What is the best way to setup Plot Co-Ordinates that have a tag that updates as you move the co-ordinate point and also I would like to schedule these points in a table ..
for e.g. :
Plot A
_______________________
E 123456.789 N 123456.789
So, I'm familiar with creating Property Set data and schedule styles and all, but I am having trouble wrapping my brain around the following, I would love to know how you tackled it in the simplest way possible:
I need to show a schedule for Windows and Doors, that will read the drawing or selection, and list all the door and window types. Now, that is not so bad, but there is a caveat that I can't get past.
We offer two or more Manufacturers for said windows and doors and are being asked to show tags on our floor plans that reference a table that says:
"For window type "1", ship either Manufacturer A - Part No. X, or Manufacturer B - Part No. Y
What I can't wrap my brain around right now is how to get Property Set data to know that "1" means both of those parts, and not one or the other. The way this is supposed to work, is for each of our plans we are to have only the types ("1", "2", etc.) that are currently shown on that plan, and if one of those windows or doors change to a different type, have the schedule update automatically.
I would prefer not to need to write a LISP or Vlisp that does this, but am open to using VBscript in the Property Set Data, I am just unsure of how to write that into a Formula.
Im trying to change the table style formatting and nothing seems to stick. I want to turn the border off in the title cell and only use a thick underline.
I change the schedule cell, save changes to the style and Ive tried saving as a new style but when I reinsert the cell format is gone. Back to the out of the box state.
Also, when I save the OTB style to my new A3 Sheet Keynote style the new style doesnt match what was saved.
Having problem with the monochrome .ctb plot style table not showing up in the plot dialogue for AutoCAD Architecture 2010? Typically it seems to be standard upon install of the software.
View 6 Replies View RelatedI have one drawing per file at model tab. When I need to plot a multiple page file, I use:
Print > Batch Plot.
The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.
Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.
Is there a way to setup vertical alignment of text in a cell for the entire table, when using Table Tool? It is possible for a single cell, but when selecting a table (or multiple cells) this option is not available.
View 5 Replies View RelatedIs there any command in autocad to LINK TEXT TO SCHEDULE TABLE. I have door & windows in my plan I have given attribute numbers to them as per sizes like for
800mm -w1
900mm-w2
1200mm-w3 etc...
I have made window opening schedule table , when ever i add or delete one window form schedule i have to change the order. like if i delete 900mm window schedule will be.
800mm- w1
1200mm- w2 etc....
so I am looking for a command when ever i change my schedule table my attribute numbers should also change.
I'd like to apply a property set to a dimension, tag it, and have the tag display the dimension value. This tag would be remote from the dimension, and on a separate layer, which would remain on when the dimension layer is frozen.
At present, the property set for dimensions appears not to include the dimension value.
I'm trying to setup a table as a template (just in model space) that can be copied and reused several times. I've formatted it how I want it to look and would like to try and copy cells from an excel sheet, keeping the format of the Autocad table. But every time I do it resets the format, font and color. Even when I select the cell and change the color of text in the properties palette, it doesn't change back again? Only when I highlight the actual text and change it in the text editor does it change color. I've even tried locking the format before pasting the excel data. (paste special - autocad entities)
I dont want to change the format in excel as it is auto generated as plain text.
I am having trouble creating custom schedule tags. I have followed the tutorial "to create a schedule tag", but it does not work for me. First off it is not annotative, I created it in 1 to 1 scale and checked the plotting scale to ensure it is 1 to 1.
Also, it creates the block, and I get it into the tool pallet, but when selected, it just inserts a block. I am trying to create a door tag, so when I select it from the tool pallet, it does not ask me to select a door to tag, just inserts the block.
The tag I want to create is very simple, I want to modify the OTTB Door Tag - Project Based, to remove the suffix and center the door number.
The architect has a schedule set up that will schedule his room numbers and names. He draws spaces for each room.
I want to add perimeter and area to this. I copied this room schedule in the tool pallete, renamed it with "trial", added columns for perimeter and area, BUT STILL GET ? FOR VALUES!
I've looked everywhere and it should work. When I look at "properties" of the space it shows area and perimeter, but I can't figure out how to extract the info.
Possible to send attribute data that is in our title block to a schedule that is populated with property set definitions? We are not using the Project Navigator at this time.
