?

Win7x64 6gb

View 3 Replies


AutoCAD Civil 3D :: Point / Point Groups & Description Keys Are Gone After Crash

Feb 28, 2013

Civil 3d 2012..I used 3d orbit, it crashed. My points, point groups and newly updated description keys are gone.I have looked at all my backup files etc, and they do not want to display.

View 4 Replies View Related

AutoCAD Civil 3D :: Point Blocks And Description Keys?

Mar 15, 2012

I am trying to set up our templete and I am having issues.  I have set up description keys and such. When I import our survey data all comes in (ie blocks and linework). The problem is when I try to plot the block that are inserted on what appears to be the correct layer they do not plot out.  When I freeze the point layer the block disappears as well. What setting am I missing that will create the blocks according to the description key and keep them on a separate layer like it did in Land Desktop but keep them dynamic? I am not sure if the subscription service covers.

View 9 Replies View Related

AutoCAD Civil 3D :: Points / Symbols / Point Styles And Description Keys

Nov 26, 2013

C3D 2012 SP4
Win7 Pro

 I want my survey symbols to come in on their own layers, separate from the point label. Lets use UPOL as an example: I have a point style UPOL*.  It has assigned to it a block representing the utility pole.The size is set to drawing units, and sized to .1 inches.

                                               The marker is on layer: V-NODE-POLE-SYMB

                                               The label is on layer: V-NODE-POLE

The description key is as follows.  UPOL*

                                                        Style: UPOL*

                                                        Point Label Style: Standard

                                                        Layer: V-NODE-POLE-SYMB

No other parameters have been choosen; scale parameter, fixed scale, or use drawing scale.

Have I done this correctly, to accomplish my task?  I also noticed that I cannot turn the point label off by picking it.  I have to turn the layer off in the layer manager.Should I use the description keys to scale the symbol, instead of the point style?

View 8 Replies View Related

AutoCAD Civil 3D :: How Styles / Point Groups / Description Keys / Layers Collide

Aug 24, 2011

In an effort to firm up my understanding of how styles, point groups, description keys and layers collide, I followed the recommendations of an article. How groups/deskeys function together for layer visibility.

This process of Layer visibility that is supposed to make the program flexible makes it almost impossibly complicated.

View 9 Replies View Related

AutoCAD Civil 3D :: Export Description Keys And Point Style / Labels From 2012 To 2011

Jun 20, 2012

I have been trying to export our 2012 DescKeys with Point Styles and Labels to 2011. How to do this without recreating them all.

View 2 Replies View Related

AutoCAD Civil 3D :: Description Keys Settings

May 5, 2012

For some reason in my base template for field work the "Disable Description Keys" option in Points  Creation is set to "true"

How can make this default to "False" in my template. I've tried changing it and then saving the template again but it reverts to true all of the time. I have to select my points and do apply desc keys whenever I import points.

View 2 Replies View Related

AutoCAD Civil 3D :: Blocks For Description Keys

Jan 10, 2013

Civil 3D Newbie here.

I am making a directory full of the blocks we will use for the description key file to use. My understanding is that all of these blocks (manholes, hydrants, trees...etc) should be on layer "0" and of standard size. Manholes should be about 3' in diameter, transformer pads around 4' square....etc. Essentially, 1 = 1 true scale.

Is this true?

View 1 Replies View Related

AutoCAD Civil 3D :: Using Description Keys With Linework?

Jul 18, 2013

I currently use Leica Viva Smartworks for surveying and it captures the linework codes in its own field, so when I export my CSV file my Descrition comes on with the feature code but the linework code is another field. Is their a way that using the Format field in the description Key that I can get the Full description field to read something like "V-DOMW-PIPE B", which would pull the feature code from the raw descrition field and the begin line code from the Linework field.

View 5 Replies View Related

AutoCAD Civil 3D :: Description Keys With Number

Jun 13, 2012

Creating a format to keep a number following a code.

