Is there any way to enter exact position coordinates ( x, y) and dimensions for objects in P'shop? For example, putting a photo in an exact position and sizing it by other than dragging handles with the mouse?
View 3 RepliesIllustrator CS6 won't let me enter an exact number into the height and width fields. For instance, if I create a circle and enter 9mm into each field, it gets resized to something like 8.993. If I create a square and enter 144mm x 63mm, Illustrator changes it to 144.005 and 62.999.
I have Snap turned off.
Have 2 files open with same dimensions. I have a little number on the first file I would like to copy & paste to the second. I want it in the same exact position on the second file as it appears on the first.
I thought if you dragged the layer from the first file onto the second while holding shift key would do it, but it only places the number on the center of the page.
Is there a way to change the selection position and size by entering the numbers exactly? I find it difficult to make pixel perfect movements and it is tiresome to use the keyboard arrows to do this.
When something is selected, the position and size appear in the bottom left corner. Perhaps clicking on this could bring up a window that would let the user enter exact values.
Originally noticed individuals faces were just slightly elongated on the monitor screen.
Used printer profile template and did not zoom to where you had to scroll up or down, etc. Although smaller than actual size, the entire image fit on the screen. Measured width and height and then calculated to see how far off the image ratio actually was. It was indeed slightly elongated.
Did this on two 17" monitors with different dimensions (Length & Width)and different monitor resolutions. Did this with both Windows XP and Mac Book Pro using the same image in Photoshop CS2 (Win) and CS3 (Mac). The Windows image is slightly more elongated than the Mac. The Mac screen resolution is slightly greater than the Windows. The image on the Mac is less elongated than that of the Windows but nonetheless elongated.
Never noticed until the recent purchase of the Mac.
The XP system prints exactly to scale. Have not yet printed with the Mac.
I've created a FIRE psd image and saved it as a jpg file:
I would now like to use this image. To do this I need to reduce this image to the following precise dimenstions: height: 238, width: 264. I know how to select and trim the image that I want using the Square deselect tool. No problem there. What I don't understand is how can I see the precise dimensions of this new image BEFORE I save it as a new file. Is there a way for me to see these dimensions as I select the image and adjust the selection accordingly?
In the regional settings of my computer I show negative numbers in brackets instead of the minus sign in front of the number.
With these settings, I am unable to enter negative coordinates in my Corel draw. Corel changes them automatically into positive one.
I have to go to control panel - regional settings and set the negative format back to minus, before I am able to enter negative coordinates in Corel.
I cannot enter new dimensions in resizing window. Has been fine up until now, but I can't click in the spaces to change. Am operating Elememts 8
View 1 Replies View Relatedwhat I can do, to maintain project world coordinates at exact place when moving UCS and PLAN.
For ex.I have this project, In witch I'm making house plan on one of those plot, to draw in comfortable position I want to rotate view with UCS.
I type such command UCS/ OBJECT/ pick an object and ENTER, then PLAN/ CURENT and hit enter, now I have comfortable plan position to work with.
The problem of all this, is that when I redo all backwards, coordinates doesn’t correspond to previous places.
I'm creating a logo for a newspaper ad for an attorney. It would be very easy to create by itself, but the damn dimensions keep changing.
Whenever I try and create a new file W 2.646 " x H 2.895 " it changes W to 2.458 " which I DO NOT WANT and the image cannot be used unless the width is correct.
This is really frustrating and I was wondering if there was ANY way I can turn this dumb thing off. I want EXACT dimensions and it keeps changing it.
I am using CorelDraw X4 and I am having problems printing exact sizes. The printer I am using is the HP designjet Z6100 (42 inch). Recently I tried to print a sign that needed to be exactly 17inches but it came out 16.5inches. When I clicked on the image it said that it was 17inches, but does not print correctly.
View 2 Replies View RelatedI am trying to size a simple graphic/logo so that it is a certain number of pixels wide at 300dpi.
For example, I need the image to be 3 inches wide and able to be printed at 300dpi.
How do I specify the exact image dimensions and maintain a DPI of 300?
I have me riding a giant bird with a transparent background, with the pixel dimensions of 3000x3373 and I have a sky picture with the EXACT same dimensions (3000x3373) that I want to use as a background by rearranging the layers, but when I paste the sky background it pasts onto the bird picture at only <10% of the size of the bird picture EVEN THOUGH both images are the EXACT same dimensions.
View 3 Replies View RelatedAfter using autocad for a while, I got some questions i'd like to ask.
1) In my line of work, I have to label the items I draw in every CAD file, multileader is a nice tool to have but how do I keep the styles I make so that it "transfers" over to a new CAD file?
I have to keep making a new style everytime I create a new drawing. I would like for the default style to stay after I edit it.
2) Is there a way or command that lets me scale an object to exact dimensions? For example, I have a 800 by 750 table in my block library, the size I need is 950 by 820, normally I would have to explode it then stretch it manually on the x and y axis, is there a way to scale it up to 950 by 820 through a command?
3) I don't know what I hit, but I can't seem to select multiple objects just by clicking on them anymore, I now have to hold down the SHIFT key. How do I revert this?
I have resized the image in Photoshop CS5 using Perfect Resize. The image dimensions are 20.00 inches x 13.33 inches. In the Lightroom print module, I chose these settings: cell size to 20.00 in x 13.33 in. All the margins are set to 0.00. "Zoom to Fill" is not checked.Page Setup: 17 x 22 paper. Manual - rear-borderless (retain size) .The size printed is 20.5 in x 13.75 in..What should I be doing to get the print size to match the cell size of 20.00 x 13.33?
