My quick question id for an alternative way of exporting a cluster of points as .shp files and then manipulating the .dbf file in order to create an excel/csv file.
Is there another way of exporting my data as .csv or excel from Map3D?
I have a .DWG file and I need to export the coordinates of the points of the profile of the draw. How I can do it with AutoCAD?I specifiy that I have never used autocad.
View 3 Replies View RelatedI'm working on a stream restoration project and we need to determine the x coordinates and corresponding elevations along a stream alignment at certain sample lines. The centerline of the stream's alignment has been created as well as sample lines for cross sections at 50' intervals. We need the coordinates & elevations of each sample line (cross section) exported into an excel/txt document.
For instance, at station 1+00 of the alignment we have a sample line. We need to know to the right and left along that sample line the corresponding elevations and that x coordinate) from the alignment. Primarily, whole contour intervals but more information would be useful as well. I was hoping this could be automatically generated.
i am trying to translate a Point coordinates from Paperspce to world coordinates in model space.The code i used in Land2006 worked OK but now in Civil3d 2012 it doesn't!
Private Sub GetPlais_Click()
Dim tmpnt1 As Variant, tmpnt2 As Variant, tmpPnt1 As Variant
Dim lole(0 To 2) As Double, upri(0 To 2) As Double
Dim returnobj As AcadObject
FrmGrid3.Hide
On Error GoTo Eline
ThisDrawing.Utility.GetEntity returnobj, tmpPnt1, "ÅðÝëåîå ôï ViewPort ðïõ èá äçìéïõñãçèåß ï êÜíáâïò!"
If TypeOf returnobj Is IAcadPViewport Then
[code]........
First time importing into 2012-have csv file that I imported. Coordinates land in right spot. Local system-No transformations/State Plane zones attached. When I look at them with tracking everything is okay. When I export the points they are the same I imported.
When I list the points they are way off?
I was wondering if there was a way to set a point in autocad LT 08 using coordinates.
View 5 Replies View RelatedIn autocad 8, how could I get the XYZ coordinates of a point, on the drawing. With ID or list command it is possible to get the coordinates of a point, but they would not appear on the drawing the way dimensions do.
View 9 Replies View RelatedI use POINTCLOUDINDEX to convert .las file to .pcg file, then I use POINTCLOUDATTACH to add .pcg file to model space.
How can I get the 3d coordinates of points in .pcs files?
I use ObjectARX in .net.
I can't find any Entity types related to pointcloud, should I find in other namespace?
is there a function in autocad that can display the coordinates of a point...like when we use linear dimension lengthe of line is displayed..
View 4 Replies View Relatedi've got a bunch of points that need a coordinate label. my drawing is on a state plane coordinate base but i want the point labels to be on an artificial coordinate base. i basically need to start in the corner of a parking lot at 0,0 and work my way out from there with the coordinates based on that 0,0. Is this a possibility?
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
I have a drawing which consists of lines and blocks. I need to write down the (x,y) coordinates of each point of my interest. I expect results to be copy-paste'able, text or plain text preferred.
How should I do that? I guess there is a build-in command for this, I fail to Google it though.
How to truncate coordinates in a C3D point table?
My situation is that I have ground coordinates that are similar to state plane, but because they are not on the grid, they aren't exactly the same. I want to display the coordinates without the first two or three numbers, in order that people won't get confused and think that they are on the grid.
C3D - 2014
I have a problem with absolute and relative coordinate regarding drawing an arc.
From my previous studies, I thought whenever I input coordinates in command line, in order to use absolute coordinates I just enter them. If I want to use relative coord, then I can prefix them with @ sign.
For an arc I input as follows: start point: 0,0 2nd point: 500,500 end point: 1000,0. I was expecting to get a half circle from origin to 1000,0 point but to my surprise I find out that CAD gets the input coordinates as relative.
Am I missing something? 1.dwg1.jpg Is this behavior same for all other object drawings?
A way to automatically output a point into a table. For instance having a table searching for a specific block reference or point inside a block or external reference and submitting this into a table with x,y coordinates?
I make a lot of civil drawings and sometime i need to list up relevant coordinates. In stead of manually plotting these in a table i would like to list them up automatically.
Having trouble recently with tracking,For example if i start the line tool, and track from a point, i am given absolute coordinates instead of relative coordinates from that initial point. Absolute coordinates are not much useful to me, I want to be able to start a line at a certain distance from another point.
View 1 Replies View RelatedI would like to display East and West coordinates at certain points ( like circle center lines etc.). how can i do this so that the display is accurate and readable?
View 4 Replies View RelatedHow can I automatically get point coordinates and show it in drawing. For example I have 100 points and I need to write x and y coordinates right next to the point. (not in table or somewhere else).I guess I need a plugin or smth?
View 3 Replies View RelatedI am trying to annotate a drawing so when i click on a point the X,Y,Z coordinates appear as text, but i don't want a cross to appear where i have clicked the point ( if that makes sense)
I would like for them to appear like this:
x = ........
y = .......
