Photoshop :: Export JPG Image - Quality And Dimensions
Jan 30, 2013
i have a problem when i try to export a jpg image.I must do a small image for a Exchange signature.When i exported the file in jpg with save for web and i insert it in exchange, the dimensions (width and height) are ok, but less quality.However if i save normaly in jpg the quality is the top but when i insert the image in exchange, the dimension are strange, there isn't width and height correct.The file is a 72 dpi.
View 1 Replies
ADVERTISEMENT
Aug 27, 2013
When I export the image quality is poor. I tried all settings but it does not get better. E.g. I used JPEG, progressive, highest quality. What is the reason for that?
View 15 Replies
View Related
Jun 23, 2012
My problem is related with the quality of a image.
My question is how to maintain high quality (original quality) of a image after resizing it?
If i resize it with same ratio like:
2816x2112px to 1600x1200px (4:3)
2816x1584px to 1920x1080px (16:9)
Mainly i use scale image option in Gimp. But now i need to resize many images for my work so i tried David's Batch Processor to resize my images. After using it, i found there is some quality promble with the resized image.
Then i tried, the scale option with, use quality setting from original image and JPEG quality parameter is 95, in gimp but the problem is same. I did it with also with David's batch processor- JPEG quality parameter is 95.
Other thing is that, the original image 2816x2112px (4:3), size- 3.6 MB is displaying in image viewer with 47% and the resized image 1600x1200px (4:3). size- 1.2 MB is displaying in image viewer with 83%, So my questions are: How can i check the quality of a image after resizing it, means the image is exactly same as the original? Or Is David's Batch Processor maintain the original quality of the images after resizing?. I realy need to resize many images for my work.
View 2 Replies
View Related
Feb 28, 2014
I want to export my created Slide Shows made in Photoshop 7 to My Vidieos File on my computer c drive, but it seems that the only option I have is to send it as a WMV Movie file. However, this way loses to much resolution and as I want it transported at high quality, is there any way I can send it that way, say, as a mpeg formatt?
View 1 Replies
View Related
May 12, 2009
A while back I took a Photoshop class and remember a lesson on where you could select a region of an image and save it for the web with a high quality and select another region of the same image and save it for the web with a low quality, so that the focal point was saved with a high quality and the background was saved with a low quality. I have no idea where my notes are from this class and can not remember at all how to do this. Can anyone direct me to a tutorial about this?
View 2 Replies
View Related
Sep 20, 2012
I am getting black pixals that show up around my photo when I export to PDF High Quality Print and print. Some of my other photos have the pixals show up when I open them up in preview but they are white. How are you able to get rid of these?
Here is the image. If you click on it you will see the white pixals.
View 3 Replies
View Related
Oct 30, 2013
I'm working on my design for a project (book) and I want to export a typography into Photoshop to give it more effects, work with a textured background, etc. I was wondering if I export it as a PSD file I'll be able to keep the printing quality, since printing text from Photoshop comes out pixelated. Also, would I have to re-open it in Illustrator again after I'm done with Photoshop?
View 1 Replies
View Related
Nov 18, 2013
I am exporting a file that contains a background photo with text over the top. When I export, the text is great....crisp and clean however my background image is becoming pixelated since I am making this a large print. Any tips to increasing resolution to photo files. I see there is a way to increase / bring in files at their actual size. So I may need to try that. Others?
View 9 Replies
View Related
Dec 30, 2012
I've been using GIMP to make GIFs and they were okay until one day I realized the GIF quality was terribly reduced after I exported it. But everything seemed fine when I was in the process of making it (I never use any color transformation I normally just crop and resize image and that's it) when I used playback the GIF seemed okay but once after exported, the quality was very terrible. I couldn't understand why.
Every single GIF I make ever since faces the same problem. The animation playback and everything seem fine. Just I can never export the same quality GIF like what I see in the playback, every time it ends up with a low quality one. I re-install GIMP but that doesn't work at all. I download the latest version but that doesn't change anything either.
View 1 Replies
View Related
Jun 15, 2012
When I export a Web JPG from GIMP and it offers me a sliding Quality barthat goes 0 - 100. I want to know if that's an equivalent to the similar JPG quality setting in Photoshop? The reason I'm asking is that my research on Photoshop indicated that JPG output quality settings above 75 were"theoretical." In other words, there might be measurable improvements inJPG quality past 75, but they will be imperceptible by the human eye. If the Quality settings are basically the same in both pieces of software?
View 4 Replies
View Related
Jun 11, 2013
I need to export a vector image to a .png for use on Retina display devices. What is the workflow and settings for exporting that results in the best possible quality .png image?
View 6 Replies
View Related
Jul 14, 2013
in LR5.0 one can export Slideshow as video to file in 1080 p quality . However , unlike in ather ADOBE products like Photoshop elements , one cannot export to Disc . So what is the easiest way on getting the exported .mp4 file burned onto a blueray disc preserving the HD quality.
