Illustrator :: How To Export Coordinates Of Objects To CSV Or Excel
Jan 17, 2014I did some work with ai and want to export the coordinates of my objects to csv or excel. Is this possible and if yes how?
View 2 Replies
ADVERTISEMENT
AutoCad :: Export Coordinates And Blockname To Excel
Mar 21, 2012I'm looking for a lisp that can list the coordinates of blocks to excel, as well as the block name.
I'm currently working an a drawing with 200+ soil samples for a road design, and I have to check the coordinates with a separate excel list.
AutoCAD Inventor :: Export Center Of Gravity Coordinates (X Y Z) From Assembly To Excel Sheet
May 8, 2012I'm trying to build a VBA code in inventor 2010 to export the Center of gravity coordinates (X,Y,Z) from an inventor assembly to an excel sheet.
But I'm not able to get the iproperties for the COG from my assembly.
AutoCAD Visual LISP / AutoLISP :: Selecting Multiple Objects To Export Their Coordinates And ID
May 24, 2013I am just starting learning lisp, And I am looking for a fast way to select multiple objects (usually circle) and export their coordinates and ID into a excel sheet through lisp programming.
As you might see in the attached drawing, the red circles are objects wanted. I have been trying to export their coordinates as well as their IDs in grids, e.g D28, Easting: Northing: . I still haven't found a good way to export ID for each circle.
As my code doesn't work, I wonder what's the most effective way to detect errors in lisp
Illustrator :: How To Export Excel Chart Into AI Vector Format
Feb 6, 2014I have an MS Word 2011 document with an Excel pie chart embedded.Double-clicking the pie chart will open it in Excel 2011.Copying/pasting the chart into Illustrator CS6 results in an uneditable bit image.
Previously, with Word 2008 and Illustrator CS2, this worked perfectly. Mind you, I had tons of excess empty paths and such to scrape out, but still, after a couple of minutes' scraping, I had an editable .ai file ready to be cleaned up, captions typeset, and colors edited for export to .eps and placement in InDesign
In fact, right now I've had to jump over to my old iBook G4 to open my old copies of Word 2008 and Illustrator CS2 in order to do this so I can get this job out the door.Is there any way at all that I can get an Excel 2011 pie chart into Illustrator CS6 as a vector image?
I've tried the shift-click on "Copy Picture" method, but the pie chart still appears as a bit image, and the text is turned to gibberish. Saving the chart as a pdf returns the same results.
At this point in the project, asking for the raw data set and regenerating the pies in Illustrator isn't an option -- and besides, I've had to do that before. Oh, the pain.
AutoCad :: Take X / Y Coordinates From Excel And Import Them
Feb 20, 2012I am looking for a quick way to take x,y coord. from excel and import them into autocad. I have read something on the MULTIPLE POINT command but every time I go and put the space in between the words it enters in multiple then point. I only have 10 data points but a lot of sets of points.
View 4 Replies View RelatedAutoCad :: Importing Coordinates (or Dimensions) From MS Excel 2007
Mar 26, 2011I am designing a RCC Dam and the shape of the dam is constant and will not change, but the dimensions of this shape are very likely to change depending upon hydraulic analysis.
I have written a program (irrelevant, but I am using MathCad 14) that performs a stability analysis of a RCC Dam (based on elevations from the hydraulic analysis) and then exports the dam dimensions and coordinates to Excel.
I am attempting to then take those coordinates (or dimensions) from Excel to create a 2-D dimensioned drawing of the Dam in AutoCAD.
I have successfully linked the Excel spreadsheet containing these coordinates and dimensions to AutoCad tables in my drawing, but I am having trouble getting AutoCAD to update my drawing as these tables update with different coordinates and dimensions.
I would like to have a drawing that is fully dimensioned (as the shape of the dam will not change), but that will update coordinates and dimensions as I pump out different dam dimensions from my stability analysis.
AutoCad :: How To Extract Pile Coordinates To Excel Or Spreadsheets
Mar 2, 2007how to extract pile coordinates to excel or spreadsheets, or anything that works and is quicker than just individual pile coordinates. i have about 446 piles.
View 9 Replies View RelatedAutoCad :: Transfer Coordinates From Excel 2003 To 2004?
Jan 2, 2007How do I transfer coordinates from excel 2003 to autocad 2004?
