Photoshop :: Image Not Exact Dimensions On Monitor
Jan 24, 2009
Originally noticed individuals faces were just slightly elongated on the monitor screen.
Used printer profile template and did not zoom to where you had to scroll up or down, etc. Although smaller than actual size, the entire image fit on the screen. Measured width and height and then calculated to see how far off the image ratio actually was. It was indeed slightly elongated.
Did this on two 17" monitors with different dimensions (Length & Width)and different monitor resolutions. Did this with both Windows XP and Mac Book Pro using the same image in Photoshop CS2 (Win) and CS3 (Mac). The Windows image is slightly more elongated than the Mac. The Mac screen resolution is slightly greater than the Windows. The image on the Mac is less elongated than that of the Windows but nonetheless elongated.
Never noticed until the recent purchase of the Mac.
The XP system prints exactly to scale. Have not yet printed with the Mac.
View 3 Replies
ADVERTISEMENT
May 9, 2004
I've created a FIRE psd image and saved it as a jpg file:
I would now like to use this image. To do this I need to reduce this image to the following precise dimenstions: height: 238, width: 264. I know how to select and trim the image that I want using the Square deselect tool. No problem there. What I don't understand is how can I see the precise dimensions of this new image BEFORE I save it as a new file. Is there a way for me to see these dimensions as I select the image and adjust the selection accordingly?
View 4 Replies
View Related
Oct 17, 2011
I am trying to size a simple graphic/logo so that it is a certain number of pixels wide at 300dpi.
For example, I need the image to be 3 inches wide and able to be printed at 300dpi.
How do I specify the exact image dimensions and maintain a DPI of 300?
View 3 Replies
View Related
Aug 4, 2012
I have resized the image in Photoshop CS5 using Perfect Resize. The image dimensions are 20.00 inches x 13.33 inches. In the Lightroom print module, I chose these settings: cell size to 20.00 in x 13.33 in. All the margins are set to 0.00. "Zoom to Fill" is not checked.Page Setup: 17 x 22 paper. Manual - rear-borderless (retain size) .The size printed is 20.5 in x 13.75 in..What should I be doing to get the print size to match the cell size of 20.00 x 13.33?
View 8 Replies
View Related
Aug 25, 2012
Is there any way to enter exact position coordinates ( x, y) and dimensions for objects in P'shop? For example, putting a photo in an exact position and sizing it by other than dragging handles with the mouse?
View 3 Replies
View Related
Jun 2, 2013
I'm creating a logo for a newspaper ad for an attorney. It would be very easy to create by itself, but the damn dimensions keep changing.
Whenever I try and create a new file W 2.646 " x H 2.895 " it changes W to 2.458 " which I DO NOT WANT and the image cannot be used unless the width is correct.
This is really frustrating and I was wondering if there was ANY way I can turn this dumb thing off. I want EXACT dimensions and it keeps changing it.
View 1 Replies
View Related
Jul 5, 2012
I am using CorelDraw X4 and I am having problems printing exact sizes. The printer I am using is the HP designjet Z6100 (42 inch). Recently I tried to print a sign that needed to be exactly 17inches but it came out 16.5inches. When I clicked on the image it said that it was 17inches, but does not print correctly.
View 2 Replies
View Related
Dec 2, 2012
I have me riding a giant bird with a transparent background, with the pixel dimensions of 3000x3373 and I have a sky picture with the EXACT same dimensions (3000x3373) that I want to use as a background by rearranging the layers, but when I paste the sky background it pasts onto the bird picture at only <10% of the size of the bird picture EVEN THOUGH both images are the EXACT same dimensions.
View 3 Replies
View Related
Jun 22, 2011
After using autocad for a while, I got some questions i'd like to ask.
1) In my line of work, I have to label the items I draw in every CAD file, multileader is a nice tool to have but how do I keep the styles I make so that it "transfers" over to a new CAD file?
I have to keep making a new style everytime I create a new drawing. I would like for the default style to stay after I edit it.
2) Is there a way or command that lets me scale an object to exact dimensions? For example, I have a 800 by 750 table in my block library, the size I need is 950 by 820, normally I would have to explode it then stretch it manually on the x and y axis, is there a way to scale it up to 950 by 820 through a command?
3) I don't know what I hit, but I can't seem to select multiple objects just by clicking on them anymore, I now have to hold down the SHIFT key. How do I revert this?
View 1 Replies
View Related
Nov 2, 2011
Is there a way to dimension in AutoCAD LT?
For example: I draw a line and when I dimension it, it comes up as 9.32, but I want that line to be 5.1. Is there a way to dimension this line? Is there code that I should be familiar with? I need the line to be exact dimensions, not just change the number.
View 8 Replies
View Related
Aug 5, 2011
I am having a problem trying to get text to fit to exact dimensions. Here is a link to a graphic representation of the problem I will explain below: [URL] ..........
