Paint Shop Pro :: Pixel-Precise Alignment Graphics And Text In X4?

Sep 14, 2011

it is possible draw objects - rectangles, circles, rounded corners and create text objects - aligned to screen pixels? Photoshop has it - Pixel-Precise Alignment. Result is -- an edges are not blured, example -[URL]

View 2 Replies


Paint Shop Pro :: When Use Text Tool To Write There Is No Alignment

Feb 9, 2013

I have PSP 8 and windows 7. When I use the text tool to write there is no text alignment. I have lost it. How do I get it back on my tool bar?

View 2 Replies View Related

Paint Shop Pro :: X4 Use Precise Cursors Is Broken?

May 29, 2012

I upgraded my Paint Shop Pro from X2 to X4 recently and now I find that the precise cursors seem to be broken.

The crazy thing is that it has broken X2 as well so I'm a bit stuck. I know that it used to work because I use PSP for digitizing vector curves and have existing drawings where the vector node is not at the center of the pixel grid.

View 1 Replies View Related

Paint Shop Pro :: X5 - Inaccurate Precise Cursor Positioning

Dec 7, 2012

PSPX5. I've just noticed that the brush size is 1px per side less than is set:

brush size.png (4.14 KiB) Viewed 465 times

View 3 Replies View Related

Paint Shop Pro :: Image DPI - New Pixel Dimensions

Sep 20, 2012

Most of the images I work with need to be saved at screen resolution (in my case that's 72 or 96 dpi).

In past versions, I'd load an image, usually 300 dpi, and when I resize the image (Image -> Resize), the default resolution was always 72 dpi. All I needed to do was set the new pixel dimensions that I wanted, and I was done.

In X5, the resize box is showing the actual current dpi of the picture I'm trying to resize.

Is there a way to set X5 so that the Resize function always defaults to a specific resolution (i.e. 96 dpi)?

View 2 Replies View Related

Paint Shop Pro :: Changing Pixel Size In X4?

Mar 4, 2013

I can not use my HP scanner. It looks like the image size is wrong and should be reduced to less than 49999 pixels high x 4999 pixels wide. Where could I change the image size in X4. Using Windows 7 Pro.

View 2 Replies View Related

Paint Shop Pro :: How To Produce 800 X 600 Pixel Photo

Sep 12, 2011

Joined the recent webinar on X4 and very impressed with the product. I currently use Photoimpact X3 but looking to change to the new product.

How do I import photos of all different sizes and output to a 800 x 600 photo suitable for import to a digital photoframe? In Photoimpact, I set up a new image that is 800 x 600, make changes to the photo (crop, hue, etc), resize so that the minimum ht or wdth is 600 or 800, right click, copy, move to new image, paste, then move the image about until I am happy with the finished photo and save to a file that will subsequently be copied to a USB pen drive.

View 3 Replies View Related

Paint Shop Pro :: X6 - Layers Out Of Alignment?

Oct 22, 2013

I've had an e-mail from a PSPX6 user friend He says he's been trying to build an image in layers but has discovered that they are out of alignment.

View 8 Replies View Related

Paint Shop Pro :: Alignment And Changing New Objects

Oct 31, 2011

All i want to do is create a new image... a black background to be exact which I can do easily enough, then I open a second image (a picture taken by hubble, im creating a new desktop background). I copy that picture, paste it onto the black background. All I want to do now is center the hubble picture on the black background. I can do it manually of course, but when I click on the hubble picture so that it is selected then go to the 'objects' drop down menu I see the 'align' option, it then opens another menu and it has it right there "center in canvas" but it is not selectable, actually the entire 'align' menu is grey meaning I cant select any of the align options.

Also, same project, the hubble picture... I want to but a border around it. Under the 'image' drop down menu is a add border option... but it adds a border around the black background/canvas and not the hubble image that I have selected!?! Why?

In both cases its like the program is not accepting that I have a new image (the hubble image) selected, its only allowing me to alter the initial black background.

View 5 Replies View Related

Paint.NET :: Text Alignment And Word Wrap?

Sep 1, 2013

I have a number of textures of marble, stone, rock... much of which I use in construction projects within Second Life where I am a Builder.
I have a small project in the works to produce a stone structure; that has some text engraved into the stone.  I have the text typed up in MS Word.  But when I copy/paste that into; there is no left/right/center alignment; and the text has no 'word wrap'... it just pastes it all as one single reeealllllly long single spaced line... like there is no bounding box to contain it.  Further more, I am not sure how I could make it appear as though it were 'engraved' ...
Now I do know how to make/add Layers... I use often to manipulate many of my existing Second Life textures that I buy from within Second Life, and upload onto my computer to 'tweak' them.  Sometimes I'll add an alpha transparency layer of Spanish Moss to a Stone Wall, for example, then re-upload that back into SL.. and I now have a building with stone walls, and spanish moss hanging over the walls to give it more unique look.
I know I can create a "layer" of Text, that can then be added over a stone or marble texture image...But I can't figure out how to get that text to wrap or center, or appear engraved
How would I acquire these features, is there a plugin that does all this for text?

