Paint Shop Pro :: Image DPI - New Pixel Dimensions
Sep 20, 2012
Most of the images I work with need to be saved at screen resolution (in my case that's 72 or 96 dpi).
In past versions, I'd load an image, usually 300 dpi, and when I resize the image (Image -> Resize), the default resolution was always 72 dpi. All I needed to do was set the new pixel dimensions that I wanted, and I was done.
In X5, the resize box is showing the actual current dpi of the picture I'm trying to resize.
Is there a way to set X5 so that the Resize function always defaults to a specific resolution (i.e. 96 dpi)?
View 2 Replies
ADVERTISEMENT
Apr 4, 2007
Working with CS2, is there a special way to match exactly two different images pixel dimesions
View 5 Replies
View Related
Aug 12, 2013
I am trying to crop or resize an image that is originally 2,122 x 1,415 px | 7.1 x 4.7 in | 300 dpi. I am to crop/resize image to fit 756 x 275 px. However, I don't want to lose the whole image. I would like to use the whole image just adjust it to the dimensions.
How can I accomplish this without creating any distortion or by removing elements by cropping the image?
View 5 Replies
View Related
Mar 4, 2013
I can not use my HP scanner. It looks like the image size is wrong and should be reduced to less than 49999 pixels high x 4999 pixels wide. Where could I change the image size in X4. Using Windows 7 Pro.
View 2 Replies
View Related
Sep 12, 2011
Joined the recent webinar on X4 and very impressed with the product. I currently use Photoimpact X3 but looking to change to the new product.
How do I import photos of all different sizes and output to a 800 x 600 photo suitable for import to a digital photoframe? In Photoimpact, I set up a new image that is 800 x 600, make changes to the photo (crop, hue, etc), resize so that the minimum ht or wdth is 600 or 800, right click, copy, move to new image, paste, then move the image about until I am happy with the finished photo and save to a file that will subsequently be copied to a USB pen drive.
View 3 Replies
View Related
Dec 15, 2012
"Image > Print Size" really IS the command you are looking for.
The key is to pay attention to the units-of-measure shown on the Print Size dialogue box:- The "Width" and "Height" values under Print Size are displayed in real-world units (inches, mm, etc.), not image pixels.- The "Resolution" values are displayed in pixels-per-unit.- You cannot change your image's pixel dimensions (aka scale the image) from the Print Size dialogue. That's what the "Scale Image" command is for.Remember the relation between pixel and print sizes is:(print size) = (pixel size) / (print resolution)
When you change the image's print resolution, of course the real-world size (the "width" or "height" shown in the Print Size dialog) of your image will update to reflect the new print resolution -- that value is calculated from your image's actual pixel size and whatever resolution value you just entered. This is totally normal behavior -- in fact, it's expected. If you change an image's resolution from, say, 150 pixels/inch to 75 pixels/inch, this doubles the print size of your image but only the print size; the image's pixel size remains precisely the same as before. (You can confirm this by comparing "Image > Canvas Size..." before and after changing the resolution.)
And as others have stated, if you're using the image for Web viewing then its print resolution has absolutely zero effect on how it will appear onscreen (print resolution only affects, well, actual printing), in which case you'll want to use the "Scale Image" command to actually scale your image larger or smaller.
View 2 Replies
View Related
Oct 8, 2012
I have just downloaded pixel bender for CS5 and know I get this message The image dimensions exceed the hardware capabilities of your GPU. What do I need to do to make it work
View 4 Replies
View Related
Apr 11, 2013
When I crop a picture Pixel Demensions become 6 bytes Width and Height 1 pixel each. I can no longer see the picture. How can I fix this?