I can see that Adobe offers ENCORE in the creative suite, but that seems overkill as I just want to burn the file onto disc. A plug-in for LR5 would seem the best solution to me , but I have not found it.
Â
What is the easiest way to achieve a burn to disc out of LR5 in HD quality ?
Â
PS : of course there is third party software that does allows blue ray authoring and disc burning ; But they all seem to come with photo or video editing software which I do not need . I want to stay with Lightroom , just burn the slideshow to disc
View 4 Replies
View Related
Mar 16, 2012
What's the best EXPORT settings to get high quality for a .jpg website banner. I have played around with the settings and got no where. :-( I want the text to stay clear and sharp, and my dark colors actually dark. My setting so far give me faded colors and blurry edges on the text.
View 4 Replies
View Related
Nov 17, 2011
I have a little problem with JPG files. When I’m trying to export .IPT file to JPG file I can’t adjust quality of JPG file. Even if I change pixel quantity up to 1000 quality of picture stays same. Also size of the file is does not change no matter how much pixels I use. How to improve quality?
View 4 Replies
View Related
Sep 30, 2013
is there a way of exporting my AutoCAD drawings in high quality? Maybe Tiff?
The problems I have with exporting is that if export a drawing as a *.wmf the thick lines come out too thick even when using the 0.3 mm thickness. If i use the 0.25 mm thickness the lines are as thin as with the default thickness.
The contour lines of an image I imported into my AutoCAD drawing are coming all blurry when I export into wmf file even when using the 600 dpi resolution (highest available on the menu).
Inside my AutoCAD drawing my image map has a very high quality but when I export it, with AutoCAD polylines on top of it, the drawing comes out horrible.
I painted a blue polyline to represent a river in a contour map. This is for a civil engineering project. When I export the drawing, the polyline comes out too thick and the image behind comes out blurry. This happens even when using the highest definition possible for a wmf export (600 dpi).
I've read in another thread about a way of exporting into tiff. I followed the directions but the thread is not well explained. It doesn't say whether it is necesary to have or buy certain software. And it doesn't say what to do next to export the tiff drawing.
how to export high quality AutoCAD drawings?
View 6 Replies
View Related
Mar 22, 2013
how to export my images to a file on my computer in JPEG in a high quality for printing large prints? I have done several to e-mails and facebook. But struggling to figure out how to do it correctly for prints. I would like to submit them to a photo lab, but I am afraid I don't have the correct settings.Â
View 1 Replies
View Related
Sep 26, 2013
When I open the photos in "Library" do not look good. In "Develop" yes... When I go Library to Develop, the screen moves a bit, and then it looks good but does not work because when I export, the photos look, like in Library. I'm climbing the walls from last night (I uninstalled, updated, etc) Now is Lightroom 5.
View 6 Replies
View Related
Apr 8, 2014
Using a Macbook Pro, 2.6 GHz i7 8MB RAM
Â
1) Importing 1920 x 1440 GoPro footage, .mp4, 29.97 fps : What sequence settings do I need for this media? I can't find any presets that match it. So I just pick a 1440 x 1080 sequence. What should I be doing?
Â
2) Exporting Media quality is very poor and pixelated. I am just importing a video into a sequence and exporting about 10 seconds at a time with different export settings: H.264/Match Source, Quicktime, H.264-Blu ray with different presets. And I'm checking "USe max render quality". Every time it renders very pixelated.
View 1 Replies
View Related
May 27, 2006
I'm using a Coolpix 8800 and I am increasingly disatisfied with the results. Very few of the images that I take with this camera appear to me to be properly in focus. They seem to have a sort of soft focus effect.
This sort of chimes with a review I read recently in a magazine which gave it very poor ratings for the autofocus.
I am also not sure if I am expecting too much from it? Many images seem fine when viewed as fitted to screen or print size (viewing on LCD montior 1280/1024 screen resolution) but it's when viewing actual pixels that what I think is the poor results of autofocus are shown. Is something like screen resolution introducing an effect here that is illusory?
I'm shooting tif files and editing in CS2.
View 7 Replies
View Related
Mar 12, 2012
When you reduce the image quality of a jpeg image , How exactly is it reducing the quality? is it applying file compression , reducing bit depth or is it reducing the sampling rate of the image? or anything close to the above....
View 2 Replies
View Related
Dec 8, 2012
is it posible to get high quality image from low reolution image 100x100 ? i try using 2 software. paint.net and adobe photoshop cs6. here is the original image (115x140 px)
[URL]
and this is my result using paint.net (1000x1218 px) [URL] (cause of bwk i did not post it here. klik the minus link)
Â
and this is result with photoshop [URL]
Â
share with us if you know how to do better resample with high quality pixel.
View 4 Replies
View Related
Sep 16, 2012
I had CS5 installed over a year ago and running without any display problems until recently. About a week ago I noticed severe banding in the high light areas of my images when I opened them in PS. At first I thought there was something wrong with my camera, or just plain bad images, until I realised that the images display without any banding in Windows Photo Viewer or any other viewer! I'm running Windows XP SP3.
