How can I resize an image without distorting the picture, to exact pixel measurements that I choose?
Like for example, how would I resize an image to 128 pixels, to 160 pixels, while keeping the image quality?
Everytime I resize, it distorts the image.
I need to create an image to these exact specifications:
542px x 300px at 150 dpi in the GIF format.
I have tried over and over scaling my source (a JPG at 300 dpi) to those exact specifications, but once I export to a GIF, the resulting file is at 72 dpi. I feel like a dummy. Better yet, are those specifications even possible?
I want to produce images that are exactly 4" x 6" to use as masters to make 4" x 6" borderless photo prints. I use Resize > Canvas Size > Absolute Size > 4.00 width > 6.00 height. When I save a print the resulting images are not exactly 4" X 6" so they do not produce useful borderless photos. Different photos have produced different size images using those same settings. The only way I have been able to learn that they are not the exact size that I need is to print and measure them.
Is it realistic to expect Paint.net to produce images that are exactly 4" x 6"?
Is there a better way than printing and measuring them to determine that the images are the desired size?
I'm trying to resize my artboard to an exact mm size via a script so then I can add this to a batch i'm trying to achieve.
I've been trying to use the following, but i cant work out how to add the size I want in mm?
#target illustrator
var doc = app.activeDocument;
var docVB = doc.visibleBounds;
var myVisibleBounds = doc.visibleBounds; //Rect, which is an array;
myVisibleBounds[0] -= 20; //left coordinate (use negative values to add artboard)
myVisibleBounds[1] += 20; //ltop coordinate
myVisibleBounds[2] += 20; //right coordinate
myVisibleBounds[3] -= 20; //bottom coordinate (use negative values to add artboard)
doc.artboards[0].artboardRect = myVisibleBounds;
I am using photos for a slideshow. How do you resize a photo or video on the overlay track to the exact size on the timeline? I know you can use the resize handles but is there a faster way?
View 14 Replies View RelatedIn previous versions I have been able to resize the canvas and then resize the image. For example resize the canvas to 250px x 250 px. Then resize the image to the same.
Here is the process I am using:
Duplicate the layer and then hide it. Resize the canvas (Image > Canvas Size) to 250px x 250 px. Un-hide the layer and then resize the image (Image > Image Size). When I go into Image>Image Size it says that the image is already 250px x 250px. However if I try to transform the scale the image is the original size and not 250px x 250px
The reason for needing this is I resize image size (in bulk) and the canvas size using the batch process (file>automate>batch) and actions. I loaded the actions file I used in previous versions, but that did not work correctly. I then went in to do this manually and got the same results.
getting the image in this[URL]....link. I just need the air freshener symbol in the middle, the blue tree. I have been able to kind of get it seperated from the background but it always ends up being a little blurry or fuzzy on the sides. I really need it to be crisp and smooth like it is in blue.
View 5 Replies View RelatedOriginally noticed individuals faces were just slightly elongated on the monitor screen.
Used printer profile template and did not zoom to where you had to scroll up or down, etc. Although smaller than actual size, the entire image fit on the screen. Measured width and height and then calculated to see how far off the image ratio actually was. It was indeed slightly elongated.
Did this on two 17" monitors with different dimensions (Length & Width)and different monitor resolutions. Did this with both Windows XP and Mac Book Pro using the same image in Photoshop CS2 (Win) and CS3 (Mac). The Windows image is slightly more elongated than the Mac. The Mac screen resolution is slightly greater than the Windows. The image on the Mac is less elongated than that of the Windows but nonetheless elongated.
Never noticed until the recent purchase of the Mac.
The XP system prints exactly to scale. Have not yet printed with the Mac.
I've created a FIRE psd image and saved it as a jpg file:
I would now like to use this image. To do this I need to reduce this image to the following precise dimenstions: height: 238, width: 264. I know how to select and trim the image that I want using the Square deselect tool. No problem there. What I don't understand is how can I see the precise dimensions of this new image BEFORE I save it as a new file. Is there a way for me to see these dimensions as I select the image and adjust the selection accordingly?