View 9 Replies View Related

CorelDRAW Graphics Suite X5 :: Getting RGB / CMYK Color Values Of A Bitmap Pixel By Pixel?

Feb 19, 2012

Via VBA macro, some way of getting RGB/CMYK color values of a bitmap pixel by pixel?

View 1 Replies View Related

CorelDRAW Graphics Suite X6 :: Paragraph Text Wrap - Irregular Base Alignment

Oct 24, 2012

This is a problem that comes from previous versions. When applying a figure using Wrap resource to a Paragraph Text in columns: most of times the basis of the text is not aligned correctly.

View 2 Replies View Related

CorelDRAW Graphics Suite X5 :: Precise Drawing - Accurate Square

Jul 13, 2011

I am trying to create a very accurate square Ex. 50 mm x 50 mm

Which tool is best in CorelX5

View 18 Replies View Related

CorelDRAW Graphics Suite X6 :: Precise Node Edits / Additions

Nov 14, 2012

I am creating a object that will involve creating tangent lines between two circles.  Then, I will need to cut out the curves of the circles so the end shape is like an eggshell or the travel of a rope between two pulleys.

What I am doing, is creating the tangent lines, coloring them green (so I can see the end of the tangent line), making sure the line is arranged on top.  Then selecting the circle and the node edit and adding a node where the tangent line ends at extreme magnification.  Delete the unneeded nodes on the circles so it forms the "end shape."  Then I select both objects, then the node editing tool, select both nodes (end of tangent line and node on end of former circle), and join the curves with the option that joins the curve over the space (this is the part that bugs me).

When I do this, I still notice a slight space between the tangent line and where I added the node to cut the circle.  Is there anyway normally with x6, or with a macro, that can place the new node accurately?  For instance, wherever the center-lines of the curves/lines meet/intersect? 

View 3 Replies View Related

Paint Shop Pro :: Space Added To End Of Text / Text Off-center?

May 8, 2011

I do a lot of CD designs, and often I have my text centered on the front covers. When I put the text centered, however, PSP is added an extra space to the end of text, so when I center it on the canvas the text is actually off-center to the left. When I go into edit the text, there is no space on the right of the words to delete.

With the text selected this is how it looks: The right edge of the frame should be flush with the right edge of the last 'T'.

View 11 Replies View Related

Paint Shop Pro :: Make X3 Text Tool Remember Text?

Mar 22, 2012

Way back when I originally bought PSP X3, I used it for a short while then went back to X2. Mostly because the X3 text tool would not remember text I had used. Now I've recovered from a hard-drive death and want to move forward and use my X3.

How can I make the X3 text tool remember text?

View 2 Replies View Related

Paint Shop Pro :: When Use Text Tool / Text Cannot Be Moved

Sep 9, 2011

I have a .jpg file with an image, which I copied from the Clipboard. I now want to add text NEXT to the image. That is I now want to type text and position the text after is typed.

When I use the Text Tool, the text cannot be moved.

View 2 Replies View Related

Paint Shop Pro :: Text To Curves Rotating Text

Nov 15, 2013

I would like to create a number wheel with the numbers at 90deg to the circle but I cannot find any way to achieve this and it seems like something that should be doable within the text to curves feature.

Here is an example of what i would like to achieve.

View 9 Replies View Related

Paint Shop Pro :: Watermark In Text

May 7, 2013

I am trying to find a way to watermark my photos using text for uploading to the net to try and prevent image theft. Canon Zoom Browser adds text but only 1 pic at a time.

I have searched this forum without success and searched the internet without success except for Alamoon which does one pic at a time ok but to do in batches requires you upgrade at a cost of about half the price of upgrading to PSP x5.

I read a comment by a subscriber here dated 2010 referring to PSP x3 but it said that after going to Image->Watermarking->Visible Watermark, you have to load a "pre-made image ..." Where do you get this pre-made image from ? Remember, I only want to add a couple of words of text. Surely this is not beyond the capabilities of Corel? Alamoon does it very easily. It doesn't take numerous windows and dozens of clicks with multiple layers to negotiate etc.

View 14 Replies View Related

Paint Shop Pro :: Creating Text On X5?

Mar 22, 2013

Trying to follow tutorials to create text. They all say to choose type (vector, floating, or selection) from the box on the text toolbar. I have been over it with a microscope and can't find it. I have expanded all arrow flyouts - nothing.

View 2 Replies View Related

Paint Shop Pro :: Can't Get Text To Work

Jun 3, 2011

I just got psp x3 and i can't get my text to work all it dose is put the 1st letter in and the rest is blank or it put the 1st letter and the 2nd is blank then the 3rd one come up and the 1st letter is gone. I up new up dates in and it doing the same thing

View 3 Replies View Related

Paint Shop Pro :: X3 And X4 Cannot Use ANY Text Other Than Vector?

Dec 11, 2011

have used Paint Shop Pro X3 for as long as it has been around and could always change text(select the text tool)from Vector to floating before actually typing the text. Now after not making any changes to psp pro x3 I it sticks on vector all the time. PSP PRO X4 Does the exact same as well. It defaults to vector and will not let me change to floating.

