I am hoping to bring my spot shots labels in at a 45 degree angle. I have created this Desc Key Set. For some reason the points are still coming in like this.
I double checked my label style, it is set to object. I double checked the properties where it shows rotation it says property not set. I also tried to use the rotation set to parameter 1 and assigned the point a parameter 1 at 45 D with no success.
For some reason in my base template for field work the "Disable Description Keys" option in Points Creation is set to "true"
How can make this default to "False" in my template. I've tried changing it and then saving the template again but it reverts to true all of the time. I have to select my points and do apply desc keys whenever I import points.
Civil 3D Newbie here.
I am making a directory full of the blocks we will use for the description key file to use. My understanding is that all of these blocks (manholes, hydrants, trees...etc) should be on layer "0" and of standard size. Manholes should be about 3' in diameter, transformer pads around 4' square....etc. Essentially, 1 = 1 true scale.
Is this true?
I currently use Leica Viva Smartworks for surveying and it captures the linework codes in its own field, so when I export my CSV file my Descrition comes on with the feature code but the linework code is another field. Is their a way that using the Format field in the description Key that I can get the Full description field to read something like "V-DOMW-PIPE B", which would pull the feature code from the raw descrition field and the begin line code from the Linework field.
View 5 Replies View RelatedCreating a format to keep a number following a code.
My code is BCCD#
My format is DFL CC $+
My result now is:
Raw Desc. BCCD1 B (Bottom of Concrete Ditch)
Full Desc. DFL B CC (Ditch Flow Line and Type)
I am attempting to create a key that will create the following full description from the raw description:
Raw Desc. BCCD1 B (Bottom of Concrete Ditch)
Full Desc. DFL1 CC B (Ditch Flow Line and Type)
The reason that I need to change the description is to comply with certain standard codes from an outside entity but I do not wish to change the filed coding that we use in house. I cannot seem to find a parameter that would allow me to keep the number behind the DFL descriptor
I have created a custom point import with vb.net into Civil 3D 2012. I would like to be able to apply the description keys to the points after I import.
View 6 Replies View RelatedI am trying to set up our templete and I am having issues. I have set up description keys and such. When I import our survey data all comes in (ie blocks and linework). The problem is when I try to plot the block that are inserted on what appears to be the correct layer they do not plot out. When I freeze the point layer the block disappears as well. What setting am I missing that will create the blocks according to the description key and keep them on a separate layer like it did in Land Desktop but keep them dynamic? I am not sure if the subscription service covers.
View 9 Replies View RelatedHow do I import Description Keys from another drawing. I tried exporting XLM file but I must be missing something. I don't understand what the general menu is. I was able to export but not sure what is next.
View 2 Replies View RelatedI was told that once I set up a description key that I could copy it to save time, especially on DS Keys that have blocks associated with them. Unfortunately this isn't working.
I tried copying the basic DS Key - SWMH* (I right clicked the SWMH* (code) to make a copy of it. I renamed it and, used a different block, changed the layers to zero and saved it as SSMH. I saved it, then it proceeded to change all the characteristics of the SWMH to match the SSMH.
Is there some setting that I'm missing? Is there some parent/child association that I'm missing? I know that I can proceed to create each DS key from scratch but prefer not to.
I have a user that imported srrvey points and after getting all the points in and set up has discovered that the point over 100 have an extra 0 in between the letter identifer and the point number so instead of A100 he has A0100 , there are several hundred point descriptions to change is there a way to get rid of all the extra 0's without editing each one.
View 3 Replies View RelatedHow would I create a Point Table that would allow me to have Point#, Type, Size in individual columns when I have decription keys that area like this;
GUM 6 to be a 6" GUM.
Is there any way to have the data for the Type in one colum and the size in another?
C3D12
C3D12-13
Win7x64 6gb
Can I apply a default style to points with a raw description not in the description key sets?
When I import survey points into the drawing my description keys will assign specifed styles (and therefore layers) to descriptions it recognises, and a default style (and layer) to ones it does not recognise.
Then if i change raw descriptions in the drawing I can "Apply description keys" and have the styles and layers change based on the changes I made to the raw description. This is fine for descriptions in the key set.
Can I get Civil3D to apply the default style to points that did have a description that is in the DKS but has now been changed to one that is not? As it works for me now, these points remain unchanged in there layer and style.
Civil3D 2014 - Windows7 64bit
C3D 2012 SP4
Win7 Pro
I want my survey symbols to come in on their own layers, separate from the point label. Lets use UPOL as an example: I have a point style UPOL*. It has assigned to it a block representing the utility pole.The size is set to drawing units, and sized to .1 inches.