When I drag a 3600x3600 px image onto a 3600x3600 px canvas, my image gets placed on the canvas with it's center at 1803,1803 px. So it's off just a tiny bit. When I place an image smaller than 3600x3600 px, it gets placed on the canvas with its center at 1802,1802 px or 1802.5,1802.5 px It's not terribly difficult to center it after it's placed, but I'd rather not spend the 5 seconds or so every time I place an image if I don't have to.
CS5 12.0.4 64bit running on Windows 7 home 64bit
way to draw a line down the exact center of an image, and possibly make the line look cool. I'm trying to create a custom Magic the Gathering playmat thing for a program for testing decks out.
I tried the line tool, but it doesn't seem to allow you to fill it in with the paintbucket after, or do anything with it for that matter. I just want a cool looking divider.
Then I might create another split into 3 sections vertically for 6v6 battles, any way to measure this out automatically?
Every time I open a photo in Organizer with Editor, Editor changes the time specificaciones of the photo to one hour earlier. So the photos changes the order in Organizer. What is the reason and how to repair it?
View 8 Replies View RelatedI can create the exact Raven image I want from a photograph he found.However, no matter how I try to fill in the silhouette, no matter what commands I attempt (such as convert to shape), all that happens when I attempt to set fill color as black is that the line changes color. It's as if the line itself is the shape, if that makes sense.
By the way, I originally traced it with a series of lines and then joined them, as I couldn't do this with one continuous line.
I tried converting to shape and then combining and intersecting, subtracting, you name it, using a black shape behind the lines, hoping to get a black Raven image. But to no avail. What do I need to do to fix this? I'm thinking if I retrace it again, I'll likely make the same mistake(s). I searched for a solution in this forum, but "fill" gets a ton of results.
I am trying to size a simple graphic/logo so that it is a certain number of pixels wide at 300dpi.
For example, I need the image to be 3 inches wide and able to be printed at 300dpi.
How do I specify the exact image dimensions and maintain a DPI of 300?
I have resized the image in Photoshop CS5 using Perfect Resize. The image dimensions are 20.00 inches x 13.33 inches. In the Lightroom print module, I chose these settings: cell size to 20.00 in x 13.33 in. All the margins are set to 0.00. "Zoom to Fill" is not checked.Page Setup: 17 x 22 paper. Manual - rear-borderless (retain size) .The size printed is 20.5 in x 13.75 in..What should I be doing to get the print size to match the cell size of 20.00 x 13.33?
View 8 Replies View RelatedI am working on tiny comic-strip frames that are being drawn as seperate images and when it comes to colouring, there is a time-consuming snag where I forget the exact colours of the finished frames which I need to keep checking and seeing earlier single images in order to compare and then reproduce the colours accurately in a consistent sequence.
Believe it or not, I get around this problem by taking digital still camera shots direct off the screen and consulting them afterwards! This does work, but it's hardly practical------is there an easier way to repeat the exact same colors on a separate image, without having to constantly refer to pre-existing images within GIMP? If I can reproduce the exact colours on different images automatically without having to recheck earlier images, this would save me a lot of time!
[Ideally, does every shade of colour have a code number or similar method I can enter and it will come up again accurately? This way, I could write down the shade number and repeat it exactly later on a new image where the exact same colour is required.]
The sheer number of shades of colour and tones make it very difficult to remember the exact colours accurately.
How can I find all pixels in an image with an exact, specific color? So far, I've only managed to find the pixels matching a pixel I click on; but I wish to find pixels matching a specific color value!
View 1 Replies View RelatedCan Adobe Elements 11 make edits to photos on the following photo specificiations?
