Using CS6. When I open a new file I get a small white canvas upon which to draw. This is 16.02cm x 11.99cm. These seem odd values to pick for a default. Is there a reason for it?
I wish to change this default size as I find it inconveniently small for my drawing work with the pen tool. Before I do this I'd feel better if I understood the thinking behind the original default dimensions.
Recently started using autocad 2013.
I start a new drawing and want to change the scale factor in the dimension poperties.
After i add a dimension it does not scale up autmatically. I haev to use the update dimension command.
HOw can I get it to use the new scale factor by default?
Im jus usin the default AM_...I checked all the overrides they are set to the correct scale, is there anohter place in 2013 to set the defaults?
I have dimensioned hundreds of drawings with the Ordinate Dimension command in Inventor 5.1. I'm now using Inventor 2011 and I'm having lots of issues using this command. When I first set up the dimensions, I can't get the dimensions to default close to the view. They almost always want to be on the very edge of the title block. I don't think this is a sttings problem, because occasionally they will lock to where I want them. What am I doing wrong?
The first attachment is how they go on their own. In the second attachment, I have manually moved them, but at 1 dimension per move, it's slow, and also hard to keep the all aligned.
Autodesk Inventor 2011
AutoCAD Mechanical 2011
how to show dimensions for any room in plan , instead of default Area (SQ FT)
For example ....BEDROOM 10' 3" x 10' 0"
How to get the default dimensions style "STANDARD" back into a drawing after it has been purged? I accidentally purged it and now I want it back. .
View 7 Replies View RelatedImage Sizing Dimensions produces wrong image sizes upon export for certain images.
Example, I have export set up for iPad resolution, 2048x1536px at 264ppi. If I now export an 3264x4928px image it should be resized to 1356x2048px. What I get is 1356x2047 instead, one pixel too short on the long side. This doesn't happen for all images source resolutions and ratios though. I haven't figured out the pattern yet.
Somehow my pixel dimensions and document dimensions have become locked and when I try to crop an image the cropped dimensions remain in the same proportions of width to height as the original. There are little symbols and brackets to the right of both pixels and inches. I don't know how to remove these. I am using an antiquated version of Photoshop Elements - version 2.0 on a Mac running 10.4.11.
View 6 Replies View RelatedI have used a template in Photoshop CS2 to create a DVD/CD Cover and I have an issue saving the image for upload at the correct dimensions.
This is what I have - CD cover @ 4.75 x 4.75 inch with 300dpi. This gives me an image with a resolution of around 3000 x 3000 pixels.(approx)
There is no problem printing from PS as the dimensions in Inches is the default print size. The problem comes when I export the image as a JPEG ready for upload and sharing. It seems the pixel resolution becomes the default size settings. This will give the end users problems in printing at the correct size for their CD cases.
I, can get round this as my printer allows me to 'print at the original size' which defaults back to the size set in Inches but I don't think everyone has this option.
Is there any way to ensure that the end user will d/l or save the uploaded image at the correct size so that they will not have to do anything other than print it?
The last thing a want to do is make it a difficult thing for them to obtain.
FYI - I would like to keep the dpi resolution if possible as there is a lot going on and this might be lost if the quality is reduced.
i have a problem when i try to export a jpg image.I must do a small image for a Exchange signature.When i exported the file in jpg with save for web and i insert it in exchange, the dimensions (width and height) are ok, but less quality.However if i save normaly in jpg the quality is the top but when i insert the image in exchange, the dimension are strange, there isn't width and height correct.The file is a 72 dpi.
View 1 Replies View RelatedI have a little problem with the cropping tool in the new CS6 version.
In CS5 I had the oppotunity to choose "Front image" and the crop tool would copy the dimensions from the chosen image.
Now I made a mistake and cropped a picture with the wrong dimensions. Ususally I choose "original ratio", but this time I forgot. Then normally in CS5 I just choose one of the other pictures in my workspace (with the original dimensions) and hit the "front image" button, and then I got back the the picture I cropped in the wrong dimenions, and now I could easily crop it with the right dimensions.