View 2 Replies View RelatedI am getting an error message when I am trying to insert a schedule room tag. It does not matter which room tag out of the content browser I select, I get the same message. the message is as follow: "No symbol has been specified for the tag" All of the tags have worked up until today. Nothing has changed that I know of on our network and all of the paths seem to be pointing to the correct directories. We are currently using Architecture 2008. This problem is only coming up with these specific room tags.
View 3 Replies View RelatedI've created a number of spaces, and I want the space name to show up in a Room schedule. Here is a picture of the Properties window with one of my spaces selected. The space name is 'Spanish 2'. see first attachment
I understand I need to add a column to my room schedule that has this value in it. Here is an image from the 'Edit Schedule Table Style' dialog and the 'add column' sub dialog.
see second attachment
which one of this rather lengthy list is the correct one? I've tried all the values that have 'name' in them but all I get is '?' in my schedule. I've attached the file I'm working on. I created the spaces by dragging and dropping from the tool palettes out of the box, and the room schedule the same way.
Is it possible to Justify an entire schedule? It appears that my schedules have an anchor point that is the upper right corner. Is it possible to change it to the upper left corner?
View 3 Replies View RelatedIs subtotaling still impossible with ACA 2014?
Is there a workaround to what I am trying to do? I just want to create a table that has a list of all the spaces sorted by name, give a quantity of the spaces and the combined area of all those spaces in one row of the table.
Roughly:
King 4 2000sf
Queen 2 1000sf
Suite 4 3000sf
My attached schedule gives a row for each space, except that it groups spaces of exact same areas. I want a single row for each room type.
Also, when working with spaces sometimes using Space_Add, Generate I am met with the response that a space already exists and no space can be added. The "phantom" space does not show up in the schedule, thawing all layers does not reveal any space and I've tried all my selection tricks to parse a space from the closed boundary that appears empty.
Is there any way to go round an autocad site plan using the ID command and have the coordinates registered automatically to a table in Autocad 2004
View 5 Replies View RelatedI've got a multi-family building where I'm trying to create a schedule tag that will number walls sequentially in a view drawing. The units are elements that are then brought into a construct and mirrored and rotated as needed.
The first thing I did was to create a Property Set that uses Level and Manual property set that automatically increments to create a property called Unit Number. Then created a tag that will number the units in my building i.e. : 201 202 etc. This works fine.
I then created a Property Set to apply to the walls that uses the Unit Number from the other Property Set along with a Manual Property Set that increments as well to create a wall tag. What I am expecting to get is 201-01, 201-02 etc. What I’m getting is ?-01, ?-02 etc.
I am having a hard time creating a material takeoff schedule in ACA 2011. I can't seem to get it to give me a square footage of any material. I can get the left and right side gross or net square footage.
I created the walls with components and mapped materials to these but I can't seem to get that info in the schedule.
how to get the annotative scale to work with schedule tags.When I use attributes in blocks I draw the attribute definition with a height that I wish it to display in PaperSpace. Then when defining the block I select the annotative scale so that the block and text display correctly in any viewport.
However when I create Scheduling Tags using the Create Tags button on the Annotate/Scheduling tab it shrinks the text by 1/8" as soon as the tag is created. I've made sure that the scales are set to 1:1 when I create it. I guess I can just enlarge the text 8 times before I make the Tag.
I'm having problems in exporting a window schedule from ACA 2010 to Excel. I have Excel 2010 installed on my home computer.
when I try to export I get the message that excel application may need to be loaded.
I'm using ACA2013. I've been working on making a couple of custom schedule tags and have found what seems to be a bit of a glitch. I have the annotative scale set to 1'-0"=1'-0". Once I have the desired linework and attributes created, I have used the 'create tag wizard'. Once that is finished, the tag is inserted at a much smaller size than the linework I used - 1/10.6666. If I scale the linework and attribute text size by 10-2/3 prior to using the 'wizard' then the tag is created the correct size. Is there something I'm doing incorrectly or is that a glitch in ACA2013?
View 6 Replies View RelatedI need to make the door schedule have the room name in it. I am using the project based door tag so it is already numbered like the room tag.