I have not made any hardware, software or other changes recently (except installing a Nik S/W plugin – which I subsequently uninstalled but that did not solve the problem). Also no changes in colour profiles etc. I also updated CS5 to the latest version; disable/enabled Open GL acceleration in the preferences without any effect on the problem.
View 11 Replies
View Related
Dec 21, 2008
I run photoshop CS3 and I just created an image, saved it as a jpeg and uploaded it to my website. The image looks great when I open it from the folder in the computer but on my website it has lost quite a bit on image quality.
View 1 Replies
View Related
May 6, 2004
I'm Trying to make a Headshot. Using my (Epson Perfection 1260)Scanner, I scanned a Back and White(4"x6") Sharp Image Photo at (1200 dpi) and enlarged it to(7"x 9").
Using PhotoShop I Sharpend the Image. I printed at (1440 dpi) using Glossy Photo Paper with my "Epson Stylus Photo 750" Printer. The Image has turned out Grainy and not very clear as the original although it did manage to pickup up detail like lint on the photograph LOL.
I tried enlarging the image in PS and increased the amount of Pixels, instead of during the scanning process but that resulted in poorer quality image.
The Photos that remain the same size as the original turn out excellent photo quality images.
How do I enlarge a photo from a smaller image and maintain almost the same quality as the original? It seems I am losing resolution somewhere along the way.
View 9 Replies
View Related
Dec 3, 2007
I did something with photo , but when I put it on web site - it doesn't have the same quality . it has gray circles in it .
I save the photo as jpg file , the size is 500*600 px and the weight is 120 kb .
I just took a photo of mine and add her some filters like the lens filder and spotlight...
I attched the photo (the way she look on the web) . in the original it doesn't have the gray circles in it .
View 4 Replies
View Related
Mar 12, 2008
I just recently got a Canon XTi and have been learning how to make HDR images with my camera and Photoshop CS2. I tried a few, but keep having this problem.
View 3 Replies
View Related
Dec 3, 2002
I’ve been using PS6 for a while now and I’ve always struggled with trying not to sacrifice image quality with reasonable file sizes.
I normally use a image size default setting of 800x600 with a resolution of 300 pixels/inch for most of my work.
But when saving for the web or using Image Ready to slice up more complex images I always have to bring the quality of the image down to about 25-35 to get some reasonable file sizes.
With this I get a lot of fuzzy images.
My question should I be doing something different from the start regarding my image size and resolution.
Are there any other setting I should consider when optimizing the final image.
View 4 Replies
View Related
Dec 27, 2008
How can I make the quality of the image better? everytime i draw something, then zoom in, it becomes extremely pixelated. does that mean i have to draw on a bigger canvas? is there no way to make it high quality without drawing on a bigger canvas?
View 1 Replies
View Related
Jun 9, 2006
When saving a jpeg it gives the option of inserting a number on quality. I have mine auto set to 10 but I have no idea whether 1 is better or worse or what number I should be putting in to preserve the original quality?
View 6 Replies
View Related
Aug 20, 2013
I accidentally exported original photos in low quality (reduced size from 12MB to 600KB), as I needed to quickly (herein lays my mistake) upload them to a proofing site which requires me to reduce the quality of the images significantly. I NEVER usually do anything without backing things up, or before making a copy etc. This time however, I was in a BIG rush to get these to a client and I not only exported the original files (even though I exported to a new folder, somehow, the originals got reduced as well without me noticing), but I also deleted them from my memory card (I tried card recovery software and no luck). What I'm left with now is a folder full of low quality, useless images and no (known) way of restoring them to the original high quality (12MB) state. Here are some other details:
Â
Program: Lightroom 2
Computer: MacBook Pro
Camera: Nikon D7100
(I only post this as I used my camera to delete the images off the memory cards...not sure if there is a way to recover via camera?)
Images no longer show in preview (yes, I deleted them from there too!)I did not back-up I tried scanning my hard-drive, memory card and external drive with recovery software (no luck)the images were on 2 memory cards and, as mentioned, I deleted them using my camera (when I ran the recovery software, only images that I originally deleted via my computer came up - which were the "did not make the cut" photos from the shoot that I deleted in Bridge - the rest of the photos, which are the ones I need, are not coming up in the scan)These images were to be used as posters, so high quality is crucial. There is nothing in my trash can eitherI tried using a preview extraction plug-in, but as there are no previews (duh Sanja), the plug in proved useless I think that's all the info I can provide (maybe it's too much info as is)...
View 5 Replies
View Related
Apr 10, 2012
I initially had the issue with Photoshop CS5 not being able to recognize RAW files from my Nikon D800. I managed to sort-it-out by installing the RAW Plug in 6.7 hence now CS5 opens up the RAW files from D800.
Â
However, now I'm faced with the different issue. I see a significant drop of image quality when RAW s are opened in CS5. The images looking stunning with in D800 display screen looks very dull and flat when opened in CS5. No where close to the brilliant colors shown in the D800 preview.
View 9 Replies
View Related
