How to truncate coordinates in a C3D point table?
My situation is that I have ground coordinates that are similar to state plane, but because they are not on the grid, they aren't exactly the same. I want to display the coordinates without the first two or three numbers, in order that people won't get confused and think that they are on the grid.
C3D - 2014
i am trying to translate a Point coordinates from Paperspce to world coordinates in model space.The code i used in Land2006 worked OK but now in Civil3d 2012 it doesn't!
Private Sub GetPlais_Click()
Dim tmpnt1 As Variant, tmpnt2 As Variant, tmpPnt1 As Variant
Dim lole(0 To 2) As Double, upri(0 To 2) As Double
Dim returnobj As AcadObject
FrmGrid3.Hide
On Error GoTo Eline
ThisDrawing.Utility.GetEntity returnobj, tmpPnt1, "ÅðÝëåîå ôï ViewPort ðïõ èá äçìéïõñãçèåß ï êÜíáâïò!"
If TypeOf returnobj Is IAcadPViewport Then
[code]........
First time importing into 2012-have csv file that I imported. Coordinates land in right spot. Local system-No transformations/State Plane zones attached. When I look at them with tracking everything is okay. When I export the points they are the same I imported.
When I list the points they are way off?
C3D 2012
Is there a 'property' to use the Point Group Name. I need it in the Point Table Style: Title text like this:
I'm designing a road, but I have a trouble how to export coordinates table of sample lines?
I need a table of coordinates X,Y of sample lines.
Apply the transformed utm coordinates to grid coordinates to a structure table. the point tables have a grid coordinate selection but the pipe structure table does not.
View 1 Replies View Relatedi've got a bunch of points that need a coordinate label. my drawing is on a state plane coordinate base but i want the point labels to be on an artificial coordinate base. i basically need to start in the corner of a parking lot at 0,0 and work my way out from there with the coordinates based on that 0,0. Is this a possibility?
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
I'm working on a stream restoration project and we need to determine the x coordinates and corresponding elevations along a stream alignment at certain sample lines. The centerline of the stream's alignment has been created as well as sample lines for cross sections at 50' intervals. We need the coordinates & elevations of each sample line (cross section) exported into an excel/txt document.
For instance, at station 1+00 of the alignment we have a sample line. We need to know to the right and left along that sample line the corresponding elevations and that x coordinate) from the alignment. Primarily, whole contour intervals but more information would be useful as well. I was hoping this could be automatically generated.
how does one go about truncating surface contour elevation labels so they only show up to the tens place on the left side of the decimal (i.e. 50.25 instead of 5150.25)? I tried changing the rounding option under the style edit to "truncate" but that did not appear to change anything...?
View 6 Replies View RelatedI am tryiny to import coordinate file like I have so many times and the Select File box keeps telling me "No point file format match found". I click the proper file format and it shows in the Preview box but the OK box will not go dark so I can clcik on it. The file is a CSv and tried making it a txt with no luck. Using 2012.
View 6 Replies View RelatedWhere should i insert my point tables? In the model or the paper space?
in the paper space it seems that i cannot control the insertion scale?? i set specific letter height that works fine at the model but in paper every time i create a table I see different size depending on the zoom I have.
When I create multiple tables for different point groups, I cannot change the table title without all the tables changing to that title. I want each table to have an individual title.
View 1 Replies View RelatedI'd like the option of manually entering information in one column of my point table. I can see how to create a blank column with a title, but how do I edit those cells?
In my particular case I use a point label style in my drawing that contains "Full Description": "PK8", for example. This works great for displaying my point in the drawing - I DO want the number to appear - but when I want to see it in a table, I just want to see 'PK' in a Description column, next to the (obligatory) 'Point Number' column. Having the Description column read 'PK8' next to the point number is redundant. I don't see how I can get this in automatically
I'm looking to add a column to my point table that will subtract a fixed number from all my surface elevations. I'm working in 2011 Civil 3D. I've been researching this for the past couple of days and haven't been able to come up with anything solid yet...
View 5 Replies View RelatedI have a problem in Civil3d 2013 where at random I'll open up a drawing that previously had a point table created and all the point information has disappeared. All that remains are the Titles.
View 3 Replies View RelatedThis seems like it should be the most stupidly easy thing...but AutoCAD doesn't seem to have a way to do this. I made a point table from a point group. Quick and sweet.