View 8 Replies View RelatedWhat's the setting to draw dimensions as objects? For some reason it's drawing them as seperate lines, text, etc. and they only show after hitting enter. I've had this problem in the past and i'm not sure what setting does this
View 2 Replies View RelatedIs there a way to dimension in AutoCAD LT?
For example: I draw a line and when I dimension it, it comes up as 9.32, but I want that line to be 5.1. Is there a way to dimension this line? Is there code that I should be familiar with? I need the line to be exact dimensions, not just change the number.
I'm looking to make the jump from Photoshop. Is there a way to position elements/objects/text by coordinates? This is my single biggest gripe with PDN.
View 3 Replies View RelatedI am using 2012 and i would like to enter my dimensions in imperial into a metric drawing with autocad doing an automatic conversion. So let's say i write this:
12'-8-1/2"
Autocad has to take it like that into the metric drawing then, he has to convert this to 3873.5 mm. Is there a code i can put into some autocad file to make this software work like that?
I am having a problem trying to get text to fit to exact dimensions. Here is a link to a graphic representation of the problem I will explain below: [URL] ..........
This is an example of a plaque I'm working on. The red box Q will be a photograph while the black box will be text (represented by the blue lines). I have a specific body of text that needs to fit inside the black box such that the left margin (segment AB) is exactly 1/2 inch from box Q. Further, the text should also be exactly 1/2 inch from box Q at segment BC, such that the top of the text meets this 1/2 inch margin.
I can't make the text fit correctly. If you notice the text line labeled Z, you'll see that the top of the text does not reach the segment BC, meaning that the distance between box Q and the top of the text Z is much greater than 1/2 inch. If this is the case, the picture in box Q will be surrounded by unequal space on the right (AB) as compared to the bottom (BC). Furthermore, the text beginning at point A and the text labeled X also need to reach the exact margins of the black box to meet the exact dimensions of the borders of the final piece.
When I use something like Text > Paragraph Text Frame > Fit Text to Shape, what happens is the line labeled Y clearly sits to low, making the line spacing force line Z too far from segment BC.
I have generated a batch of several thousand drawings, and then realized that my 'Page 3' paper space is positioned over page 2 in the model! Is there a way that I can tell 'Page 3' to change position to co-ordinates of my choosing, using only script, so that I can write a batch program to change them all?
My only other option is to correct the error in the master drawing and generate all the thousands of drawings again, which is why I'm keen to explore alternatives!
I am having some difficulty getting objects to exactly align to another. When I zoom in as much as I can I see that the two objects edges are not exactly aligned to each other on one axis despite having the same co-ordinate values. I am working in meters unit value. I have tried going to millimeter unit setup but I still have the object aligning issue using what seems to be the finest level of movement - 3 millimeters per movement action.
3ds Max 2010 educational license for modelling.
Random objects on my artboard tend to change dimensions and/or coordinates on its own. The difference is by a few thousandth of a decimal. I'm not sure when this happens but it's usually happening to objects I'm not working on in the moment. And once and a while an object would refuse to comply when I try to readjust the dimension or coordinates.
Why this keeps happening and what I can do to stop it?
FYI: I am using CS5 on a Macbook Pro.
I have some serious fight this morning with AutoCAD. I have to dimension my drawings properly so it can be build. I did some already, a few aligned dimensions in an layout snapping on modelspace objects. when i put them all is fine and right dimensions.
BUT after i saved, closed the file and opened it again those dimensions are everywhere exept where i put them originally. And no the modelspace objects are not moved.
How can this be? can i solve this? or is this a know bug for AutoCAD 2012? i can't check all the dimensions before publisching again and again.
How can I draw a horizontal line with specifications:length 100 pxstarting at point x,y : 300,20 px?
View 2 Replies View RelatedI am designing a RCC Dam and the shape of the dam is constant and will not change, but the dimensions of this shape are very likely to change depending upon hydraulic analysis.
I have written a program (irrelevant, but I am using MathCad 14) that performs a stability analysis of a RCC Dam (based on elevations from the hydraulic analysis) and then exports the dam dimensions and coordinates to Excel.
I am attempting to then take those coordinates (or dimensions) from Excel to create a 2-D dimensioned drawing of the Dam in AutoCAD.
I have successfully linked the Excel spreadsheet containing these coordinates and dimensions to AutoCad tables in my drawing, but I am having trouble getting AutoCAD to update my drawing as these tables update with different coordinates and dimensions.
I would like to have a drawing that is fully dimensioned (as the shape of the dam will not change), but that will update coordinates and dimensions as I pump out different dam dimensions from my stability analysis.
I have these problems.
1. when I creat a new object he stays at position 0,0,0 and I only can move when I transform in some editable.
2.this happend when I try to construct bones TOO, and I can create whitohou the zeros point, when I click the bones are creating in same point in viewport.
I all ready try to press x, see the snap toogle, dont like to be an Axis constrain, try to restar to default config.
I'm relatively new to 3ds max and for a project I need to be able to get a list of all objects along with their respective coordinates. I've found ways to get the object list, but none of them display the coordinates?
View 2 Replies View RelatedHow to change position of several objects toward center (let's say all objects have pivot point in one place) ?
View 4 Replies View RelatedI am still having trouble moving objects to precise coordinates. For instance, the thing I drew may be in the correct position in the x-y plane but I want to move it in the positive z direction a precise number of units. Or move it along the y axis by specifying where I want it to be not how far I want it to move.
I see...just use the tab key.
I did some work with ai and want to export the coordinates of my objects to csv or excel. Is this possible and if yes how?
View 2 Replies View Related