I have a drawing and I have to show the critical points printing the coordinates in the screen:
Is there a way that AutoCAD create text with the coordinates that I can capture with any (ID for example) command?
I'm here with 2013 SP2 64 bit Build 200 and two screens. Left screen is graphics area, Browser is on the left of right screen. Graphics is ATI Fire Pro V7800 with driver 9.3.3.3000.
In video (zipped MP4) you see a cutout of both screens, think of screens changing at the left of the browser.
Now, in many cases, after doing an operation, the browser is jumping back to the middle of my graphics in the left screen.
I am extracting the data form my blocks in CSV file with the dataextraction function, but the problem is that my block is located at lets say X,Y(10,10) and in the CSV table shows X,Y(40000,40000).
View 8 Replies View RelatedThere's a box, I've set it to 0,0 coords, but it will not stick to the top of the artboard. I've tried align to pixel grid on and off (It would not move off 0.318px when I had align pixel grid on, which confused me too!). When I turn align to pixel grid off the box stays closer to the top, BUT when I export for web it sticks a white line in at the very top of the artwork.
I'm on a macbook pro, retina.
We are a couple of students just starting at our finale thesis at the university. We got some problems that we can't find a resolution to.
We are going to use Ultramarine MOSES to simulate a ship. We got the drawings as 2d construction lines (.dwg) and 3d (.igs) of the ship, and need all the coordinates, x,y,z of all lines, to the coding in MOSES.
Our problem is to get these coordinates from autocad. We have tried to open the dwg in autocad and use dataextraction to get the coordinates without any sucess. We have also tried the igs without any sucess there as well.
I have TXT file with XYZ value from echo sounder. How to import that into Autocad 2013 and generate a 3d mesh?
View 3 Replies View RelatedHow to change the koordinates in a 3D dwg to 2D?
View 9 Replies View RelatedI have a cad-model in a .dwg file (I have attached the file to this post) and I want to export its x,y - coordinates to excell or a text file. Is there some way I can do that from DWG TrueView? I normally just use Autocad Inventor so if there is a way to export the coordinates from there.
View 6 Replies View RelatedI am trying to use the command PASTEORIG and it does not work for me in AutoCAD 2013 or Civil 3D 2013. Is this a known issue with a fix or am I missing something here?
I know for the longest time to paste to original cooridinates you had to select an object and right click and paste by using the menu. I also used to create a keyboard shortcut that let me use Ctrl+Shift+V, but now these workarounds do not work either. It echos the command on the command line, but does nothing, not even a returned error.
This is a pretty significant issue when working in the Civil field.
Civil 3D 2013
Windows 7 64-bit
Xeon W3550 3.07 GHz
Nvidia Quadro 4000
12.0 GB RAM
I just finished a project without using any coordinate system (it shows none), and now i need it to be in ll84 coordinate system. Is there a way to convert it? When i try to do it, the streets go to a random location (in a random longitude and latitude), and even if i move it to the right place it doesnt work, because the scale of the drawing doesnt seem to be right, and i cant manage to fix it.
View 3 Replies View RelatedHow do I get the last input to come up when pressing the up arrow key? Say I'm drawing a line & input @10,10. When I press the up arrow, the coordinates come up. How do I get @10,10 to come up? I've changed it before, but I can't remember how & I can't think of what to search for.
View 2 Replies View RelatedI am struggling to create absolute coordinates on my autocad. I've done it before and tried on different computers drawing the same shape and it works but for some reason when i enter the points into autocad on my comp a line is created instead of a triangle.
View 6 Replies View RelatedI noticed that relative coordinates are not working in UCS Origin in Autocad 2013.
I used to create an UCS according to a mesh of coordinates (North/East). To do that I first aligned the UCS to the North axis and point the origin to known coordinates (this part is working). Then I created a new UCS using relative coordinates, like "non @ -286200,-7485500".
This relative coordinates entry are not working anymore in this version of Autocad (2013).
A way to automatically output a point into a table. For instance having a table searching for a specific block reference or point inside a block or external reference and submitting this into a table with x,y coordinates?
I make a lot of civil drawings and sometime i need to list up relevant coordinates. In stead of manually plotting these in a table i would like to list them up automatically.
I have a drawing with a screen and behind it is an xref drawing. When I print it to our KIP plotter the lines and other items behind the screen do not plot.
Here is how it is setup and what I have tried
The Xref itself is on its own layer and all the layers of the xref are set to a color that has thickness of .0138 and a 35% screen.
The hatch resides in the active drawing and is set to a color that is also .0138 thick but at a 20% screen.
The hatch is a DOT hatch at scale 1, but I have also tried it as a solid hatch
Lines merge is on and needs to be on.
I have made sure that the hatch is sent to the back and that there is no overlapping of data from other sources liek a second hatch or the same data in another xref etc.
I also tried setting the xref layers to another color that is .0256 thick with a 35% screen, but the results where the same. If i change the xref layers to a .0138 thick color with 100% screen, they do print over the hatch then.
I amdrawing in autocad version 2010,,and move to version 2013 end then i open my project in version 2013 Text Coordinates & Description picture can't display after use autocad version 2013,,what happen??