This is an example of a plaque I'm working on. The red box Q will be a photograph while the black box will be text (represented by the blue lines). I have a specific body of text that needs to fit inside the black box such that the left margin (segment AB) is exactly 1/2 inch from box Q. Further, the text should also be exactly 1/2 inch from box Q at segment BC, such that the top of the text meets this 1/2 inch margin.
I can't make the text fit correctly. If you notice the text line labeled Z, you'll see that the top of the text does not reach the segment BC, meaning that the distance between box Q and the top of the text Z is much greater than 1/2 inch. If this is the case, the picture in box Q will be surrounded by unequal space on the right (AB) as compared to the bottom (BC). Furthermore, the text beginning at point A and the text labeled X also need to reach the exact margins of the black box to meet the exact dimensions of the borders of the final piece.
When I use something like Text > Paragraph Text Frame > Fit Text to Shape, what happens is the line labeled Y clearly sits to low, making the line spacing force line Z too far from segment BC.
View 5 Replies
View Related
Mar 8, 2012
getting the image in this[URL]....link. I just need the air freshener symbol in the middle, the blue tree. I have been able to kind of get it seperated from the background but it always ends up being a little blurry or fuzzy on the sides. I really need it to be crisp and smooth like it is in blue.
View 5 Replies
View Related
Jan 12, 2004
How can I resize an image without distorting the picture, to exact pixel measurements that I choose?
Like for example, how would I resize an image to 128 pixels, to 160 pixels, while keeping the image quality?
Everytime I resize, it distorts the image.
View 9 Replies
View Related
Jun 17, 2012
When I drag a 3600x3600 px image onto a 3600x3600 px canvas, my image gets placed on the canvas with it's center at 1803,1803 px. So it's off just a tiny bit. When I place an image smaller than 3600x3600 px, it gets placed on the canvas with its center at 1802,1802 px or 1802.5,1802.5 px It's not terribly difficult to center it after it's placed, but I'd rather not spend the 5 seconds or so every time I place an image if I don't have to.
CS5 12.0.4 64bit running on Windows 7 home 64bit
View 8 Replies
View Related
Jul 16, 2008
way to draw a line down the exact center of an image, and possibly make the line look cool. I'm trying to create a custom Magic the Gathering playmat thing for a program for testing decks out.
I tried the line tool, but it doesn't seem to allow you to fill it in with the paintbucket after, or do anything with it for that matter. I just want a cool looking divider.
Then I might create another split into 3 sections vertically for 6v6 battles, any way to measure this out automatically?
View 2 Replies
View Related
Sep 15, 2011
I can create the exact Raven image I want from a photograph he found.However, no matter how I try to fill in the silhouette, no matter what commands I attempt (such as convert to shape), all that happens when I attempt to set fill color as black is that the line changes color. It's as if the line itself is the shape, if that makes sense.
By the way, I originally traced it with a series of lines and then joined them, as I couldn't do this with one continuous line.
I tried converting to shape and then combining and intersecting, subtracting, you name it, using a black shape behind the lines, hoping to get a black Raven image. But to no avail. What do I need to do to fix this? I'm thinking if I retrace it again, I'll likely make the same mistake(s). I searched for a solution in this forum, but "fill" gets a ton of results.
View 7 Replies
View Related
Dec 6, 2012
I want to produce images that are exactly 4" x 6" to use as masters to make 4" x 6" borderless photo prints. I use Resize > Canvas Size > Absolute Size > 4.00 width > 6.00 height. When I save a print the resulting images are not exactly 4" X 6" so they do not produce useful borderless photos. Different photos have produced different size images using those same settings. The only way I have been able to learn that they are not the exact size that I need is to print and measure them.
Is it realistic to expect Paint.net to produce images that are exactly 4" x 6"?
Is there a better way than printing and measuring them to determine that the images are the desired size?
View 8 Replies
View Related
Jan 20, 2012
I am working on tiny comic-strip frames that are being drawn as seperate images and when it comes to colouring, there is a time-consuming snag where I forget the exact colours of the finished frames which I need to keep checking and seeing earlier single images in order to compare and then reproduce the colours accurately in a consistent sequence.
Believe it or not, I get around this problem by taking digital still camera shots direct off the screen and consulting them afterwards! This does work, but it's hardly practical------is there an easier way to repeat the exact same colors on a separate image, without having to constantly refer to pre-existing images within GIMP? If I can reproduce the exact colours on different images automatically without having to recheck earlier images, this would save me a lot of time!
[Ideally, does every shade of colour have a code number or similar method I can enter and it will come up again accurately? This way, I could write down the shade number and repeat it exactly later on a new image where the exact same colour is required.]
The sheer number of shades of colour and tones make it very difficult to remember the exact colours accurately.
