AutoCAD Civil 3D :: Translate Point Coordinates From Paperspace To World Coordinates In Modelspace

Jun 18, 2012

i am trying to translate a Point coordinates from Paperspce to world coordinates in model space.The code i used in Land2006 worked OK but now in Civil3d 2012 it doesn't!

Private Sub GetPlais_Click()
Dim tmpnt1 As Variant, tmpnt2 As Variant, tmpPnt1 As Variant
Dim lole(0 To 2) As Double, upri(0 To 2) As Double
Dim returnobj As AcadObject

On Error GoTo Eline
ThisDrawing.Utility.GetEntity returnobj, tmpPnt1, "ÅðÝëåîå ôï ViewPort ðïõ èá äçìéïõñãçèåß ï êÜíáâïò!"
If TypeOf returnobj Is IAcadPViewport Then

View 1 Replies


Revit :: Coordinates To Real World Projection Coordinates?

Aug 15, 2012

The coordinates that we can apply in Revit (project/shared) aren't exactly the same to have real world projection coordinates (WGS84)??
If not how can we convert the revit shared coordinates to real world projection coordinates?

View 1 Replies View Related

AutoCAD Civil 3D :: Coordinates Different Between Point List And Point Tracking?

Feb 6, 2013

First time importing into 2012-have csv file that I imported.  Coordinates land in right spot.   Local system-No transformations/State Plane zones attached.  When I look at them with tracking everything is okay.  When I export the points they are the same I imported.

 When I list the points they are way off?

View 2 Replies View Related

AutoCad :: UCS World Does Not Restore To Original Coordinates

Jun 18, 2012

I want to move our firm to using a UCS that aligns with the viewport.

However my hesitation has always been that World does not seem to restore to the original coordinates.

We do survey drafting and the map grid coordinates are critical and we drop in new survey data over the existing on a regular basis.

I tested it again last week but still I cannot insert new data into the same position even after restoring to World UCS. It is consistently about 1.5 units offset from the correct position.

Am I doing something wrong? Should USC World set it back the identical original coordinates such that I could confidently paste with a 0,0 base point and have geometry by in the correct position.

View 1 Replies View Related

AutoCad :: Moving Site Plan To World Coordinates?

Mar 25, 2013

I have been sent a 2D site plan that is not to World Coordinates. How do I move this plan to the correct World Coordinates?

Using AutoCAD 2011

View 4 Replies View Related

AutoCAD Civil 3D :: Point Label With Coordinates?

May 4, 2012

i've got a bunch of points that need a coordinate label. my drawing is on a state plane coordinate base but i want the point labels to be on an artificial coordinate base. i basically need to start in the corner of a parking lot at 0,0 and work my way out from there with the coordinates based on that 0,0. Is this a possibility?

Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0

View 3 Replies View Related

AutoCAD Civil 3D :: Truncating Coordinates In Point Table

Aug 23, 2013

How to truncate coordinates in a C3D point table?

My situation is that I have ground coordinates that are similar to state plane, but because they are not on the grid, they aren't exactly the same.  I want to display the coordinates without the first two or three numbers, in order that people won't get confused and think that they are on the grid.

C3D - 2014

View 2 Replies View Related

Maya Animation :: AimConstraint In World Coordinates?

Jun 4, 2011

I'm trying to add an aimConstraint between objects that are placed under different transforms, but the problem is, it seems aimConstraints calculate the direction using the target and pointing objects local coordinates, is there someway to make it calculate them using world coordinates instead?

View 1 Replies View Related

AutoCAD Civil 3D :: Export Point Coordinates And Elevations Along Sample Line

Sep 4, 2012

I'm working on a stream restoration project and we need to determine the x coordinates and corresponding elevations along a stream alignment at certain sample lines.  The centerline of the stream's alignment has been created as well as sample lines for cross sections at 50' intervals. We need the coordinates & elevations of each sample line (cross section) exported into an excel/txt document.

For instance, at station 1+00 of the alignment  we have a sample line.  We need to know to the right and left along that sample line the corresponding elevations and that x coordinate) from the alignment.  Primarily, whole contour intervals but more information would be useful as well.  I was hoping this could be automatically generated.

View 5 Replies View Related

After Effects :: How To Expose World Coordinates Of A Linked Object

Dec 16, 2013

Is there a way to expose the world coordinates of a linked object like a null?
When you link an object to another it uses its parent space coordinates or coordinates that are relative to the parent. I really need to know the actual world space coordinates.