The coordinates would have to show to 3 decimal places.
Also when i have clicked a point is there anyway to get the coords into a excel sheet?
I am looking for a method to export all the GPS coordinates which have been assigned to each point along with the properties of that point to an excel csv.
In our drawings, there are multiple columns and each column has four points and each point has X,Y,Z coordinates. I want to export all this information to an excel sheet.
We are a couple of students just starting at our finale thesis at the university. We got some problems that we can't find a resolution to.
We are going to use Ultramarine MOSES to simulate a ship. We got the drawings as 2d construction lines (.dwg) and 3d (.igs) of the ship, and need all the coordinates, x,y,z of all lines, to the coding in MOSES.
Our problem is to get these coordinates from autocad. We have tried to open the dwg in autocad and use dataextraction to get the coordinates without any sucess. We have also tried the igs without any sucess there as well.
I have a 3D part that produced from an assembly document. (pic.1). How can I take the coordinates of the curve that is designed on the right surface (pic.2) in a .txt or better .xls file ?
That curve I want to draw it in Excel.
We have several AutoCAD drawings with hundreds of block references inserted with imprecise coordinates. Now we need to dimension all elements and need to correct these positions.
I am searching for a routine to round these positions up or down towards a 5mm precision so I don't have to manually move every single block element.
Is there any way to automate the task or do you know any workaround (like inserting the elements into a drawing with poorer unit precision settings)?
I am tryiny to import coordinate file like I have so many times and the Select File box keeps telling me "No point file format match found". I click the proper file format and it shows in the Preview box but the OK box will not go dark so I can clcik on it. The file is a CSv and tried making it a txt with no luck. Using 2012.
View 6 Replies View RelatedHere is the problem; corridor and its surface, etc are designed but there is no "obvious" way to get coordinates in order to layout the road in the field. There is the option to get COGO points from corridor via "create COGO POINTS" / "CREATE GROUND DATA" but this option refers only to points based on baseline in any station of the corridor and not in any station i would like to.
View 5 Replies View RelatedI have a series of Polyface meshes imported from a Revit project.
(If this is doable straight from Revit that'd be good too, but I haven't had any success with that)
If I right click on one and select properties, I can clearly see where each vertex has an X, Y, and Z coordinate. For the purposes of a research project, I'd like to be able to automatically export all these coordinates to any ascii format for input into an algorithm. The dataextraction command does not seem to be capable of this and only exports the number of faces and vertices of each mesh.
I'm looking for a lisp that can list the coordinates of blocks to excel, as well as the block name.
I'm currently working an a drawing with 200+ soil samples for a road design, and I have to check the coordinates with a separate excel list.
I am looking for a method to export all the GPS coordinates which have been assigned to each point along with the properties of that point to an excel csv. In our drawings, there are multiple columns and each column has four points and each point has X,Y,Z coordinates. I want to export all this information to an excel sheet.
View 3 Replies View RelatedAs there is some confusion with the colorspace used with the Sigma SPP software when creating so-called "ProPhoto" 16-bit tiff files for the Merrill-based sensors cameras, and I am contemplating using Lightroom just for LOCA correction, as some seem to imply it works well in comparison to the SPP 5.5.1 equivalent corrections, I'd like to confirm that Lightroom's expectations in terms of photometric interpretation(s).
1) D65 illuminant ==> what are the white point coordinates of Melissa RGB ? (Plankian ?)
2) Gamma ==> is it sRGB or gamma 2.2 or anything else ?
3) Can you elaborate on the metadata (EXIF & tags) used by LightRoom to get the Sigma Merrill SPP 16-bit TIF SPP format photometric data ?
4) What's the closest to Melissa RGB : ERIMM, RIMM or ROMM ?
I'm designing a road, but I have a trouble how to export coordinates table of sample lines?
I need a table of coordinates X,Y of sample lines.
I have a question about exporting layouts into the model space coordinate system. I have a lot of drawings created from view frame and sheet set manager.
Each drawing has its own layout and it needs to be exported into model space. But when I export the layout it places the drawing into 0,0 in model space.
Is there any way to have it placed at the drawings coordinate system, assuming its in CA-VF (California State Plane Zone V, US foot) ?
Can it also be rotated, including title block, if the the viewport has a rotation (if the north arrow is not pointing up)?
We need to export the dwg's into dgn's. Our client uses Microstation v7 and all drawings need to be in that format.
I know v7 is old but what are you going to do.
I’m trying to export from my drawing point X-Y position coordinates to Excel for use in programming a metrology that will measure at these locations.
When I use the EATTEXT command to pull up the data extraction wizard, it will export the positions & extracts the locations to a spreadsheet format. But coordinate numbers I get, seem to be relative to the World USC system & not the origin I align & set in the center.
Yet when I use ID Point, to check positions the coordinates of the points are correct & relative to the center origin. How to get the location coordinates relative to the center USC origin I've located in the center of my part?