I found another discussion in the forum that answered exactly this question, and it said "Try pressing 'R' in crop mode. It will open Crop Image Size & Resolution window, where you can choose Source: Custom, Front Image, etc."
But when I press "R" in the crop mode nothing like that comes up. Instead the opportunity to rotate comes up... :-( Not what I was looking for.
What to do? I work on a PC.
Working with CS2, is there a special way to match exactly two different images pixel dimesions
View 5 Replies View RelatedOriginally noticed individuals faces were just slightly elongated on the monitor screen.
Used printer profile template and did not zoom to where you had to scroll up or down, etc. Although smaller than actual size, the entire image fit on the screen. Measured width and height and then calculated to see how far off the image ratio actually was. It was indeed slightly elongated.
Did this on two 17" monitors with different dimensions (Length & Width)and different monitor resolutions. Did this with both Windows XP and Mac Book Pro using the same image in Photoshop CS2 (Win) and CS3 (Mac). The Windows image is slightly more elongated than the Mac. The Mac screen resolution is slightly greater than the Windows. The image on the Mac is less elongated than that of the Windows but nonetheless elongated.
Never noticed until the recent purchase of the Mac.
The XP system prints exactly to scale. Have not yet printed with the Mac.
I have an 8-bit image, 4800x3000 px, res 300 40.2M in size. I need to reduce it to 125K max, 640x480 px max, res 72. I must be doing something wrong because my result has lost all clarity.
View 2 Replies View RelatedI've created a FIRE psd image and saved it as a jpg file:
I would now like to use this image. To do this I need to reduce this image to the following precise dimenstions: height: 238, width: 264. I know how to select and trim the image that I want using the Square deselect tool. No problem there. What I don't understand is how can I see the precise dimensions of this new image BEFORE I save it as a new file. Is there a way for me to see these dimensions as I select the image and adjust the selection accordingly?
I am running PS CS5.5 on a a MAC running OSX 10.7.3 and printing to an Epson Stylus Photo 2200.
Background:
Basically, the dimensions of a printed graphic are different than the size that is specified in the PS version of the graphic. The amount of error is about 1/16 of an inch over a 6 inch distance. This matters as the printed output must fit a template exactly.
Details:
I create a 300 dpi resolution document. I am using inches as the ruler setting and the method for specifying the size of an object in the Free Transform Dialog. I create, with the rectangle tool, a rectangle and then use command-T to specify the dimensions to be 6 inches X 1 inch. I check using the ruler tool and verify that the shape is 6 X 1. When I print, the object is smaller. In fact, it will be 5 29/32 inches instead of 6 inches.
If I create the same object using Illustrator, the object prints (same printer) exactly the specified dimension. If I place the illustrator object into Photoshop it will "say" that it is 6 inches but prints at the reduced size.
After pulling my hair out, I have just adopted the work-a-round of scaling the output, in the printer dialog, by an appropriate % to compensate. There must be a better way to address this problem.
I have to process a couple of thousand photos. What I need to do is get PS to resize the canvas so that Height=Width, no matter which is the larger. In the area where it increases the canvas size, it should then have white space.
So that for a 10x5 landscape picture, it resizes to be 10x10 canvas, for a 5x10 portrait picture, it resizes to be 10x10 canvas, etc.
I have an image that I want to use in a video, though it is not physically large enough to fill the 1920 x 1080 dimensions of the video, though it has a 300ppi resolution and video only needs 72ppi. How do I take advantage of the fact that it is high resolution image, and increase the physical dimensions of the image? Is there a way to do this?.
View 17 Replies View RelatedI am trying to crop or resize an image that is originally 2,122 x 1,415 px | 7.1 x 4.7 in | 300 dpi. I am to crop/resize image to fit 756 x 275 px. However, I don't want to lose the whole image. I would like to use the whole image just adjust it to the dimensions.
How can I accomplish this without creating any distortion or by removing elements by cropping the image?
When I create an image layer (say 1.5 x 1.5 inches) and when I set that image onto a background (say 2.5 x 2.5 inches) the image expands to the larger background size.