View 2 Replies View Related

AutoCAD Civil 3D :: Importing Coordinates And No Point File Format Match Found?

Feb 28, 2013

I am tryiny to import coordinate file like I have so many times and the Select File box keeps telling me "No point file format match found".  I click the proper file format and it shows in the Preview box but the OK box will not go dark so I can clcik on it.   The file is a CSv and tried making it a txt with no luck.   Using 2012.

View 6 Replies View Related

AutoCad :: Converting Northing And Easting Meters Coordinates To Map Coordinates

Aug 21, 2013

I'm a GIS analyst trying to learn Cad. I'd like to place a single point in autocad model space at a specific Northing/Easting position. After reading several forum threads I don't think CAD allows me to change the coordinate system of model space from map coords to northing easting coords, as we can in GIS.

View 5 Replies View Related

AutoCad 2D :: Point With Coordinates

Jan 31, 2012

I was wondering if there was a way to set a point in autocad LT 08 using coordinates.

View 5 Replies View Related

AutoCad :: How To Get XYZ Coordinates Of A Point

Feb 14, 2012

In autocad 8, how could I get the XYZ coordinates of a point, on the drawing. With ID or list command it is possible to get the coordinates of a point, but they would not appear on the drawing the way dimensions do.

View 9 Replies View Related

AutoCAD Map 3D :: Export Point Coordinates As CSV?

May 28, 2013

My quick question id for an alternative way of exporting a cluster of points as .shp files and then manipulating the .dbf file in order to create an excel/csv file.

Is there another way of exporting my data as .csv or excel from Map3D?

View 3 Replies View Related

AutoCAD .NET :: How To Get Coordinates Of Point Cloud

Mar 27, 2012

I use POINTCLOUDINDEX to convert .las file to .pcg file, then I use POINTCLOUDATTACH to add .pcg file to model space.

 How can I get the 3d coordinates of points in .pcs files?

I use ObjectARX in .net.

I can't find any Entity types related to pointcloud, should I find in other namespace?

View 2 Replies View Related

AutoCad :: Export Point Coordinates

Jan 14, 2014

I have a .DWG file and I need to export the coordinates of the points of the profile of the draw. How I can do it with AutoCAD?I specifiy that I have never used autocad.

View 3 Replies View Related

AutoCad :: Display The Coordinates Of A Point?

Mar 11, 2013

is there a function in autocad that can display the coordinates of a when we use linear dimension lengthe of line is displayed..

View 4 Replies View Related

AutoCad :: Write Down X / Y Coordinates Of Each Point Of Intersect

Dec 13, 2011

I have a drawing which consists of lines and blocks. I need to write down the (x,y) coordinates of each point of my interest. I expect results to be copy-paste'able, text or plain text preferred.

How should I do that? I guess there is a build-in command for this, I fail to Google it though.

View 3 Replies View Related

AutoCad :: Arc (start-2nd-end Point) Absolute Or Relative Coordinates?

Sep 5, 2011

I have a problem with absolute and relative coordinate regarding drawing an arc.

From my previous studies, I thought whenever I input coordinates in command line, in order to use absolute coordinates I just enter them. If I want to use relative coord, then I can prefix them with @ sign.

For an arc I input as follows: start point: 0,0 2nd point: 500,500 end point: 1000,0. I was expecting to get a half circle from origin to 1000,0 point but to my surprise I find out that CAD gets the input coordinates as relative.

Am I missing something? 1.dwg1.jpg Is this behavior same for all other object drawings?

View 3 Replies View Related

AutoCAD 2013 :: Output Coordinates Of Point / Block

Dec 19, 2013

A way to automatically output a point into a table. For instance having a table searching for a specific block reference or point inside a block or external reference and submitting this into a table with x,y coordinates?

I make a lot of civil drawings and sometime i need to list up relevant coordinates. In stead of manually plotting these in a table i would like to list them up automatically.

View 2 Replies View Related

AutoCad 2D :: Tracking From First Point With Relative Instead Of Absolute Coordinates

Jun 5, 2013

Having trouble recently with tracking,For example if i start the line tool, and track from a point, i am given absolute coordinates instead of relative coordinates from that initial point. Absolute coordinates are not much useful to me, I want to be able to start a line at a certain distance from another point.