View 2 Replies
View Related
Oct 22, 2013
I've taken a photo of a monitor. The monitor is OFF so the screen is black. I want to superimpose another image onto the blacked-out screen, so it looks like the monitor is on and displaying a live image.
Apart from the overlay operation, it's complicated by the fact that the image of the monitor is slightly distorted by perspective, while the inserted image is square.
So I guess this means that I need to perspective-isedistort the second image to match the available space on the monitor image.
I'm not unfamiliar with simple PS operations, but this project is a little outside my range of expertise.
However, I assume that the first step will be to get both images to the same density. The monitor pic is currently at 180 pixelsinch while the pic to be overlaid is 95.987 pixelsinch.
View 6 Replies
View Related
Oct 5, 2012
Heres what I have and my workflow
Windows 7/64
All drivers and software are up to date.
Photos taken with 5D Mark iii in Raw
Developed in Camera Raw
Tweaked in CS6
Color space is 1998 RGB
Saved as jpeg
Using a Lenovo Desktop- Ideacenter B520
Printer is Epson R3000
Monitor and printer are calibrated with Colormunki Photo.In photoshop I softproof using the profile created with colormunki and the image looks excellent.
Whn I print, I choose "photoshop manages colors", and in the printer setting I make sure color management is turned off. The prints look very dull and washed out. I make sure the correct printer profile is chosen (the one created with colormunki for the specific paper I use)
Bust, if using the same image, I choose "Printer manages colors", and then in the printer color management choose "Adobe 1998", the brints look wonderful.What am I doing the is causing Photoshop manages colors to look worse than printer manages colors, when in both cases the image looks great on the monitor?
View 2 Replies
View Related
Apr 7, 2012
How can I find all pixels in an image with an exact, specific color? So far, I've only managed to find the pixels matching a pixel I click on; but I wish to find pixels matching a specific color value!
View 1 Replies
View Related
Jan 16, 2013
Make a current, parent image, pattern step and repeat at an exact distance from the parent.
I have a parent image 4.75"long X 2.00" high image I want the pattern repeated in the Y direction every 2.10" or with a .10" space between the images, to create a 1XN array or tiles or pattern?
I then want to print the new tiled, array image to the exact size.
View 2 Replies
View Related
Jun 7, 2013
I am on mac 10.8 and photoshop CS6. When I drag an image to the second monitor it goes black. When I drag it back to the main monitor it come back. Also on this computer often the cursor (in CS6 only) dissappears. It reappears when I pull the cursor down to the dock.
View 3 Replies
View Related
Oct 11, 2012
What is the best way to get consistent color from one monitor to another. Is that even possible?
View 6 Replies
View Related
Dec 20, 2013
Why can't I drop a clip in the Program Monitor from the Source Monitor in Premiere? When I try to move a clip from the Source to the Program Monitor, a hand displays with the "circle with a line through it" symbol.
View 2 Replies
View Related
Jun 22, 2013
How to have full-screen on both monitor and image adapted to full-screen.
View 3 Replies
View Related
Apr 17, 2014
How can separate Multicam Monitor from Program Monitor? I would like to put Multicam monitor on one monitor and hte Program on another.
View 2 Replies
View Related
Jul 24, 2013
Image Sizing Dimensions produces wrong image sizes upon export for certain images.
Example, I have export set up for iPad resolution, 2048x1536px at 264ppi. If I now export an 3264x4928px image it should be resized to 1356x2048px. What I get is 1356x2047 instead, one pixel too short on the long side. This doesn't happen for all images source resolutions and ratios though. I haven't figured out the pattern yet.
View 31 Replies
View Related
Jun 28, 2013
When I use Lightroom with the LG 29EA93 29 inch Widescreen LED Monitor Lightroom 5 initially looks and works OK but when I try and make changes using develop I get a gray area where the image should be (see below). I have tried other resolutions and that made no difference. Other apps/programs work fine.
I tried my old monitor 1680x1050 and Lightroom 5 functions fine on that one.
View 1 Replies
View Related
Aug 17, 2012
Somehow my pixel dimensions and document dimensions have become locked and when I try to crop an image the cropped dimensions remain in the same proportions of width to height as the original. There are little symbols and brackets to the right of both pixels and inches. I don't know how to remove these. I am using an antiquated version of Photoshop Elements - version 2.0 on a Mac running 10.4.11.
View 6 Replies
View Related
Jun 15, 2012
Using CS6. When I open a new file I get a small white canvas upon which to draw. This is 16.02cm x 11.99cm. These seem odd values to pick for a default. Is there a reason for it?
I wish to change this default size as I find it inconveniently small for my drawing work with the pen tool. Before I do this I'd feel better if I understood the thinking behind the original default dimensions.
View 3 Replies
View Related