View 2 Replies View Related

Paint Shop Pro :: Adding Text In X3

Jul 13, 2011

When I was using PSP X I was able to add text to a template document simply by pressing the 'A' text tool, positioning the cursor, left clicking to open the text entry box and then typing (usually just the date), this I can't do in PSP X3 as the ' highlighted input box' hovers over a saved documents' previous input - (usually a month) and won't open or move without dragging the month with it. The cursor offers spurious flashes before leaving me with a flashing horizontal bar unable to proceed. The problem still occurs regardless of which previously saved and archived document I try to make adjustments to.

I had this problem too 12 months ago with a trial version which I had expected was a download fault but I think not. The routine still works fine on PSP X

View 3 Replies View Related

Paint Shop Pro :: Text Upside Down X4?

May 10, 2012

I'm having a problem in one project. When I enter the text mode there is a cross-hair with a t on an arc. When I type text it's upside down. I've tried adjusting the direction, changing fonts still doesn't work. It doesn't happen on any other projects.

View 2 Replies View Related

Paint Shop Pro :: Editing Text In Pro X3

Mar 11, 2012

I am running Windows7 64 bit and although I am fairly OK with most things in X3, there is one very simple thing that is baffling me! How do I edit existing text?

For example:

I create a plain white background.
Click on the "Text" button and add some text.
Click the green "Apply changes" and then do something else e.g add some graphics etc.

How can I then edit the text that was created (Correct a spelling mistake, change font size colour etc).

View 2 Replies View Related

Paint Shop Pro :: Vector Text In Script?

Feb 6, 2012

(PaintShop Pro v8.10)

I have a single vector text instance in my (PSP file) image. It says "cat". I want to make multiple copies of the image but with the word "cat" localized into different languages. Rather than editing the vector text via the "Text Entry" dialog box I was hoping to be able to do this with a script. The the idea is that I would have a copy of the script for each language, change the relevant text as required and run the script. E.g. For French, I would edit the script changing "cat" to "chat" and then run the script against the French image.

So first I wanted to identify the part of the script that I would need to edit. To do this I created a script as follows: I started the script recorder, change the text "cat" to "dog" in the Text Entry dialog box, saved the script, opened it in a text editor and searched for the text "dog". However, the word "dog" does not appear anywhere in the script. I don't understand this. Where is the vector text "dog" being stored? If I run the script against a different image that also has a single instance of vector text, it changes the text to "dog", so the script is working correctly.

View 4 Replies View Related

Paint Shop Pro :: Text On Vector Layer

Jun 27, 2012

I've been marking-up images with vector text (on vector layer) and have some issues. After clicking to position the text box, typing in text and then clicking the CHECK tool button to 'set', how does one go about deselecting that text object? It's not working smoothly here!!

View 1 Replies View Related

Paint Shop Pro :: Text Position And Matrix?

May 7, 2012

This part is logical. Add text to a vector layer and write a script to show the text and the position. From what I can tell, the Characters key is the text and the Start key is the (X,Y) position.

So far no problem, click the text 1 pixel right and the Start[0] increases by 1. Same with 1 pixel down and Start[1] increases by 1.

Now for the crunch... Rotate the text and Start does not change (no matter how much you move the text).

By trail and error, I find that the Matrix key changes.

Now, Matrix has 9 values and from what I can tell Matrix[0], Matrix[1], Matrix[3] and Matrix[4] somehow relate to angle. Probably sin and cos of the angle from the x- and y- axis respectively.

Matrix [2] and Matrix[5] do increase linearly with shifts in x and y. How does this relate to the actual position of the text

You can see a more detailed description of the problem and my sample script here. [URL]

View 3 Replies View Related

Paint Shop Pro :: Text On A Path On Image In X5?

May 26, 2013

On an image of the sea and sky- I want to Place a wavy line where the sea meets the sky Have the sea beneath the line and the sky above it Place text on the wavy line to follow its path

View 1 Replies View Related

Paint Shop Pro :: X3 Line Style Over Text?

Nov 1, 2012

Using text tool to add text on photos (jpg): Any way to disable Line style that overlays text, or make a custom transparent line?

View 1 Replies View Related

Paint Shop Pro :: Put Text Inside Balloon?

Sep 14, 2011

I am using Paint Shop Pro X - the last decent version that Corel made.

I haven't done anything artistic in Paint Shop Pro in a couple of years.

I am trying to put text in a balloon, on a photograph, to show what someone is saying.

Every single thing I try arranges the text along the outside of the balloon.

All three of my books on Paint Shop Pro X and Paint Shop Pro 9 (which is very similar), the help files, and everything I can find online, specifically discuss only how to put text along the outside of a shape, or along a curved line -even though the discussion topic and associated photos often clearly show cartoon text inside balloons in the normal manner.

One discussion does show specifically how to do it; unfortunately they are written for Paint Shop Pro 5 or something, and I don't get any such dialogue box to open when I click on either A thingy on either tool bar.

Specifically how DO I put text inside a balloon in the normal manner? By normal manner, I mean, like in this post.

View 2 Replies View Related

Copyrights 2005-15, All rights reserved