I want to produce images that are exactly 4" x 6" to use as masters to make 4" x 6" borderless photo prints. I use Resize > Canvas Size > Absolute Size > 4.00 width > 6.00 height. When I save a print the resulting images are not exactly 4" X 6" so they do not produce useful borderless photos. Different photos have produced different size images using those same settings. The only way I have been able to learn that they are not the exact size that I need is to print and measure them.
Is it realistic to expect Paint.net to produce images that are exactly 4" x 6"?
Is there a better way than printing and measuring them to determine that the images are the desired size?
I am using photos for a slideshow. How do you resize a photo or video on the overlay track to the exact size on the timeline? I know you can use the resize handles but is there a faster way?
How to resize the image without changing the size of the background? When I try it makes the picture fit exactly into the background when that is not what I want to do. Also the image is in a different layer than the background .
I need to resize and crop an image to a certain size frequently. I took a look at pyrochild's ScriptLab, but it doesn't seem to support these features. Is there any way I can automate this in Paint.net? I know I could use other programs like IrfanView, but I really like Paint.Net and would like to use it for everything.
just downloaded Paint.net recommended by our IT manager. I need to be able to print an image 5"L x 1.875"W. I figured out how to resize in the program, but it still prints full size.
I have just been trying to resize some images on the latest version - 3.510.4297.28964 - and I have typed the measurements that I wanted into the print size fields on the resize dialogue. The actual sizes the program resizes the images to differ though - some look to be about right, whereas some come out much larger, but they all show the dimensions that I inserted in the canvas size box. I'm sure I've done this before and this hasn't happened?
I am having trouble with Image/Resize/Image Size in PSE7. In the past I had a document size of 4x6. When I wanted to reduce the # of pixels, I just entered new #s and the document size remained the same. A couple days ago I changed both the document size and canvas size. I cannot get my old settings back. I even uninstalled and reinstalled the program, I also have PSE11 on a trial basis and it also only sees the changed settings. I've tried changing Scale Styles, Constrain Proportions & Resample Image, in addition to changing the Canvas Size but cannot get it to work like it did before I changed the settings.
I'm automating a custom watermark action for a series of photos (1000's) the orignals vary in size so thats my first hurdle to accomodate, the final water mark will comprise of a white stroke offset say -5 mm(but again ideally relative to each images size) and then placing a PDF logo at 20% opacity and placed centrally.
The problem I have is that I want the logo to be at the same scale throughout the sets of images, ideally the stroke too.So my question is can this be achieved in PS, scaling relative to document because all I can seem to do is specify a size or percentage.
A work around I considered is basing the final image size on a set width or height and then using a standard size for the logo and stroke just thought I'd try the hard way first.
I've recently started trying to learn how to use GIMP through making signatures, and for the past 2 weeks or so, it has been going fine.
Today, when attempting to resize the large image down to signature size, even though the preview shows a good quality render, after it scales the image loses all quality. Whats more, thinking it might just be a poor image, I tried to resize previously succesful images and got the same bad result.
Here are some screenshots showing pre / post scale [URL]...
Preview there is fine, and shows a good quality render (exactly what I'm looking for)
[URL]...
This is the result
I understand that the aspect box is unticked, but even with that selected the image became distorted
I have also tried cubic / Sinc, both resulting in blurry picture.
The most frustrating thing is that the preview shows that the picture can be made that small and retain it's quality, and up until now this has not been an issue.
Say I have an image that is 100x100 pixels. And I want to take one of the layers and resize it to 50% of the image size, so that it is 50 pixels. How can I accomplish that?
The reason I ask, is that have multiple images all with different size. But I have a signature (ie. watermark) that is always the same size. I want to be able to place this signature, and then resize it to XX% of the image it was placed on. That way, it should always have the same proportions.
After I resize an image with Paintshop X4 the image on the work area is so tiny, like 1" X 1" I'm talking a 2000 X 2000 pixel image. How do I prevent this?
When I resize an image and save it as a jpg when I reopen the file and go to image info it did not resize it at all. This is a 2 second job and now 1 hour later, I cannot work out why in the world PSP X6 cannot perform a simple task.
Paint.NET informs me that my photographic images are 2592 x 1944 pixels with a 72 pixels/inch (28.35 pixels/cm) resolution measuring 36 x 27 inches (91.44 x 68.58 cm). Why is it that printed copies at 15 x 10 centimetres using the File>Print facility directly in Paint.NET are far superior to those using Image>Resize before printing (without saving the resized image)? Is there any means by which I can intervene to resize the image myself without losing the original quality?
I would assume that the purpose of a 'selection' tool is to apply edits, effects, and changes to a selected portion of an image without effecting the entire image. But when I select part of my project and go up to the 'image' menu and try to resize just that part, it resizes the whole project. Is there any way I can select something and change its size?
Im new with Paint .Net. What i would like to do is get an image which is 4248 x 3163 and resize it to around 250 px - this was done successfully however the next part of this task was to paste this image onto another background and float it to the right. So you know this is supposed to be a logo.
