AutoCAD 2013 :: Export Coordinates From DWG Or IGS?
Jan 17, 2013
We are a couple of students just starting at our finale thesis at the university. We got some problems that we can't find a resolution to.
We are going to use Ultramarine MOSES to simulate a ship. We got the drawings as 2d construction lines (.dwg) and 3d (.igs) of the ship, and need all the coordinates, x,y,z of all lines, to the coding in MOSES.
Our problem is to get these coordinates from autocad. We have tried to open the dwg in autocad and use dataextraction to get the coordinates without any sucess. We have also tried the igs without any sucess there as well.
View 3 Replies
ADVERTISEMENT
Dec 7, 2013
I am looking for a method to export all the GPS coordinates which have been assigned to each point along with the properties of that point to an excel csv.
In our drawings, there are multiple columns and each column has four points and each point has X,Y,Z coordinates. I want to export all this information to an excel sheet.
View 3 Replies
View Related
Feb 14, 2013
I have a 3D part that produced from an assembly document. (pic.1). How can I take the coordinates of the curve that is designed on the right surface (pic.2) in a .txt or better .xls file ?
That curve I want to draw it in Excel.
View 2 Replies
View Related
May 28, 2013
My quick question id for an alternative way of exporting a cluster of points as .shp files and then manipulating the .dbf file in order to create an excel/csv file.
Is there another way of exporting my data as .csv or excel from Map3D?
View 3 Replies
View Related
Jan 14, 2014
I have a .DWG file and I need to export the coordinates of the points of the profile of the draw. How I can do it with AutoCAD?I specifiy that I have never used autocad.
View 3 Replies
View Related
Feb 24, 2013
Here is the problem; corridor and its surface, etc are designed but there is no "obvious" way to get coordinates in order to layout the road in the field. There is the option to get COGO points from corridor via "create COGO POINTS" / "CREATE GROUND DATA" but this option refers only to points based on baseline in any station of the corridor and not in any station i would like to.
View 5 Replies
View Related
Oct 26, 2011
I have a series of Polyface meshes imported from a Revit project.
(If this is doable straight from Revit that'd be good too, but I haven't had any success with that)
If I right click on one and select properties, I can clearly see where each vertex has an X, Y, and Z coordinate. For the purposes of a research project, I'd like to be able to automatically export all these coordinates to any ascii format for input into an algorithm. The dataextraction command does not seem to be capable of this and only exports the number of faces and vertices of each mesh.
View 0 Replies
View Related
Mar 21, 2012
I'm looking for a lisp that can list the coordinates of blocks to excel, as well as the block name.
I'm currently working an a drawing with 200+ soil samples for a road design, and I have to check the coordinates with a separate excel list.
View 1 Replies
View Related
Dec 7, 2013
I am looking for a method to export all the GPS coordinates which have been assigned to each point along with the properties of that point to an excel csv. In our drawings, there are multiple columns and each column has four points and each point has X,Y,Z coordinates. I want to export all this information to an excel sheet.
View 3 Replies
View Related
Apr 15, 2012
I'm designing a road, but I have a trouble how to export coordinates table of sample lines?
I need a table of coordinates X,Y of sample lines.
View 9 Replies
View Related
Nov 23, 2012
I have a question about exporting layouts into the model space coordinate system. I have a lot of drawings created from view frame and sheet set manager.
Each drawing has its own layout and it needs to be exported into model space. But when I export the layout it places the drawing into 0,0 in model space.
Is there any way to have it placed at the drawings coordinate system, assuming its in CA-VF (California State Plane Zone V, US foot) ?
Can it also be rotated, including title block, if the the viewport has a rotation (if the north arrow is not pointing up)?
We need to export the dwg's into dgn's. Our client uses Microstation v7 and all drawings need to be in that format.
I know v7 is old but what are you going to do.
View 9 Replies
View Related
Jul 31, 2012
I’m trying to export from my drawing point X-Y position coordinates to Excel for use in programming a metrology that will measure at these locations.
When I use the EATTEXT command to pull up the data extraction wizard, it will export the positions & extracts the locations to a spreadsheet format. But coordinate numbers I get, seem to be relative to the World USC system & not the origin I align & set in the center.
Yet when I use ID Point, to check positions the coordinates of the points are correct & relative to the center origin. How to get the location coordinates relative to the center USC origin I've located in the center of my part?
View 9 Replies
View Related
Sep 4, 2012
I'm working on a stream restoration project and we need to determine the x coordinates and corresponding elevations along a stream alignment at certain sample lines. The centerline of the stream's alignment has been created as well as sample lines for cross sections at 50' intervals. We need the coordinates & elevations of each sample line (cross section) exported into an excel/txt document.
For instance, at station 1+00 of the alignment we have a sample line. We need to know to the right and left along that sample line the corresponding elevations and that x coordinate) from the alignment. Primarily, whole contour intervals but more information would be useful as well. I was hoping this could be automatically generated.
View 5 Replies
View Related
Jul 11, 2013
I am extracting the data form my blocks in CSV file with the dataextraction function, but the problem is that my block is located at lets say X,Y(10,10) and in the CSV table shows X,Y(40000,40000).
View 8 Replies
View Related
May 24, 2013
I am just starting learning lisp, And I am looking for a fast way to select multiple objects (usually circle) and export their coordinates and ID into a excel sheet through lisp programming.