View 4 Replies
View Related
Sep 14, 2011
it is possible draw objects - rectangles, circles, rounded corners and create text objects - aligned to screen pixels? Photoshop has it - Pixel-Precise Alignment. Result is -- an edges are not blured, example -[URL]
View 2 Replies
View Related
Jun 5, 2011
I am using PaintShop Pro Photo X3 build 13.2.1.20 with an HP Deskjet 6940 printer running on a 64-bit Windows 7 Home Premium system. If I follow the following workflow an apparent problem is revealed:
1. Open image file and go to File | Print...
2. Under Size/Position choose Fit to Page and note the image size details
3. Click on Properties
4. Go to the Paper/Quality tab
5. Change the paper size to A5, for example
6. Click OK
7. Note the image size details - they have not changed from those noted in 2
8. Click on Properties
9. Click on OK
10. The image has now been resized
11. Click on Properties
12. Choose a different paper size
13. Click OK
14. The image has not been resized from the dimensions in 10
15. Click on Properties
16. Click on OK
17. The image has been resized
View 2 Replies
View Related
Aug 3, 2013
I am looking to cut some pictures out with the specific dimensions of 960x350. I am using the cropping tool (free form), but it does not show me what the dimensions are as I drag it across.
Anyway to set a crop to that size and then I can just move it around the picture till I have it just where I want it?
View 13 Replies
View Related
Jun 7, 2013
When I take a 1800 pixel wide image and resize down to 150 pixels it becomes pixelated.
View 3 Replies
View Related
Oct 28, 2011
I have a rectangular screen grab (Windows application) that I would like to simply round the corners and add a border. The image is not a photograph, but since I have Paint Shop Pro X3 and like how it works, I thought I would try it . I have spent some time trying to do this with Paint Shop Pro X3 with no luck. None of the pre-defined frames seemed to do what I need. I would also like to create a drop-shadow behind the image. how to do this or a video that I can watch. A list of steps would also be OK.
View 1 Replies
View Related
Jun 8, 2012
How can I create a 2D gray scale image from a color image?
View 1 Replies
View Related
Mar 13, 2011
I managed to remove the background, of an image,(A whit background) and put the image on top of a transparent layer. made a transparent image. When I place this image over a light color background, it looks fine, but when I place it over a dark color background, the edge of the image looks very rough and dirty, I think it's because some of the anti alias from the original image, how can I make it a clean image without going to delete pixel by pixel?
View 2 Replies
View Related
May 3, 2008
I opened a jpg image in PS CS2, and opened the Image size panel. I found the following: Width 2304 px., height 1728 px., doc size 32" x 24" at 72 px/in, and Pixel Dimensions 11.4M.
Can anyone explain the relationship of the pixel dimensions to the other data, i.e., how the pixel dimensions are calculated.
View 7 Replies
View Related
Oct 15, 2013
In this panel the pixel dimensions show is 4,50M . I would like to know How the "Pixel Dimensions" is calculate ? This 4,50M confuse me because my file size is 1,2M.
View 5 Replies
View Related
Dec 19, 2011
I have an image of a map and want to create a number of individual images of that map each with a large white dot with a black edge (to highlight different cities).
I have created a separate image of the dot using both transparent background and normal background and then attempted to use EDIT>COPY the image of the dot and then EDIT>PASTE to the image of the map but no matter which PASTE option I use I cannot achieve what I want to.
Also (different problem) I lost my MATERIAL PALETTE. I noted that to restore it I could use VIEW>PALETTES and select MATERIALS but it was already selected. I also used the F6 key without success. I had to start PSP by pressing the SHIFT key when I started it to restore PSP to its defaults and then I could select and display it. So what stopped me from displaying it in the first place?
View 7 Replies
View Related
Sep 29, 2013
I have always struggle with resizing images for use as avatars. I just never seem to get the right size, pixel and resolution combination for the best result.
I usually start by entering the pixel parametrs, then use "trial and error" until I get a file that fits the given constraints and they are often too small, or too grainy. What is the workflow? Where do I start and how to I end up with the best result? The "Pixel Dimensions" don't seem to reflect the file size. Is the answer in the popup that asks for small, medium, or large file size?
View 3 Replies
View Related
Jun 10, 2006
Is there a way I can see the pixel (not inches) dimensions in the document status bar without having to alt click it, and also see pixels in the info pallete.
View 3 Replies
View Related
Sep 17, 2008
Is there any way of getting the pixel dimensions of a layer within the project? Clicking on image>image size only gives me the dimensions of the entire thing.