Minimum size – largest dimension, with tight crop, to be min. 3in @ 200dpiPreferred size - largest dimension, with tight crop, to be min. 5in @ 300dpiCMYK color modeGray balanced, Clean and BrightCatchlights – 0%Highlight – 2% - 3% White - (C – 2%, M – 1%, Y - 1%, K – 0%)Shadow – 85% - 90%Black - (C – 70%, M - 50%, Y – 50%, K – 90%)Total Ink Limit – 260% Saved Clipping Path included with a Flatness of 1-5 JPEG file format with Quality compression setting no lower than 10
I am having trouble with Image/Resize/Image Size in PSE7. In the past I had a document size of 4x6. When I wanted to reduce the # of pixels, I just entered new #s and the document size remained the same. A couple days ago I changed both the document size and canvas size. I cannot get my old settings back. I even uninstalled and reinstalled the program, I also have PSE11 on a trial basis and it also only sees the changed settings. I've tried changing Scale Styles, Constrain Proportions & Resample Image, in addition to changing the Canvas Size but cannot get it to work like it did before I changed the settings.
View 6 Replies View RelatedI have completed a project and I need to verify that, based on what I implemented, image should be resized but quality of image (both JPEG and GIF) should not be reduced.
My question is it possible to verify the result using photoshop or some other tools? How?
My college said it is hard to check if an image looks different because of image resizing or because of quality loss or because of both. He said I have to create some log files to trace the result. It is a little too much work for me.
I created an ad using one PMS color after orginially being told that it was a "Thanksgiving 4 column x 4.5” spot color ad”. I received the following message from the newspaper printer today:
"Please relay to your corporate art department that the newspaper does not print in PMS/Pantone colors, except on a full color page, which requires an additional color charge. For spot color, we print in primary colors such as red or green, or in cyan or magenta alone.
As I understood it, spot color meant pantone, and CMYK was process. Am I wrong here or are the printers using the term "spot color" incorrectly?
I was wondering if there is a possible way to take a small image and make it larger and clear.
View 9 Replies View RelatedMake a current, parent image, pattern step and repeat at an exact distance from the parent.
I have a parent image 4.75"long X 2.00" high image I want the pattern repeated in the Y direction every 2.10" or with a .10" space between the images, to create a 1XN array or tiles or pattern?
I then want to print the new tiled, array image to the exact size.
I need some adivice on making 2d drawings of Pump stations, septic tanks, wells - here are some examples URLs...What program should i use ? If i add block to drawing can i get the specifications of the object automatically into a table, just like in example drawings.
View 1 Replies View RelatedI am just finished a residential project modeling in Revit 2010. I am working on construction set and need to import .TXT files from previous project for general notes, code compliance report, etc. I have my custom keynote file (.TXT) for user notes.
View 4 Replies View RelatedAny way to add a new field into the materials database. We would like to be able to choose the material specification for the materials we use. So we would like to have a field for each of the materials where we could choose the material spec. It would also be great if we could then be able to connect this to our BOM. The second part I know should be able to be done but so far haven't found a way to add the material spec in like we would like.
View 1 Replies View RelatedI have signed up for Adobe CC and now have Photoshop CS 6 for the Mac installed and running.When I come to use the image resize feature, I am still getting the same box as I had in CS5 instead of the new much improved feature.
View 1 Replies View RelatedIm doing a picture project, where I need to have many layers..
But just how exactly do I resize an image in a layer? If I go Image > Resize Image...the whole image collection of all layers gets bigger...and I only want that specific layer image to get bigger...
I have a jpg that is 300*300 and a res of 72 pixles per inch I need to resize for printing by about 300% (I think min print res is 300dpi) without it getting to pixalated.
View 3 Replies View RelatedI open an image and I want to use a eraser or other tools but it asked me to resize the image
View 1 Replies View RelatedI do have a image 480X320.
How to resize this image to 960X640 without loosing pixels?
I have tried to Group picture Layer into New Smart Object and then resized the image , after this I added a sharpen from Filter .
But still I am loosing image quality.