As you might see in the attached drawing, the red circles are objects wanted. I have been trying to export their coordinates as well as their IDs in grids, e.g D28, Easting: Northing: . I still haven't found a good way to export ID for each circle.
As my code doesn't work, I wonder what's the most effective way to detect errors in lisp
View 5 Replies
View Related
May 8, 2012
I'm trying to build a VBA code in inventor 2010 to export the Center of gravity coordinates (X,Y,Z) from an inventor assembly to an excel sheet.
But I'm not able to get the iproperties for the COG from my assembly.
View 1 Replies
View Related
Sep 9, 2013
I have TXT file with XYZ value from echo sounder. How to import that into Autocad 2013 and generate a 3d mesh?
View 3 Replies
View Related
Apr 30, 2013
How to change the koordinates in a 3D dwg to 2D?
View 9 Replies
View Related
Nov 19, 2013
I have a cad-model in a .dwg file (I have attached the file to this post) and I want to export its x,y - coordinates to excell or a text file. Is there some way I can do that from DWG TrueView? I normally just use Autocad Inventor so if there is a way to export the coordinates from there.
View 6 Replies
View Related
Mar 5, 2013
I am trying to use the command PASTEORIG and it does not work for me in AutoCAD 2013 or Civil 3D 2013. Is this a known issue with a fix or am I missing something here?
I know for the longest time to paste to original cooridinates you had to select an object and right click and paste by using the menu. I also used to create a keyboard shortcut that let me use Ctrl+Shift+V, but now these workarounds do not work either. It echos the command on the command line, but does nothing, not even a returned error.
This is a pretty significant issue when working in the Civil field.
Civil 3D 2013
Windows 7 64-bit
Xeon W3550 3.07 GHz
Nvidia Quadro 4000
12.0 GB RAM
View 9 Replies
View Related
Jul 18, 2013
I just finished a project without using any coordinate system (it shows none), and now i need it to be in ll84 coordinate system. Is there a way to convert it? When i try to do it, the streets go to a random location (in a random longitude and latitude), and even if i move it to the right place it doesnt work, because the scale of the drawing doesnt seem to be right, and i cant manage to fix it.
View 3 Replies
View Related
Jan 9, 2014
How do I get the last input to come up when pressing the up arrow key? Say I'm drawing a line & input @10,10. When I press the up arrow, the coordinates come up. How do I get @10,10 to come up? I've changed it before, but I can't remember how & I can't think of what to search for.
View 2 Replies
View Related
Oct 3, 2013
I am struggling to create absolute coordinates on my autocad. I've done it before and tried on different computers drawing the same shape and it works but for some reason when i enter the points into autocad on my comp a line is created instead of a triangle.
View 6 Replies
View Related
Jul 18, 2013
I have a drawing and I have to show the critical points printing the coordinates in the screen:
Is there a way that AutoCAD create text with the coordinates that I can capture with any (ID for example) command?
View 1 Replies
View Related
Sep 17, 2012
I noticed that relative coordinates are not working in UCS Origin in Autocad 2013.
I used to create an UCS according to a mesh of coordinates (North/East). To do that I first aligned the UCS to the North axis and point the origin to known coordinates (this part is working). Then I created a new UCS using relative coordinates, like "non @ -286200,-7485500".
This relative coordinates entry are not working anymore in this version of Autocad (2013).
View 4 Replies
View Related
Dec 19, 2013
A way to automatically output a point into a table. For instance having a table searching for a specific block reference or point inside a block or external reference and submitting this into a table with x,y coordinates?
I make a lot of civil drawings and sometime i need to list up relevant coordinates. In stead of manually plotting these in a table i would like to list them up automatically.
View 2 Replies
View Related
Jun 2, 2013
I have a static curve in Maya and I would like to export the coordinates of the control points in a file that can be read in Matlab. This operation must be done several times so I would like to do it using a batch file and by making a link between maya and Matlab.How can I do it?
View 1 Replies
View Related
Jan 17, 2014
I did some work with ai and want to export the coordinates of my objects to csv or excel. Is this possible and if yes how?
View 2 Replies
View Related
Dec 24, 2013
I amdrawing in autocad version 2010,,and move to version 2013 end then i open my project in version 2013 Text Coordinates & Description picture can't display after use autocad version 2013,,what happen??
View 1 Replies
View Related
Jul 9, 2013
I have been tasked with trying to create some type of template (or multiple templates, if needed) to convert my coordinates (some having straight lines and some having arcs) into a script file. I will be gathering the coordinates from an excel file then linking them to my script file.
My problem is, I have hundreds of sets of coordinates (all with varying arcs and straight lines and varying order in which arcs and lines are used) in which I'm trying to establish a method to convert to a script file. Also, the total number of lines (arcs and straight) vary. Some have as little as 10 lines and some contain as many as 20 lines total.
I have successfully created a script file using one set of coordinates but can't imagine doing this hundreds of times over. I have attached a PDF file showing an example of the coordinates along with the radii (in some cases there is no radius, therefore must be a straight line) and how I can accomplish this without creating a script file for each and every set of coordinates I have. The example I have is only a small portion of what I am working with.
View 9 Replies
View Related
Oct 1, 2013
To the expert here, I have tank foundation with multi circle column under it. How to create or find in afast way the coordinate of each center of column? Any special command for this?
View 9 Replies
View Related