View 9 Replies View RelatedIllustrator :: Way To Export Selected Objects
Oct 14, 2009Is there any way to Export Selected Objects in Illustrator? I am working on a website sketch and i will need to include things outside the frame. When i select Export (or save as PDF) even if i have all objects selected i just get the JPG with the A4 paper.
View 4 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Excel Coordinates To Table
Mar 19, 2013I need to draw a table with point number, easting, northing, elevation for a lot of points and need a lisp to read the xl spreadsheet and draw the table.
View 9 Replies View RelatedAutoCAD 2010 :: Excel Data Coordinates To Draw Line?
Feb 20, 2013I want to drawn LINE by excel data to autocad 2010, I have excel file x,y and z coordiates.
I want to draw line to import excel data coordiates to autocad ?
AutoCad 2D :: Draw Multiple Closed Polylines From One List Of Coordinates In Excel
Sep 22, 2011I'm trying to create about 150 cross-sections, each consisting of 9 closed polylines of which I have created the coordinates. My issue is making the list of coordinates create separate polylines instead of one enormous polyline. Any way to setup the columns, perhaps with blank rows, some way of applying ASCII code, etc. to automatically break up these polylines? (even if they aren't closed that's fine, I just need to make the polylines separate.)
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Read Excel File To Insert Text Values At Coordinates
Mar 6, 2013I got a new work and get it done in the next 2 days, but first I need to do this... from a text file (or excel file, I got both) I got 3 columns, 1 one for node number, and 2 other for X and Y coordinates for each node.
So from that file I need to insert into autocad the node numbers as text (using the current style and height) at the point specified by the other two columns, that are the X,Y coordinates which will be the insertion point of text..
3ds Max :: How To Get List Of Objects Along With Their Respective Coordinates
Jun 29, 2012I'm relatively new to 3ds max and for a project I need to be able to get a list of all objects along with their respective coordinates. I've found ways to get the object list, but none of them display the coordinates?
View 2 Replies View RelatedAutoCad 2D :: How To Export GPS Coordinates To CSV
Dec 7, 2013I am looking for a method to export all the GPS coordinates which have been assigned to each point along with the properties of that point to an excel csv.
In our drawings, there are multiple columns and each column has four points and each point has X,Y,Z coordinates. I want to export all this information to an excel sheet.
AutoCad 3D :: Moving Objects To Absolute Coordinates?
May 19, 2013I am still having trouble moving objects to precise coordinates. For instance, the thing I drew may be in the correct position in the x-y plane but I want to move it in the positive z direction a precise number of units. Or move it along the y axis by specifying where I want it to be not how far I want it to move.
I see...just use the tab key.
AutoCAD 2013 :: Export Coordinates From DWG Or IGS?
Jan 17, 2013We are a couple of students just starting at our finale thesis at the university. We got some problems that we can't find a resolution to.
We are going to use Ultramarine MOSES to simulate a ship. We got the drawings as 2d construction lines (.dwg) and 3d (.igs) of the ship, and need all the coordinates, x,y,z of all lines, to the coding in MOSES.
Our problem is to get these coordinates from autocad. We have tried to open the dwg in autocad and use dataextraction to get the coordinates without any sucess. We have also tried the igs without any sucess there as well.
AutoCAD Inventor :: How To Export Coordinates X / Y / Z From IPT To XLS
Feb 14, 2013I have a 3D part that produced from an assembly document. (pic.1). How can I take the coordinates of the curve that is designed on the right surface (pic.2) in a .txt or better .xls file ?
That curve I want to draw it in Excel.
AutoCAD Map 3D :: Export Point Coordinates As CSV?
May 28, 2013My quick question id for an alternative way of exporting a cluster of points as .shp files and then manipulating the .dbf file in order to create an excel/csv file.
Is there another way of exporting my data as .csv or excel from Map3D?
AutoCad :: Export Point Coordinates
Jan 14, 2014I have a .DWG file and I need to export the coordinates of the points of the profile of the draw. How I can do it with AutoCAD?I specifiy that I have never used autocad.
View 3 Replies View RelatedAutoCAD .NET :: Ignore Objects In A Selection Set Based On Coordinates?