Example: I am building a mockup of a Website at 1000x620. After adding photos and free transforming them, I would like to know what the size turned out to be so that I can now resize the original photo to place in the site.
View 2 Replies
View Related
Aug 13, 2009
I need to be able to see the pixel dimensions while I'm cropping. I clicked on the "Info" pallet and it shows this in inches, however, I didn't see how to change it to pixels. For some website work I need to set images to specific pixel sizes and yet be able to move around the image to crop where I need at these dimensions.
View 3 Replies
View Related
Jan 1, 2013
I am sizing illustrator artwork to be specific pixel dimensions (ex: 294 x 76 px). I slice by "making" slice (object/slice/make). I then export by saving for web & devices. When I then preview the artwork I see the file size is 295 x 77px the wrong size by one pixel. all artwork is expanded prior to being sliced so there are no drop-shadows or effects messing with the slices sizing.
View 1 Replies
View Related
May 30, 2012
Illy CS5
For the sake of a clean test: I create a new doc, using the New Document Profile: Print.
Select Rectangle Tool, click on artboard, type in 300px for width. ENTER.
In inches, it measures as 4.1667in. Why?
I expect it to be precisely 1in.
Also, if I punch in 300pt, it comes out to be 4.1667in as well.
View 4 Replies
View Related
Aug 25, 2012
A client sent me four images taken with his Canon camera - they are in Canon Raw (.CR2) file format. I can't get them to open and then save them as a .jpg or a .pspimage format in either PSP9 or in X3. In X3, when I click on the pic, it brings up the "Canon RAW Lab" dialogue box, showing a black and white image but with a deep pinkish cast to it. And there is no options to save it. What do I do from here?
View 7 Replies
View Related
Dec 1, 2012
I am using PaintShop Pro X5 & PaintShop Photo Pro X3
I have an image which was originally made up of two other images side by side. They are both of similar colours and content but the dividing line between them is quite obvious. I don't have the original PSP files in order to use the selection and layer method of feathering them, so what would be the best way to get the pixels to blend across the join? I thought there was a tool in PSP to do this but can't find anything.
View 3 Replies
View Related
Jul 4, 2012
I have learned how to remove a background and how to save the resulting image as a PNG.
View 3 Replies
View Related
Dec 30, 2011
I have 2 gif images. On image2 I have erased the background so as all you see is the checkerboerd.I want to place image2 (the visible part) on to image1.
I'm sure I have done all the correct procedures but the #2 image will show either a black or white background when pasted on to image 1.
These are the rules I followed. To make one image color transparent
1. Choose Image Palette Set Palette Transparency. If you are prompted to reduce the color depth and number of layers, click Yes to continue and then choose the options for decreasing color depth.
2. On the Set Palette Transparency dialog box, choose one of the following options:
• Set the transparency value to the current background color — makes the background color transparent
• Set the transparency value to a palette entry — specifies a color to be transparent. Click the color in the image, or click the color box to select from the current color picker. If you want to view the transparency, click Proof.
3. Click OK. The color is now transparent; however, it may still be displayed until you hide it.
View 1 Replies
View Related
Jan 2, 2012
I have 3 images which I am looking for the best treatment.
a) Dark hair: the woman has an dark hair which is almost blended with the background. What to do to bring more definition to hair and to “separate” it from background?
b) Face light: one side of the man face (and body) is with much brightness, blending with his white shirt yet. Is there any way do correct it?
c) Spot of light: in a slice of a landscape there is a spot with much clarity/brightness. I would prefer to bring more blue from the sky then light. On the other hand, maybe there is any way to take benefit of the light.
View 3 Replies
View Related
Dec 1, 2013
Why is it necessary to have an image open before using the "Paste as New Image" function.
I want to be able to copy an image from another program and paste in into PSP for editing. I can only do this if I first open a new or existing image in PSP before doing "Paste as a New Image".
View 1 Replies
View Related
Sep 24, 2011
I go-image-resize-resample-unncheck resize all layers-set new value via % (tried 400%)-lock aspect ratio in a jpeg image.but not much happens, I want to try and double the size, where am I going wrong?
View 14 Replies
View Related
