I have a 3D part that produced from an assembly document. (pic.1). How can I take the coordinates of the curve that is designed on the right surface (pic.2) in a .txt or better .xls file ?
That curve I want to draw it in Excel.
I'm trying to build a VBA code in inventor 2010 to export the Center of gravity coordinates (X,Y,Z) from an inventor assembly to an excel sheet.
But I'm not able to get the iproperties for the COG from my assembly.
I am looking for a method to export all the GPS coordinates which have been assigned to each point along with the properties of that point to an excel csv.
In our drawings, there are multiple columns and each column has four points and each point has X,Y,Z coordinates. I want to export all this information to an excel sheet.
We are a couple of students just starting at our finale thesis at the university. We got some problems that we can't find a resolution to.
We are going to use Ultramarine MOSES to simulate a ship. We got the drawings as 2d construction lines (.dwg) and 3d (.igs) of the ship, and need all the coordinates, x,y,z of all lines, to the coding in MOSES.
Our problem is to get these coordinates from autocad. We have tried to open the dwg in autocad and use dataextraction to get the coordinates without any sucess. We have also tried the igs without any sucess there as well.
My quick question id for an alternative way of exporting a cluster of points as .shp files and then manipulating the .dbf file in order to create an excel/csv file.
Is there another way of exporting my data as .csv or excel from Map3D?
I have a .DWG file and I need to export the coordinates of the points of the profile of the draw. How I can do it with AutoCAD?I specifiy that I have never used autocad.
View 3 Replies View RelatedHere is the problem; corridor and its surface, etc are designed but there is no "obvious" way to get coordinates in order to layout the road in the field. There is the option to get COGO points from corridor via "create COGO POINTS" / "CREATE GROUND DATA" but this option refers only to points based on baseline in any station of the corridor and not in any station i would like to.
View 5 Replies View RelatedI have a series of Polyface meshes imported from a Revit project.
(If this is doable straight from Revit that'd be good too, but I haven't had any success with that)
If I right click on one and select properties, I can clearly see where each vertex has an X, Y, and Z coordinate. For the purposes of a research project, I'd like to be able to automatically export all these coordinates to any ascii format for input into an algorithm. The dataextraction command does not seem to be capable of this and only exports the number of faces and vertices of each mesh.
I'm looking for a lisp that can list the coordinates of blocks to excel, as well as the block name.
I'm currently working an a drawing with 200+ soil samples for a road design, and I have to check the coordinates with a separate excel list.
I am looking for a method to export all the GPS coordinates which have been assigned to each point along with the properties of that point to an excel csv. In our drawings, there are multiple columns and each column has four points and each point has X,Y,Z coordinates. I want to export all this information to an excel sheet.
View 3 Replies View Related I'm designing a road, but I have a trouble how to export coordinates table of sample lines?
I need a table of coordinates X,Y of sample lines.
I have a question about exporting layouts into the model space coordinate system. I have a lot of drawings created from view frame and sheet set manager.
Each drawing has its own layout and it needs to be exported into model space. But when I export the layout it places the drawing into 0,0 in model space.
Is there any way to have it placed at the drawings coordinate system, assuming its in CA-VF (California State Plane Zone V, US foot) ?
Can it also be rotated, including title block, if the the viewport has a rotation (if the north arrow is not pointing up)?
We need to export the dwg's into dgn's. Our client uses Microstation v7 and all drawings need to be in that format.
I know v7 is old but what are you going to do.
I’m trying to export from my drawing point X-Y position coordinates to Excel for use in programming a metrology that will measure at these locations.
When I use the EATTEXT command to pull up the data extraction wizard, it will export the positions & extracts the locations to a spreadsheet format. But coordinate numbers I get, seem to be relative to the World USC system & not the origin I align & set in the center.
Yet when I use ID Point, to check positions the coordinates of the points are correct & relative to the center origin. How to get the location coordinates relative to the center USC origin I've located in the center of my part?
I'm working on a stream restoration project and we need to determine the x coordinates and corresponding elevations along a stream alignment at certain sample lines. The centerline of the stream's alignment has been created as well as sample lines for cross sections at 50' intervals. We need the coordinates & elevations of each sample line (cross section) exported into an excel/txt document.
For instance, at station 1+00 of the alignment we have a sample line. We need to know to the right and left along that sample line the corresponding elevations and that x coordinate) from the alignment. Primarily, whole contour intervals but more information would be useful as well. I was hoping this could be automatically generated.
I am just starting learning lisp, And I am looking for a fast way to select multiple objects (usually circle) and export their coordinates and ID into a excel sheet through lisp programming.
As you might see in the attached drawing, the red circles are objects wanted. I have been trying to export their coordinates as well as their IDs in grids, e.g D28, Easting: Northing: . I still haven't found a good way to export ID for each circle.
As my code doesn't work, I wonder what's the most effective way to detect errors in lisp
I have a static curve in Maya and I would like to export the coordinates of the control points in a file that can be read in Matlab. This operation must be done several times so I would like to do it using a batch file and by making a link between maya and Matlab.How can I do it?
View 1 Replies View RelatedI did some work with ai and want to export the coordinates of my objects to csv or excel. Is this possible and if yes how?
View 2 Replies View Relatedi am trying to translate a Point coordinates from Paperspce to world coordinates in model space.The code i used in Land2006 worked OK but now in Civil3d 2012 it doesn't!
