I am struggling to create absolute coordinates on my autocad. I've done it before and tried on different computers drawing the same shape and it works but for some reason when i enter the points into autocad on my comp a line is created instead of a triangle.
View 6 RepliesI am still having trouble moving objects to precise coordinates. For instance, the thing I drew may be in the correct position in the x-y plane but I want to move it in the positive z direction a precise number of units. Or move it along the y axis by specifying where I want it to be not how far I want it to move.
I see...just use the tab key.
I have a problem with absolute and relative coordinate regarding drawing an arc.
From my previous studies, I thought whenever I input coordinates in command line, in order to use absolute coordinates I just enter them. If I want to use relative coord, then I can prefix them with @ sign.
For an arc I input as follows: start point: 0,0 2nd point: 500,500 end point: 1000,0. I was expecting to get a half circle from origin to 1000,0 point but to my surprise I find out that CAD gets the input coordinates as relative.
Am I missing something? 1.dwg1.jpg Is this behavior same for all other object drawings?
Having trouble recently with tracking,For example if i start the line tool, and track from a point, i am given absolute coordinates instead of relative coordinates from that initial point. Absolute coordinates are not much useful to me, I want to be able to start a line at a certain distance from another point.
View 1 Replies View RelatedHow to switch Civil 3D back to drawing in absolute coordinates at all times (even during the PLINE command!)? And what would be a good reason for changing the default coordinate entry at the commandline from absolute to relative, anyhow?
View 9 Replies View RelatedI am extracting the data form my blocks in CSV file with the dataextraction function, but the problem is that my block is located at lets say X,Y(10,10) and in the CSV table shows X,Y(40000,40000).
View 8 Replies View RelatedWe are a couple of students just starting at our finale thesis at the university. We got some problems that we can't find a resolution to.
We are going to use Ultramarine MOSES to simulate a ship. We got the drawings as 2d construction lines (.dwg) and 3d (.igs) of the ship, and need all the coordinates, x,y,z of all lines, to the coding in MOSES.
Our problem is to get these coordinates from autocad. We have tried to open the dwg in autocad and use dataextraction to get the coordinates without any sucess. We have also tried the igs without any sucess there as well.
I have TXT file with XYZ value from echo sounder. How to import that into Autocad 2013 and generate a 3d mesh?
View 3 Replies View RelatedHow to change the koordinates in a 3D dwg to 2D?
View 9 Replies View RelatedI have a cad-model in a .dwg file (I have attached the file to this post) and I want to export its x,y - coordinates to excell or a text file. Is there some way I can do that from DWG TrueView? I normally just use Autocad Inventor so if there is a way to export the coordinates from there.
View 6 Replies View RelatedI am trying to use the command PASTEORIG and it does not work for me in AutoCAD 2013 or Civil 3D 2013. Is this a known issue with a fix or am I missing something here?
I know for the longest time to paste to original cooridinates you had to select an object and right click and paste by using the menu. I also used to create a keyboard shortcut that let me use Ctrl+Shift+V, but now these workarounds do not work either. It echos the command on the command line, but does nothing, not even a returned error.
This is a pretty significant issue when working in the Civil field.
Civil 3D 2013
Windows 7 64-bit
Xeon W3550 3.07 GHz
Nvidia Quadro 4000
12.0 GB RAM
I just finished a project without using any coordinate system (it shows none), and now i need it to be in ll84 coordinate system. Is there a way to convert it? When i try to do it, the streets go to a random location (in a random longitude and latitude), and even if i move it to the right place it doesnt work, because the scale of the drawing doesnt seem to be right, and i cant manage to fix it.
View 3 Replies View RelatedHow do I get the last input to come up when pressing the up arrow key? Say I'm drawing a line & input @10,10. When I press the up arrow, the coordinates come up. How do I get @10,10 to come up? I've changed it before, but I can't remember how & I can't think of what to search for.
View 2 Replies View RelatedI have a drawing and I have to show the critical points printing the coordinates in the screen:
Is there a way that AutoCAD create text with the coordinates that I can capture with any (ID for example) command?
I noticed that relative coordinates are not working in UCS Origin in Autocad 2013.
I used to create an UCS according to a mesh of coordinates (North/East). To do that I first aligned the UCS to the North axis and point the origin to known coordinates (this part is working). Then I created a new UCS using relative coordinates, like "non @ -286200,-7485500".
This relative coordinates entry are not working anymore in this version of Autocad (2013).
A way to automatically output a point into a table. For instance having a table searching for a specific block reference or point inside a block or external reference and submitting this into a table with x,y coordinates?
I make a lot of civil drawings and sometime i need to list up relevant coordinates. In stead of manually plotting these in a table i would like to list them up automatically.
I'd like to know the coordinates relative to the last entry when creating lines (splines). When creating splines using the line tool, it would be useful to know the coordinates of my current cursor position relative to the last point in an easy way, so I can draw precisely a long line without having to memorize the coordinates of the last point.
Initially, I thought the 'Keyboard Entry" rollout would show the values that reflect what I'm doing visually, just like the rectangle tool for example, or pretty much any other tool, I don't know why the 'line' tool is different but anyways.