The marker is on layer: V-NODE-POLE-SYMB
The label is on layer: V-NODE-POLE
The description key is as follows. UPOL*
Style: UPOL*
Point Label Style: Standard
Layer: V-NODE-POLE-SYMB
No other parameters have been choosen; scale parameter, fixed scale, or use drawing scale.
Have I done this correctly, to accomplish my task? I also noticed that I cannot turn the point label off by picking it. I have to turn the layer off in the layer manager.Should I use the description keys to scale the symbol, instead of the point style?
In an effort to firm up my understanding of how styles, point groups, description keys and layers collide, I followed the recommendations of an article. How groups/deskeys function together for layer visibility.
This process of Layer visibility that is supposed to make the program flexible makes it almost impossibly complicated.
I have been trying to export our 2012 DescKeys with Point Styles and Labels to 2011. How to do this without recreating them all.
View 2 Replies View RelatedI set my des. key up like this: However this produces one single line of text with the description "span 0 dia. 0.0 Ht. 0" I want them on 3 separate lines, like the above picture.So I set up a label style With this component...So how I get the parameters $1 $2 $3 to go in the correct label component?
View 9 Replies View RelatedCivil 3d 2012..I used 3d orbit, it crashed. My points, point groups and newly updated description keys are gone.I have looked at all my backup files etc, and they do not want to display.
View 4 Replies View RelatedI have been searching for a way to rotate surface spot elevation labels but have not been able to find a solution to do so. Has this feature been added to 2013 or 14? I do not want to use the point and label styles for my surface elevation, even though these can be rotated. I have several miles of roadway with many horizontal curves and would like the surface labels aligned with and along the centerline. I prefer not to update the spot elevations when the profile is revised.
C3D 2013 (latest updates), 2014 Infrastructure Design Suite
Win 7 Pro, 64-bit
16 GB RAM
we are updating fron LDD 2004 to Civil 3D 2012 needles to say it a huge change. I've got my template almost done I'm just having one problem. With LDD any point that came in with a raw descripitoin not within the description key it would be placed in the current layer with point number, descripton and elevation. How do I make that happen with Civil3D do I have to change my default lable settings? When I import points with a raw description not within my description key it places the point on Layer 0 and only shows the node no point number.
View 2 Replies View RelatedHave a number of std blocks with a single part number located centrally within a circle similar to std grid line coordinates used on architectural plans.
Is there a simple way to set the block up with its part number fixed centrally so that when the block is inserted at different rotation angles the part number always appears central within the circle and upright.
Forget lisp as only have LT.how to centralise the text within an attribute so its always central when block is rotated.
I have successfully been able to rotate the drawing view. rotating the view label.
View 1 Replies View RelatedThe label associated to a grading point when is moved when is moved changes its size automatically and a leader appears. After this happen no control over the grading point and its associate label. refer to the image below.
View 1 Replies View RelatedC3D 2013. We have profile line labels, some of which get manually edited (for example, change the "<[Tangent grade(FP|P2|RN|AP|GC|UN|SD|OF)]>" to a static number such as 0.29%).
However, if you CTRL+Click and select one of these labels and change the style of that one label, then the manual edits are lost and the label reverts back to the default string.
Is there any way to turn this behavior off?
Is there a way to "Edit Label Text" in a Parcel area label? Similar to the way you can edit it in other styles.
View 9 Replies View RelatedI'm trying to label my Profile label stations as raw stations, 20~20 meters, and I'm not being able to adapt the format to STATION 0, STATION 2, without any plus zeros or +, or -, or commas, or anything, as following in the image.
Is there a easy way to do it?
Is there any way to automatically fill in description in iProperties (.idw) from model description?
View 7 Replies View RelatedIs there a way to add descriptions to DS project folders after the fact?
View 9 Replies View RelatedI want to implement the following Key SAN10L....I have tried many codes to accomplish this: SAN*L, SAN##L, SAN?L. The 10 in the code represents a number from 1-99. The "L" is alphabetic. I want to use the survey database to create linework. I have everything setup, but cant get the code to work to generate the linework.
View 4 Replies View RelatedI'm trying to make a description key set for our surveyors and am running into a problem with one description. For an iron rod they will use the description CH*IR 3/8 W/CAP. I cannot get the point to come in using the right point and label styles.
View 5 Replies View RelatedI know the default Description Key Sets can be set in the Properties. If I set the order in our template drawing this does not seem to hold when a new drawing is started with the template. How can I set the default description key for when a new dwg is created from the template?
View 8 Replies View RelatedIs it possible to pin a label to another label ? Or pin a label to an object so that when the first label (or object) is moved, the other moves with it ?
View 2 Replies View Related