Now should i create another new paint .net page with the size i have in mind and then paste it to the right?
If yes how could i create a nice background that blends into the image? The type of background i have in mind is a few lines with waves flowing left to right and fading away.
But I only have (can only afford) the Photo Net free Version 3.3x, 3.5.I have a photo, say 2000 x 1500 px. But it is distorted. It looks like the two people in it have 25-inch legs. So I need to select the bottom half (rectangle select)
- and "stretch" that selection (not the whole image) from 1000 x 1500 px to 1250 x 1500 px! The revised image with therefore be 2250 x 1500 px.
- but it will no longer be distorted
- and will include all the data in the opriginal photo.
All Serif PhotoPlus does is:-
- stretches the selected rectangle
- but keeps the same 2000 x 1500 dimensions
- simply by cropping off the bottom 200 or so pixels. This is not what I want. instead, whether or not Photo Net Version 3.3x, 3.5 is capable of resizing / changing the dimensions of a selected part of an image, i.e. stretching it along one axis?
It will really get me out of a hole that could never have been envisaged for such a simple, routine photographic requirement.
can a watermark stay the same size even when an image size is altered? say if its text and it gets too big when i enlarge the image how do i shrink the watermark ? when it is already merged and flattened as one picture without a separate layer.
such as a php or java script to keep the watermark distinct in a way even in a flattened pic or to select the watermark to erase it and re-apply it in the right font size back onto the resized pic?
Illustrator CS6 won't let me enter an exact number into the height and width fields. For instance, if I create a circle and enter 9mm into each field, it gets resized to something like 8.993. If I create a square and enter 144mm x 63mm, Illustrator changes it to 144.005 and 62.999.
If I load a large image (say 5400 px sq.) in Paint.net (or similar) & choose a zoom level where I like the look / size of individual elements, in ONE area. Image is still no where near 100%.
I select a rectangle so the ACTUAL size of rectangle_AND the way the selection looks AT THAT ZOOM level, is what I want. Say, to use as Fx header background.
Problem I've had: Because the image I initially cropped wasn't at 100%, when crop it - the PHYSICAL size of the rectangle may be 1920 x 180 px, but the prgm still thinks / knows it's really 3500 x 450 (or such), at 40% zoom. I can't just save the image - as it looks on screen - & it be that size when reopen it.
I DON'T want to resize / resample it, because (sometimes) that changes the current look (size of certain elements in the image). The only way I've found (gotta be another way) is take a screen shot of the cropped image, at it's CURRENT zoom level. Then it will save as a 1920 x 180 px image, NOT as a 3500 x 450 px image that was at reduced zoom.
If I resize & save at a REDUCED %, it can change the look & size of elements. Every thing I've tried to save the image - at it's PHYSICAL size on screen - say 18.5 in. x 1.75 in. (when image is NOT @ 100% zoom), results in saving a much larger image. I understand this, but looking for a way around it. Used various settings & tried to trick the apps many ways - cropping in one app, copying to another - you name it.
I have a rectangle that is the correct width (X) but the wrong height (Y). How can I stretch it so the height is exactly 200? I think I know all the features of the stretch command. I can select the right nodes using a crossing polygon and stretch it an arbitrary amount with the cursor. I can also add an exact displacement to the size it was before.
The trouble is that all changes are based on the existing size. And it wasn't an exact size in the first place.
So how can I set the height to exactly 200? The SCALE command is no good as it scales X and Y the same amount.
The obvious work-around is to draw another rectangle the correct size on top of the old one. But that's an admission of failure. Am I missing something, or is there really no way to stretch something to an exact size?
I am making a website on Illustrator 1,200 px 1,200 px. When i export it to .PSD i open it as a much larger file in pixels than this and with a whole Canvas/ Artbord white area which i don't need.
Is there any way to keep the page size like the final ouput without the white canvas area in the export?
I have a batch of 500 jpg images all in different sizes 732 KB, 634 KB, 664 KB etc.
I need to compress / save for web down to 130 KB the entire batch. I've managed to create an action which compresses them lower than 130 KB at different sizes depending on how light or dark the images are, but still not to an exact number. Is there a way to create such an action or script? I'm working off of Photoshop CS5, iMac 10.5.8.
I have hundreds of scans all from one book and I am trying to straighten and crop them all out to the same pixel amounts. For example, I have a bunch of scans that are 1000x1000 pixels with overscan on all sides, they are also all at an angle. In the end I want a folder with all the pages at 800x800 nice and straight.
So, when I open the first one, I crop and straighten it to 800x800 and then I make a custom specification at 800x800. The problem is, when I go to the next one and hit crop and pic my specification, I find out that that specification is actually for an aspect ration, not a particular dimension. I want it to automatically put the crop window to 800x800, not just restrict the crop to that aspect ratio. If this could be done it would significantly quicken my work flow.