Apr 4, 2013I'm working on a command that lets me select polylines on a specific layer, then converts them to 3d solids. I'm having a slight issue where if a polyline has the same start and end coordinates (this happens in some of our drawings), then the command stops and I get an eDegenerateGeometry error. I want to modify my command so that it detects these objects, removes them from the selection set, and then notifies the users of their prescence so they can be removed manually. The last part i think I can handle, however I'm not sure how to modify either my filter or my routine to detect and ignore these objects. I'm assuming that since i'll want to record these objects to later notify the user, that i'd probably want to modify my routine.
using System;using Autodesk.AutoCAD.Runtime;using Autodesk.AutoCAD.ApplicationServices;using Autodesk.AutoCAD.DatabaseServices;using Autodesk.AutoCAD.Geometry;using Autodesk.AutoCAD.EditorInput;using Autodesk.AutoCAD.DataExtraction;using Autodesk.AutoCAD.Colors;using System.Windows.Forms;
[code]...
AutoCAD Civil 3D :: Export Coordinates From A Corridor
Feb 24, 2013Here is the problem; corridor and its surface, etc are designed but there is no "obvious" way to get coordinates in order to layout the road in the field. There is the option to get COGO points from corridor via "create COGO POINTS" / "CREATE GROUND DATA" but this option refers only to points based on baseline in any station of the corridor and not in any station i would like to.
View 5 Replies View RelatedMaya :: Export CVs Coordinates Static Curve?
Jun 2, 2013I have a static curve in Maya and I would like to export the coordinates of the control points in a file that can be read in Matlab. This operation must be done several times so I would like to do it using a batch file and by making a link between maya and Matlab.How can I do it?
View 1 Replies View RelatedAutoCad :: Export Polyface Mesh Coordinates
Oct 26, 2011I have a series of Polyface meshes imported from a Revit project.
(If this is doable straight from Revit that'd be good too, but I haven't had any success with that)
If I right click on one and select properties, I can clearly see where each vertex has an X, Y, and Z coordinate. For the purposes of a research project, I'd like to be able to automatically export all these coordinates to any ascii format for input into an algorithm. The dataextraction command does not seem to be capable of this and only exports the number of faces and vertices of each mesh.
Photoshop :: Way To Enter Exact Position Coordinates ( X / Y) And Dimensions For Objects
Aug 25, 2012Is there any way to enter exact position coordinates ( x, y) and dimensions for objects in P'shop? For example, putting a photo in an exact position and sizing it by other than dragging handles with the mouse?
View 3 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Export GPS Coordinates To CSV?
Dec 7, 2013I am looking for a method to export all the GPS coordinates which have been assigned to each point along with the properties of that point to an excel csv. In our drawings, there are multiple columns and each column has four points and each point has X,Y,Z coordinates. I want to export all this information to an excel sheet.
View 3 Replies View RelatedAutoCAD Civil 3D :: Export Coordinates Table Of Sample Line?
Apr 15, 2012 I'm designing a road, but I have a trouble how to export coordinates table of sample lines?
I need a table of coordinates X,Y of sample lines.
AutoCAD Civil 3D :: Export Layout To Model Space Coordinates
Nov 23, 2012I have a question about exporting layouts into the model space coordinate system. I have a lot of drawings created from view frame and sheet set manager.
Each drawing has its own layout and it needs to be exported into model space. But when I export the layout it places the drawing into 0,0 in model space.
Is there any way to have it placed at the drawings coordinate system, assuming its in CA-VF (California State Plane Zone V, US foot) ?
Can it also be rotated, including title block, if the the viewport has a rotation (if the north arrow is not pointing up)?
We need to export the dwg's into dgn's. Our client uses Microstation v7 and all drawings need to be in that format.
I know v7 is old but what are you going to do.
AutoCad :: Active Linking Objects To Excel?
Feb 1, 2012I need to export the areas of multiple closed polygons to excel and update that excel as soon as the areas change. We've been using an outside contractor who is able to do this using land f/x.
View 2 Replies View RelatedAutoCAD 2010 :: Export Coordinates Of Points To Spreadsheet (relative To Origin)
Jul 31, 2012I’m trying to export from my drawing point X-Y position coordinates to Excel for use in programming a metrology that will measure at these locations.
When I use the EATTEXT command to pull up the data extraction wizard, it will export the positions & extracts the locations to a spreadsheet format. But coordinate numbers I get, seem to be relative to the World USC system & not the origin I align & set in the center.
Yet when I use ID Point, to check positions the coordinates of the points are correct & relative to the center origin. How to get the location coordinates relative to the center USC origin I've located in the center of my part?