Why? Or what am doing wrong that would cause this to happen. I recently upgraded from PSE 9 to PSE 12. This was never an issue with PSE 9.
I have just downloaded pixel bender for CS5 and know I get this message The image dimensions exceed the hardware capabilities of your GPU. What do I need to do to make it work
View 4 Replies View RelatedSince CC 14.1 the Replace Color (Image/Adjustments/Replace Color) function always opens with 'Selection" selected. Is there any way to get the default selection to be 'Image'.
View 1 Replies View RelatedI had to reload my CS software and have not been able to use CS3 as the default vile viewer. Now CS is loaded when using the "open" and CS only appears in the "open with list".
Obviously I would prefer all Photoshop programes (PS6, 7, etc) to be available, but will settle for the latest (CS3) to open my images. It would seem that because I reloaded CS the OS sees this as the default imagefile viewer. Have not been able to find an answer in the forum replies or FAQ's.
99% of my images end up at 6" X 4". now, for every image, i goto image-->image size and then insert the 6 X 4 numbers. is there a way to make 6 X 4 the default so that i don't have to do this each time i process an image?
View 2 Replies View Relatedevery new image opened in CS4 opens as a maximized window, with portions of the image hidden behind the right-hand panels ... and so for each new image, I must execute the menu sequence Window - Arrange - Float in Window, then re-size the resulting window.
Is there any way to set my preferences here as a default?
Saving my workspace doesn't do it.
I'm trying to add dimensions to my 3d drawing and can get it to work sometimes and sometimes I can't.
I attempt to do a dimension from the base of a pole to a ground anchor 32' away.
I receive the following message: Oblique, non-uniformly scaled objects were ignored. Specify dimension lin locaiton or
{Mtext/Text/Angle}
I belive it has something to do with getting the UCS set up correctly, I've re-oriented my UCS several time and get no dimensions.
I'm trying to upload a .svg file to a t shirt printing site. The image is to be printed on a sleeve therefore the dimentions need to be small (5 inch x 5 inch when uploaded). Every time I upload the file, it is returning information that the file is too big : 1261 px x 1323 px, 10.5 inch x 11.0 inch.
When I try to reduce the image size in Illustrator, the dimensions are still the same when I upload it?!?!? It is quite a complex design.
Using Illustrator CS3
Currently I import raw images to my desktop, view in Bridge, make adjustments in Raw then batch process within photoshop, into JPG's.
The jpg resolution is always 240 pixels/inch How can I manually change the default image size??
Where in my work flow should this be set? In Photoshop, Raw image converter or bridge? I am using CS 4.
how can I make CC my default image editor instead of CS6 on a MAC platform ?
View 10 Replies View RelatedI am using Photoshop Elements 10 on Win 7 PC. I am trying to print multiple copies of one image on a single 8.5x11 sheet of paper? The images are artwork for buttons (to be used in button-making machine) so the dimensions must be exact on the duplicated images. When I select Picture Package, the images are resized to fit the dimensions in the picture package. When I select Contact Sheet, the images are resized to fit the number of columns I selected. Neither is acceptable. How can I repeat the same image on a single piece of paper without having the system re-size the image? I know that I can manually create a new PSE file and manually insert the images into this file. This is what I have been doing as a work-around.
View 2 Replies View RelatedMost of the images I work with need to be saved at screen resolution (in my case that's 72 or 96 dpi).
In past versions, I'd load an image, usually 300 dpi, and when I resize the image (Image -> Resize), the default resolution was always 72 dpi. All I needed to do was set the new pixel dimensions that I wanted, and I was done.
In X5, the resize box is showing the actual current dpi of the picture I'm trying to resize.
Is there a way to set X5 so that the Resize function always defaults to a specific resolution (i.e. 96 dpi)?
I am trying to size a simple graphic/logo so that it is a certain number of pixels wide at 300dpi.
For example, I need the image to be 3 inches wide and able to be printed at 300dpi.
How do I specify the exact image dimensions and maintain a DPI of 300?