I amdrawing in autocad version 2010,,and move to version 2013 end then i open my project in version 2013 Text Coordinates & Description picture can't display after use autocad version 2013,,what happen??
View 1 Replies View RelatedI have been tasked with trying to create some type of template (or multiple templates, if needed) to convert my coordinates (some having straight lines and some having arcs) into a script file. I will be gathering the coordinates from an excel file then linking them to my script file.
My problem is, I have hundreds of sets of coordinates (all with varying arcs and straight lines and varying order in which arcs and lines are used) in which I'm trying to establish a method to convert to a script file. Also, the total number of lines (arcs and straight) vary. Some have as little as 10 lines and some contain as many as 20 lines total.
I have successfully created a script file using one set of coordinates but can't imagine doing this hundreds of times over. I have attached a PDF file showing an example of the coordinates along with the radii (in some cases there is no radius, therefore must be a straight line) and how I can accomplish this without creating a script file for each and every set of coordinates I have. The example I have is only a small portion of what I am working with.
To the expert here, I have tank foundation with multi circle column under it. How to create or find in afast way the coordinate of each center of column? Any special command for this?
View 9 Replies View RelatedI am using the ALIGN command to overlay two groups of blocks, I'm then using some VBA code to export the coordinates of the blocks to an excel sheet to make comparisons.
The issue I'm having is when I use the ALIGN command the coordinates exported are different to those in the drawing (but only for those moved using the ALIGN command).
I don't get this issue when I use the move, rotate and mirror commands, only ALIGN. What may be causing this?
I have a drawing in CAD (2013) and I am trying to assigned a Geo-coordinate system so I can import it into my ArcMap GIS program with the coordinates assigned to it already. Is there any way of doing this?
View 2 Replies View RelatedI am testing using script files to automate inserting blocks for As-Built drawings. My script files run fine, but AutoCAD is placing the blocks at a location that is different than what the input on the command line shows. For instance, I am placing a block at (6,6), which is reflected in the command line, but the block is actually placed at (6,5.898). The 5.898 does not appear anywhere in my script file, and the command line even shows that (6,6) was entered for the insertion point.
View 4 Replies View RelatedI want to insert or import an image that automatically recognizes my drawing coordinates.If I need to, I can use AUD (as Map 3D).However, my computer has difficulty processing too much data.
View 7 Replies View RelatedI created multiple base views and projected views on drawing (autocad 2014). suddenly when I create base view it doesn't show anything, jumps to 0,0,0 coordinates (it is fixed can't be changed), scale can't be changed. It shows it is drawing view in properties, however when I want to edit (click edit then select the view , it won't recognize it is view). I created many views without problem, now all base views jumps to 0,0,0 coordinates....
(pic 1 )- shows the usless view
pic 2 - shows previous view without any issues
i am trying to translate a Point coordinates from Paperspce to world coordinates in model space.The code i used in Land2006 worked OK but now in Civil3d 2012 it doesn't!
Private Sub GetPlais_Click()
Dim tmpnt1 As Variant, tmpnt2 As Variant, tmpPnt1 As Variant
Dim lole(0 To 2) As Double, upri(0 To 2) As Double
Dim returnobj As AcadObject
FrmGrid3.Hide
On Error GoTo Eline
ThisDrawing.Utility.GetEntity returnobj, tmpPnt1, "ÅðÝëåîå ôï ViewPort ðïõ èá äçìéïõñãçèåß ï êÜíáâïò!"
If TypeOf returnobj Is IAcadPViewport Then
[code]........
I'm a GIS analyst trying to learn Cad. I'd like to place a single point in autocad model space at a specific Northing/Easting position. After reading several forum threads I don't think CAD allows me to change the coordinate system of model space from map coords to northing easting coords, as we can in GIS.
View 5 Replies View Relatedwhat a saturday night with the drawing ok here is the point when we draw a rectangle, we can see the properties about it (pr ENTER) But i want to see absolute angle value . Or absolute rotation, doesn't matter how to call it.
You can see it for line, but can't for rectangle or polyline.
So I have a lot of 2D drawings (a couple thousand roughly) that I need to go through and shift the objects within to the absolute 0,0 position. That way, when we insert them into a new drawing, everything is centered appropriately and not way off the screen.
Instead of:
Open File > Select Objects > "MOVE" > Specify Basepoint > " * 0 , 0 " > Center View on Newly position Objects > Save File > Close File
... Repeat ...
By way of a LISP routine, or a script that could automatically do the above steps on it's own. Even something that doesn't require me to hit *, then tab, then 0, then tab, then 0 again.
How to convert the format obtained in "CDate" in absolute minutes?
ex:
Command: (rtos (getvar "CDate") 2 4)
The result is:
"20130326.1301"
What I need is:
+01 minuts
+13 hours X 60 = 780 minuts
+26 x 1440 = 37440 minuts
the current time this month is: 38221 minutes
The coordinates that we can apply in Revit (project/shared) aren't exactly the same to have real world projection coordinates (WGS84)??
If not how can we convert the revit shared coordinates to real world projection coordinates?