View 1 Replies View RelatedI have been tasked with trying to create some type of template (or multiple templates, if needed) to convert my coordinates (some having straight lines and some having arcs) into a script file. I will be gathering the coordinates from an excel file then linking them to my script file.
My problem is, I have hundreds of sets of coordinates (all with varying arcs and straight lines and varying order in which arcs and lines are used) in which I'm trying to establish a method to convert to a script file. Also, the total number of lines (arcs and straight) vary. Some have as little as 10 lines and some contain as many as 20 lines total.
I have successfully created a script file using one set of coordinates but can't imagine doing this hundreds of times over. I have attached a PDF file showing an example of the coordinates along with the radii (in some cases there is no radius, therefore must be a straight line) and how I can accomplish this without creating a script file for each and every set of coordinates I have. The example I have is only a small portion of what I am working with.
To the expert here, I have tank foundation with multi circle column under it. How to create or find in afast way the coordinate of each center of column? Any special command for this?
View 9 Replies View RelatedI am using the ALIGN command to overlay two groups of blocks, I'm then using some VBA code to export the coordinates of the blocks to an excel sheet to make comparisons.
The issue I'm having is when I use the ALIGN command the coordinates exported are different to those in the drawing (but only for those moved using the ALIGN command).
I don't get this issue when I use the move, rotate and mirror commands, only ALIGN. What may be causing this?
I have a drawing in CAD (2013) and I am trying to assigned a Geo-coordinate system so I can import it into my ArcMap GIS program with the coordinates assigned to it already. Is there any way of doing this?
View 2 Replies View RelatedI am testing using script files to automate inserting blocks for As-Built drawings. My script files run fine, but AutoCAD is placing the blocks at a location that is different than what the input on the command line shows. For instance, I am placing a block at (6,6), which is reflected in the command line, but the block is actually placed at (6,5.898). The 5.898 does not appear anywhere in my script file, and the command line even shows that (6,6) was entered for the insertion point.
View 4 Replies View RelatedI want to insert or import an image that automatically recognizes my drawing coordinates.If I need to, I can use AUD (as Map 3D).However, my computer has difficulty processing too much data.
View 7 Replies View RelatedI created multiple base views and projected views on drawing (autocad 2014). suddenly when I create base view it doesn't show anything, jumps to 0,0,0 coordinates (it is fixed can't be changed), scale can't be changed. It shows it is drawing view in properties, however when I want to edit (click edit then select the view , it won't recognize it is view). I created many views without problem, now all base views jumps to 0,0,0 coordinates....
(pic 1 )- shows the usless view
pic 2 - shows previous view without any issues
Our general manager strongly worries about data security after reading this news. [URL] ..... How we can forbid staff from Saving files into external drives, Printing specific files, Printing screen? We are also in finance field and we are not going to pay for penalty charge due to data loss.
View 6 Replies View Relatedi am trying to translate a Point coordinates from Paperspce to world coordinates in model space.The code i used in Land2006 worked OK but now in Civil3d 2012 it doesn't!
Private Sub GetPlais_Click()
Dim tmpnt1 As Variant, tmpnt2 As Variant, tmpPnt1 As Variant
Dim lole(0 To 2) As Double, upri(0 To 2) As Double
Dim returnobj As AcadObject
FrmGrid3.Hide
On Error GoTo Eline
ThisDrawing.Utility.GetEntity returnobj, tmpPnt1, "ÅðÝëåîå ôï ViewPort ðïõ èá äçìéïõñãçèåß ï êÜíáâïò!"
If TypeOf returnobj Is IAcadPViewport Then
[code]........
I'm a GIS analyst trying to learn Cad. I'd like to place a single point in autocad model space at a specific Northing/Easting position. After reading several forum threads I don't think CAD allows me to change the coordinate system of model space from map coords to northing easting coords, as we can in GIS.
View 5 Replies View RelatedI've been surfing the internet for a screen printing press, and I am not looking to spend a ton a cash on it. All I want to do is make screen prints of B/W photographs, and print them onto canvas. I understand the basic concept of screen printing, but I just want to make sure this one from Dick Blick will do the trick..It's just a one color print press.
View 2 Replies View RelatedI just came across this problem in this version of Autocad 2013. I am trying to print my company logo into a PDF from autocad 2013 and it does but when i go open the PDF file it has lines all over it nothing is solid like the dwg file. i done this in all other versions of Autocad and it printed find to PDF and everythig was solid with no lines all over the PDF.
View 9 Replies View RelatedWhat is the best way to screen print a gradient.
The shirt is 2 colours. Orange and red.
Would you print the whole orange and then do the red separation as a half tone?
I have been printing with an epson [artisan 50] for a long time, always great colors on my pc.
just switched to a mac and latest version of ps cs6 and my prints are not color correct [very muted colors on the print] It is definitely not the printer [prints perfect from otherc applications]
I have tried many of the settings / color management options, but none seem to do the job. Right now I have it set on 'photoshop manages color' and then for printer profile my printer type with correct paper.
I don't know what to do- share their knowledge on color management/printing
I am trying to print a white under base film for my image to screen print on a dark shirt. I read it is best to choke the image so it is a little smaller and the white does not peep through once the color is placed on top. Is there an easy way to create this base image? I am having a hard time copying or duplicating and making it smaller.
View 9 Replies View Related