My code is BCCD#

My format is DFL CC $+

My result now is:

Raw Desc.  BCCD1 B  (Bottom of Concrete Ditch)

Full Desc. DFL B CC  (Ditch Flow Line and Type)

I am attempting to create a key that will create the following full description from the raw description:

Raw Desc.  BCCD1 B  (Bottom of Concrete Ditch)

Full Desc. DFL1 CC  B (Ditch Flow Line and Type)

The reason that I need to change the description is to comply with certain standard codes from an outside entity but I do not wish to change the filed coding that we use in house.  I cannot seem to find a parameter that would allow me to keep the number behind the DFL descriptor

View 3 Replies View Related

AutoCAD Civil 3D :: Description Keys - Rotate Label

Aug 16, 2013

I am hoping to bring my spot shots labels in at a 45 degree angle. I have created this Desc Key Set. For some reason the points are still coming in like this.

I double checked my label style, it is set to object. I double checked the properties where it shows rotation it says property not set. I also tried to use the rotation set to parameter 1 and assigned the point a parameter 1 at 45 D with no success.

View 3 Replies View Related

AutoCAD Civil 3D :: Applying Description Keys To Points

Aug 10, 2012

I have created a custom point import with into Civil 3D 2012. I would like to be able to apply the description keys to the points after I import.

View 6 Replies View Related

AutoCAD Civil 3D :: Import Description Keys From Another Drawing?

Nov 5, 2013

How do I import Description Keys from another drawing. I tried exporting XLM file but I must be missing something. I don't understand what the general menu is. I was able to export but not sure what is next.

View 2 Replies View Related

AutoCAD Civil 3D :: Copying Description Keys-Parent Control?

Dec 5, 2012

I was told that once I set up a description key that I could copy it to save time, especially on DS Keys that have blocks associated with them. Unfortunately this isn't working.

I tried copying the basic DS Key - SWMH* (I right clicked the SWMH* (code) to make a copy of it. I renamed it and, used a different block, changed the layers to zero and saved it as SSMH. I saved it, then it proceeded to change all the characteristics of the SWMH to match the SSMH.

Is there some setting that I'm missing? Is there some parent/child association that I'm missing? I know that I can proceed to create each DS key from scratch but prefer not to.

View 3 Replies View Related

AutoCAD Civil 3D :: Description Keys - How To Get Rid Of Extra 0s In Imported Points

Dec 20, 2012

I have a user that imported srrvey points and after getting all the points in and set up  has discovered that the point over 100 have an extra 0 in between the letter identifer and the point number so instead of A100 he has A0100 ,  there are several hundred point descriptions to change is there a way to get rid of all the extra 0's without editing each one.

View 3 Replies View Related

AutoCAD Civil 3D :: Apply Default Style To Points Not In Description Keys?

Sep 23, 2013

Can I apply a default style to points with a raw description not in the description key sets?

When I import survey points into the drawing my description keys will assign specifed styles (and therefore layers) to descriptions it recognises, and a default style (and layer) to ones it does not recognise.

Then if i change raw descriptions in the drawing I can "Apply description keys" and have the styles and layers change based on the changes I made to the raw description. This is fine for descriptions in the key set.

Can I get Civil3D to apply the default style to points that did have a description that is in the DKS but has now been changed to one that is not? As it works for me now, these points remain unchanged in there layer and style.

Civil3D 2014 - Windows7 64bit

View 6 Replies View Related

AutoCAD Civil 3D :: Exclude Point With No Description?

Mar 13, 2008

Is there a way to exclude points from a point group that have no description?

View 4 Replies View Related

AutoCAD Civil 3D :: Point Description Gets Truncated?

Nov 28, 2012

In LDDT 2009, I was able to describe points like this: STK #32

But in Civil 3D 2013, whenever I use the # symbol, the description gets truncated.  So, using the point description above, it will show up in Civil 3D 2013 as STK rather than STK #32.

Is this a setting or something that I can switch on so that the I can use symbols such as # and - in my point description?

View 6 Replies View Related

AutoCAD Civil 3D :: Append To Cogo Point Description

Jan 4, 2013

I have a couple hundred cogo points with all different descriptions. is there a way to add "use these" to the beginning of all the nodes at once?

View 2 Replies View Related

AutoCAD Civil 3D :: How To Freeze Point Number And Description

Dec 4, 2012

I just received a drawing with a bunch of points in it. One of the layer is called V-ROAD-CNTR-PNTS. Unfortunately, the point number, description, and elevation are all in that same layer. How do I keep just the elevation turned on but turn off the point description and number? When I turn off or freeze the layer V-ROAD-CNTR-PTNS, all three disappear. I just need the elevation showing.