Private Sub GetPlais_Click()
Dim tmpnt1 As Variant, tmpnt2 As Variant, tmpPnt1 As Variant
Dim lole(0 To 2) As Double, upri(0 To 2) As Double
Dim returnobj As AcadObject
FrmGrid3.Hide
On Error GoTo Eline
ThisDrawing.Utility.GetEntity returnobj, tmpPnt1, "ÅðÝëåîå ôï ViewPort ðïõ èá äçìéïõñãçèåß ï êÜíáâïò!"
If TypeOf returnobj Is IAcadPViewport Then
[code]........
I'm a GIS analyst trying to learn Cad. I'd like to place a single point in autocad model space at a specific Northing/Easting position. After reading several forum threads I don't think CAD allows me to change the coordinate system of model space from map coords to northing easting coords, as we can in GIS.
View 5 Replies View RelatedI need to get the dimensions of a lot of centers from parts in a drawing for inspection with a laser tracker.
Is there a way of setting a point from an reference and get a table of the values from the centers I select (x, y and z).
I need to get all the coordinates from the blue and white parts (inside and outside)...
For almost a decade I'm used to AutoCAD standard 3D coordinates display: X to right, Y away and Z straight up. For some reason Inventor is configured differently: X to right, Y straight up and Z toward you.
View 3 Replies View RelatedHow to get coordinates of a workpoint using iLogic.
Config :: Intel (R) Xeon (R) CPU E31245 @ 3.30 GHz, 16.0 GB, 64bit win7
Inventor 2013 and Vault Basic 2013
In Inventor, I want to look for a table called "MS6 Report". If the table exists, I want to get its coordinates, and delete the table. If it doesn't exist, I'd just like to let the user place a table. How can I check if a customtable by this name already exists in the document? Here is what I have so far...
if (aDoc.ActiveSheet.CustomTables.Equals("MS6 Report")){//get table coordinates//delete table }else {userInteract = m_inventorApplication. Command Manager.CreateInteractionEvents();keySelect = userInteract.KeyboardEvents;keySelect.OnKeyDown += new Keyboard EventsSink_ OnKey Down EventHandler(keySelect_OnKeyDown);mouseSelect = userInteract.MouseEvents;mouseSelect.OnMouseDown += new MouseEventsSink_ OnMouse DownEventHandler(Table_Update_Placement); }
The else statement works great. No problems there. How can I find, get coordinates of, and delete a custom table by the name of "MS6 Report"?
How can I change the coordinates directions? You know X to -X or Y to -Y.
View 4 Replies View Related Im doing some pictures for a broschure.
There are several products to render out and I like each product to be viewed in same position.
When i rotated the product in a view i like can I save the position coordinates and set them later in another product?
get the same view position all the time?
Is it possible to pull out the x,y,z coordinates to text file from a inventor part. I am aware about this that it maybe need some programming but what kind of programming Language is the best to use ? is it possible to use the build in programming Language called Ilogic? Or is it better to use some .net? At my work we use PDMS to do plant modelling and we want to use inventor for modelling the machines and doing the workshop drawings ect. And we want to be able to take the inventor part coordinates and transfer them to PDMS because it can model the machines just by coordinates taken from a text fil.
View 1 Replies View RelatedI try to develop a vba code to get the coordonates of each part of an assembly and after export them to an excel file.
I build this :
Public Sub Export_Layout_COG()
If MsgBox("Cette Macro va exporter les coordonnées du COG de chaque layout, continuer ?", vbYesNo) = vbYes Then
Dim RefDoc As Document
Set RefDoc = ThisApplication.ActiveDocument
Refdocdisplayname = RefDoc.DisplayName
[Code]...
The code return an error on the red line, I don't catch why?
The coordinates that we can apply in Revit (project/shared) aren't exactly the same to have real world projection coordinates (WGS84)??
If not how can we convert the revit shared coordinates to real world projection coordinates?
Why is it, when I go to Flat Pattern/export to DXF that everything ends up upside down.I have part where it is important that the correct side is faced upp, (brusched steel).
When i Export it to dxf, it is upside down, and the bruched facefacing down.
My need is to create up to 50 points from the same origin in a three dimensional Cartesian coordinate system but I’d also like to have a labels for each point that show up in the feature tree.
Are there Inventor 2013 plugin (i.e., add-on, 3rd party, AP) to convert a list 3D Cartesian coordinate system locations (i.e., points) to Inventor to work points(x, y, z)?
I found that I cannot create 3D points in the assembly. Is this correct? I did find that an Inventor part may be used to create a 3D sketch that creates points in 3D space. In the past few days, I found two ways to create 3D points within a iPRT; the batch way uses an Excel file but it then does not allow me to name the points in the feature tree. The second way is to create them one at a time but that take way too much time.
Program: Inventor 2012
Type: Sheet Metal Mode
1. Right click my Flat Pattern
2. Select "Export Face As"
I select the option and I do FOUR separate test(2000,2004,2007,2010) and save each on accodingly
part_2000.dxf
part_2004.dxf
part_2007.dxf
part_2010.dxf
when I drag each of them into "AutoCAD 2009 - English Version 2" I get this
Unknown value "AC1024" encountered in drawing version.
Invalid or incomplete DXF input -- drawing discarded.
I understand 2010 not able but the last 3 from before 2009. Am I missing something here??
Inventor 2012