View 2 Replies View Relatedwhen creating a schedule with a simple formula column (e.g : [QUANTITY]*Width), the formula column total doesn't add the formula results for a grand total. The total shown is the addition of Width of element.If I try and enable "Apply formula to totals", the total is : total quantity*total width instead of just a simple addition of formula resulting values.
For example:
I have 4 windows of 2 different styles.Two windows have a width of 2 meters, the other 2 windows have a width of 3 meters. I want to find out, my total window width, of all window styles.Therefore, i make a schedule with the following columns: QUANTITY, WIDTH and TOTAL WIDTH. The total width column is a formula column (Quantity*Width). The total of the formula column (Quantity*Width) doesn't add the resulting values (2*2+3*2=10), it only adds the simple widths without multiplication with quantity, my result is 5, wich is incorect. If i enable "Apply formula to totals", it multiplies total quantity (4) by total width (5).
I am having a problem with project based door tags getting the *ERROR GETTING VALUE*. I have checked the synchronizations and they are fine. The tags work in all our other projects, just not this one. We are also having some problems with a ? showing up for a space style in the schedule.
View 8 Replies View RelatedI'm having a difficult time finding exactly how I set up the parts list table. I'm thinking that I must have the wrong terminology when searching.
A background on exactly what I am trying to accomplish. I am a cabinet maker and have made the final decision to use Inventor for my design program. I'm taking the self learning method and I get most of it, I feel like I'm on the edge of a breakthrough, but I seem to be stuck on the parts list and getting the information I need.
For a basic example, a shaker door. It has 5 parts; 2 stiles, 2 rails and a flat panel. I need to have the dimensions pop up in the parts list for all my pieces. Just basic length, width, depth, dado, etc. I guess that I felt it would be a piece of cake to configure Inventor, but for the life of me, I cannot find the information I need to go from a part file to shop drawings with dimensions and details.
I also need to make sure that I can get the driven dimensions to show up, since the rails (to the best of my knowledge) have to have driven dimensions. I assume that this is possible.
What I am trying to accomplish is something like what cabinet vision produces for documents. I chose inventor for the flexibility of design since I do some unusual things with cabinetry and cabinet vision just can't handle it.
I am having trouble trying to edit the title fonts in a door schedule. No matter which font I pick under "Edit Schedule Table Style" after a selection of the schedule and right clik, the title font will not change. The listed doors font does change. Is it not poosible to change the title and descriptor font?
View 1 Replies View RelatedI have the below code where by I can gain access to property sets.
But it doesn't look like the Schedule Styles are there.
How can I change this up to get access to Schedule Styles defined in the drawing?
(setq acadObj (vlax-get-acad-object)
schedApp (vla-getInterfaceObject
acadObj
"AecX.AecScheduleApplication.7.0"
)
)
I am creating a schedule to pick up the room areas and additional information to do with artificial lighting. That bit is the easy bit.
What I am trying to do is put a column in the schedule that shows how many light points are within that particular space. I have looked into ticking the quantity box, but that picks up just the spaces. If there was a way that this could be used to pick up the blocks in a particular space, and not the spaces that would be the simplest way to solve this (I think anyway).
Just to let you know, I am using Dynamic Blocks for the light fittings. As I can have all the different types within the one block. I have heard that I can do this using the MultiView blocks (I haven't explored this yet), but the amount of blocks that I need is going to be increased (from what I know about MultiView blocks). The simpler this is, the better I believe.
I have tried using Count under the Automaitc Property, but when used, adds the blocks as an extra row, not into the desired column. I may have to add something to the block to get it to do what I want it to do, but don't know how to do this. At the moment, I am putting this information manually into the space properties.
The next part to my question, and again, I maybe asking a bit too much here, but I want to take two totals from two different columns to create an average. If I could do this in the one table, fantastic! If I have to create a second schedule to pick this up, that is ok I suppose, but I would then do the math for it manually and just write it in if that was the case.
I'm using ACA 13
How to truncate coordinates in a C3D point table?
My situation is that I have ground coordinates that are similar to state plane, but because they are not on the grid, they aren't exactly the same. I want to display the coordinates without the first two or three numbers, in order that people won't get confused and think that they are on the grid.
C3D - 2014
I am new to AutoCAD. I have a csv file that has all my GPS co-ordinates and i want to plot my points and traice plots on my dwg which also has my google earth image.
View 9 Replies View Related