But now I want to change it a little bit, and it's not something I can just do from the table style. So I want to copy it into Excel...and when I try to, hitting paste in Excel ends up just giving me this block image version of the table in Excel. I tried doing TABLE EXPORT but that's only for regular tables.
Inclusion of “point groups” in a table, I wanted to include “point groups” in a table but couldn’t know what is the most appropriate command to accomplish this task.
I tried the “extract data” command (attached) but sounds not to produce the required table.
I'm having issues trying to create a point table. I have used this process before with no problem but now for some reason C3D won't create the table. I get an "NO VALID SELECTION" after selecting the C3D points. Why I'm getting this error? All my points are C3D points and C3D recognizes the points while the POINT TABLE CREATION menu is still visible but once it goes to create the table i get that error message.
View 2 Replies View RelatedI'm working with both Carlson 2012 and Civil 3d 2012 so this could apply to either one.
I have a set of caissons that were shot on separate days, and they started in the middle when they shot them in. I wanted to create a coordinate table, with the points listed from the northernmost point to the southernmost point. I had thought there might be a way to create a table with dynamic input, where I could pick the points as I go along and have the information entered as I pick.
Is there any way to renumber the points via drawing a polyline connecting them, starting with the one I want as #1 and ending with the last one?
How would I create a Point Table that would allow me to have Point#, Type, Size in individual columns when I have decription keys that area like this;
GUM 6 to be a 6" GUM.
Is there any way to have the data for the Type in one colum and the size in another?
C3D12
C3D12-13
Win7x64 6gb
I have been provided with Surveyed Utility Locates along an Existing Roadway. These are provided to show conflicts between the New Storm Sewer System and Existing Utilities such as Water, Sewer, Gas, Elec, etc. The survey however is incomplete as it was prepared a few years ago and the Storm Sewer has just been designed. Yes, I can create points and provide them to the County Surveying department. However, before this is done, I must provide an easily-understood format of the new survey locations to the County Project Management.
To provide a Point Table which references the Surveyed Points' location in reference to the roadway stationing (Alignment). I have attached what the point table is to look like.
I am unable to find the desired data reference in the currently provided data field selection. Am I just missing it or is this a "Wish List" item?
How to insert the point table into paper space rather than model space and creating a mview?
Also, is there a way to add the point style symbol to the table?
I have some data in the form of
point# | X | Y | Desc_1 | Desc_2 | Desc_3 |....... ect
I would like to make an excel table that i can create multiple points from and make that table dynamic, ie if i edit the table the points will change.I would be labeling the points according to the different desc_# in multiple drawings
Is there any way to do this? I have messed with creating a user defined property classification and creating a new point file format, but i want that point file I imported to be dynamic, and if I change values the values will change in all my drawings.
Is there any way to go round an autocad site plan using the ID command and have the coordinates registered automatically to a table in Autocad 2004
View 5 Replies View RelatedI need to draw a table with point number, easting, northing, elevation for a lot of points and need a lisp to read the xl spreadsheet and draw the table.
View 9 Replies View RelatedWhat is the best way to setup Plot Co-Ordinates that have a tag that updates as you move the co-ordinate point and also I would like to schedule these points in a table ..
for e.g. :
Plot A
_______________________
E 123456.789 N 123456.789
I was wondering if there was a way to set a point in autocad LT 08 using coordinates.
View 5 Replies View RelatedIn autocad 8, how could I get the XYZ coordinates of a point, on the drawing. With ID or list command it is possible to get the coordinates of a point, but they would not appear on the drawing the way dimensions do.
View 9 Replies View RelatedMy quick question id for an alternative way of exporting a cluster of points as .shp files and then manipulating the .dbf file in order to create an excel/csv file.
Is there another way of exporting my data as .csv or excel from Map3D?
I use POINTCLOUDINDEX to convert .las file to .pcg file, then I use POINTCLOUDATTACH to add .pcg file to model space.
How can I get the 3d coordinates of points in .pcs files?
I use ObjectARX in .net.
I can't find any Entity types related to pointcloud, should I find in other namespace?
I have a .DWG file and I need to export the coordinates of the points of the profile of the draw. How I can do it with AutoCAD?I specifiy that I have never used autocad.
View 3 Replies View Related