Attached is an image of my screen.

View 5 Replies View Related

AutoCAD Civil 3D :: Point Group Name As Point Table Title

Nov 7, 2012

C3D 2012

Is there a 'property' to use the Point Group Name. I need it in the Point Table Style: Title text like this:

View 4 Replies View Related

AutoCAD Civil 3D :: Line Break In Survey Point Description

Mar 27, 2013

Is there a way to have a multiline point description? For example, in the raw description, i wrote out the text, but I would like to return a line for the parentheses.

Civil 3D 2013
Windows 7 64-bit
Inteel 2.40 GHz 8 GB RAM
Dell T7600

View 2 Replies View Related

AutoCAD Civil 3D :: Survey Database Point Description Length?

Dec 6, 2012

Civil 3D 2013 SP1 (64bit)

When importing an event, my point descriptions are cutoff at 16 characters.

Is there any setting to increase this?

If I have Microsoft Access installed on my computer, can one easily modify the table?

If you can modify the table using Access, can you define a default DB or would I have to redefine the string length within a table everytime I create a DB thru Civil 3D GUI?

View 8 Replies View Related

AutoCAD Civil 3D :: Drawing A Line Object Using Point Description

Oct 17, 2013

How shall I draw  lines into a created surface using raw or full description of ascii file format(COGO)

for example in the imported  file i have points to describe a road center line(CL),or edge of the road(ERD),breaklines(BRKL) and want lines represented by the descriptions to be drawed in the surface  so that i can use the lines as guides in profiles design.I didn't want to use point number which are not serially ,and have tried to use point grouping without any success

The attached file could be of good use.

View 2 Replies View Related

AutoCAD Civil 3D :: Cogo Point Properties Window Description Format Is Forced Lower Case Text?

Nov 29, 2012

Just switched to 2012 from 2010. When I try to edit the description format field in the properties window of a selected cogo point, I can't type in caps, it's all lower case. If I right click and edit the point, I can use capital letters, however. (running C3D 2012 sp4, Win7 64bit, 8GB)

View 2 Replies View Related

AutoCAD Civil 3D :: Point Table In Layout?

Nov 13, 2013

Where should i insert my point tables? In the model or the paper space?

in the paper space it seems that i cannot control the insertion scale?? i set specific letter  height that works fine at the model but in paper every time i create a table I see different size depending on the zoom I have.

View 1 Replies View Related

AutoCAD Civil 3D :: Point Table Title

Mar 12, 2013

When I create multiple tables for different point groups, I cannot change the table title without all the tables changing to that title.  I want each table to have an individual title. 

View 1 Replies View Related

AutoCAD Civil 3D :: Manual Entry In A Point Table

Jul 28, 2011

I'd like the option of manually entering information in one column of my point table.  I can see how to create a blank column with a title, but how do I edit those cells?

In my particular case I use a point label style in my drawing that contains "Full Description":  "PK8", for example.  This works great for displaying my point in the drawing - I DO want the number to appear - but when I want to see it in a table, I just want to see 'PK' in a Description column, next to the (obligatory) 'Point Number' column.  Having the Description column read 'PK8' next to the point number is redundant.  I don't see how I can get this in automatically

View 3 Replies View Related

AutoCAD Civil 3D :: Adding Function In Point Table?

Mar 8, 2012

I'm looking to add a column to my point table that will subtract a fixed number from all my surface elevations. I'm working in 2011 Civil 3D. I've been researching this for the past couple of days and haven't been able to come up with anything solid yet...

View 5 Replies View Related

AutoCAD Civil 3D :: Point Table Information Disappearing

Jun 24, 2013

I have a problem in Civil3d 2013 where at random I'll open up a drawing that previously had a point table created and all the point information has disappeared.  All that remains are the Titles.

View 3 Replies View Related

AutoCAD Civil 3D :: Truncating Coordinates In Point Table

Aug 23, 2013

How to truncate coordinates in a C3D point table?

My situation is that I have ground coordinates that are similar to state plane, but because they are not on the grid, they aren't exactly the same.  I want to display the coordinates without the first two or three numbers, in order that people won't get confused and think that they are on the grid.

C3D - 2014

View 2 Replies View Related

Copyrights 2005-15, All rights reserved