View 1 Replies View Related

AutoCAD 2010 :: Displaying East And West Coordinates At Certain Point

Apr 6, 2010

I would like to display East and West coordinates at certain points ( like circle center lines etc.). how can i do this so that the display is accurate and readable?

View 4 Replies View Related

AutoCAD 2010 :: Automatically Get Point Coordinates And Show It In Drawing?

Jul 12, 2012

How can I automatically get point coordinates and show it in drawing. For example I have 100 points and I need to write x and y coordinates right next to the point. (not in table or somewhere else).I guess I need a plugin or smth?

View 3 Replies View Related

AutoCad :: Annotate Drawing So When Click On Point - X Y Z Coordinates Appear As Text

Jan 18, 2013

I am trying to annotate a drawing so when i click on a point the X,Y,Z coordinates appear as text, but i don't want a cross to appear where i have clicked the point ( if that makes sense)

I would like for them to appear like this:

x = ........
y = .......

The coordinates would have to show to 3 decimal places.

Also when i have clicked a point is there anyway to get the coords into a excel sheet?

View 1 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Rounding Up Block Coordinates (insertion Point)

Sep 2, 2013

We have several AutoCAD drawings with hundreds of block references inserted with imprecise coordinates. Now we need to dimension all elements and need to correct these positions.

I am searching for a routine to round these positions up or down towards a 5mm precision so I don't have to manually move every single block element.

Is there any way to automate the task or do you know any workaround (like inserting the elements into a drawing with poorer unit precision settings)?

View 3 Replies View Related

Lightroom :: What Are White Point Coordinates Of Melissa RGB

May 28, 2013

As there is some confusion with the colorspace used with the Sigma SPP software when creating so-called "ProPhoto" 16-bit tiff files for the Merrill-based sensors cameras, and I am contemplating using Lightroom just for LOCA correction, as some seem to imply it works well in comparison to the SPP 5.5.1 equivalent corrections, I'd like to confirm that Lightroom's expectations in terms of photometric interpretation(s).

1) D65 illuminant ==> what are the white point coordinates of Melissa RGB ? (Plankian ?)
2) Gamma ==> is it sRGB or gamma 2.2 or anything else ?
3) Can you elaborate on the metadata (EXIF & tags) used by LightRoom to get the Sigma Merrill SPP 16-bit TIF SPP format photometric data ?
4) What's the closest to Melissa RGB : ERIMM, RIMM or ROMM ?

View 2 Replies View Related

CorelDRAW X5 :: Cannot Edit Extrusion Vanishing Point Coordinates

Oct 9, 2013

After creating an extrusion, we selected the object sometime later, but are not able to edit the vanishing point coordinates for the extruded object.  Is there a reason we cannot edit this object?

Vanishing point coordinate boxes, on toolbar, are grayed and unavailable.

Anchor for vanishing point on drawing screen is an outline and unavailable.

Object is marked as editable, so editing is not blocked.

Selecting the original text or extruded subgroup object makes no difference.

Extrusion gradient colors are not showing on the extrusion walls.

Have varied the 'Extrusion Type', but the types are hard to discern and don't make a difference in the editability of the object.

View 2 Replies View Related

3ds Max :: Display Coordinates Relative To Last Point When Creating Lines

Sep 30, 2013

I'd like to know the coordinates relative to the last entry when creating lines (splines). When creating splines using the line tool, it would be useful to know the coordinates of my current cursor position relative to the last point in an easy way, so I can draw precisely a long line without having to memorize the coordinates of the last point.

Initially, I thought the 'Keyboard Entry" rollout would show the values that reflect what I'm doing visually, just like the rectangle tool for example, or pretty much any other tool, I don't know why the 'line' tool is different but anyways.

View 1 Replies View Related

Revit :: Insert Point Cloud At Correct Coordinates?

Sep 27, 2012

I have spent the last couple of hours researching posts back to 2008 regarding inserting inserting a point cloud into Revit at the correct coordinates.  I have two files (DXF and PCG) that are in the same coordinate system.  They overlay exactly in AutoCAD.  Why I see posts back to 2008 with no resolutions on this same topic?  Also explain to me why a file indexed in AutoCAD 2013 is not compatable with Revit 2013. 

View 1 Replies View Related

GIMP :: Exporting Coordinates Of Point Created Using Path Tool

Jan 22, 2013

Is there any way to export coordinates of a point created using the paths tool? I'm trying to determine the distance of each of the points in the attached picture from the blue mid line.

View 2 Replies View Related

Copyrights 2005-15, All rights reserved