I have to process a couple of thousand photos. What I need to do is get PS to resize the canvas so that Height=Width, no matter which is the larger. In the area where it increases the canvas size, it should then have white space.
So that for a 10x5 landscape picture, it resizes to be 10x10 canvas, for a 5x10 portrait picture, it resizes to be 10x10 canvas, etc.
I have a problem on resize images. How to resize the images from 72dpi to 300dpi without changing the image size in Photoshop CC? It enlarges the images or pixels, but i just want the pixel to stay the same.
View 2 Replies View RelatedI've just recently changed jobs and so I'm working on a new (to me) system with Autocad Mechanical 2013. I had been working with Mechanical 2010.
One (of the many) issues that is bothering me, is that I can't seem to scale resize individual dimension. Normally, I'd create the dimensions and then if I needed to tweak the fit, I'd go into the Properties pallet and change the overall scale under Fit. Not really a good standard of practice, I know...
But when I do that on my current system, the dimension doesn't change at all.
On top of that, I have a weird refresh problem. If I grab a dim by the grip and move/stretch it, it doesn't actually show the new position unless I Regen. Is that a setting or maybe just a slow reaction by my computer?
i currently have a logo that is 460X440 pixels and 12.17cmsX11.69cms and the resolution is 96 pixels per inch.
i am wanting to change it into a 2cm X 2cm avatar that is less than 6K in size,
how do i do this? everything i try makes the output file about 24k in size.
the reason i am doing this is the forum i regularly post on has a max avatar size of 6k.
I want to change the size of the image in Gimp to 3957x4429 px (67x75 cm) at a 150dpi (the image we have has a 300 dpi.) When i do this in image - print size it keeps changing the width.
The system is not allowing me to get the picture a few cm larger. Is there any way I can overwrite this?
Working with CS2, is there a special way to match exactly two different images pixel dimesions
View 5 Replies View RelatedImage Sizing Dimensions produces wrong image sizes upon export for certain images.
Example, I have export set up for iPad resolution, 2048x1536px at 264ppi. If I now export an 3264x4928px image it should be resized to 1356x2048px. What I get is 1356x2047 instead, one pixel too short on the long side. This doesn't happen for all images source resolutions and ratios though. I haven't figured out the pattern yet.
I have adobe photoshop elements 7 and I am wanting to make my pictures be maximum 200kb and 72dpi, how do i go abouts doing this?
View 3 Replies View RelatedI have a 900x900 px image, and a 900x900 px artboard.
When I place the image on the artboard, the image is 675.094x675.094 px
How can I place the image at its native size?
Windows 7 | CS5
How can I train Photoshop to change the image size of a photo when I pull daigonally on a corner with the cursor?
View 1 Replies View RelatedHave just bought Elements 12. When editing image in raw mode I cannot change size of image using ALT in combination with the mouse scroll button like I could in Elements 8. Clicking plus and minus signs is clumsy and slower
View 2 Replies View RelatedI have an image received from a client in .eps format. I need to get it into either a .gif or .jpg format AND the final file MUST be .8 inches x .3 inces, AND no more than 10K in size. How can I save it with these dimensions/constraints and not lose resolution? What I have tried - export to .jpg (file is 5 inches x 3 inches), export and change resolution to 100ppi (image is nearly the right dimensions, but blurry). The tools I have are AI and PS both version CS5
View 10 Replies View Relatedwhy Photoshop keeps changing settings for placing objects, image size etc.?
For example: I create a new Photoshop document:
ppi: 300
Width: 160 mm
Heigth: 160 mm
after clicking "OK", these go to 160,2 mm or less than 160 mm.
The same with the sizes and places of objects etc. I create a 20 x 20 mm circle. One click later it is 19,89 x 19,89. I set it's location to X: 80 mm, Y: 80 mm. One click later: 80,02mm
have a photo that was taken by a photographer so it is very large. I want it as a Facebook Cover for my business page but when i try to make it fit the required height and width is is either to small or if i change the image size or canvas size it doesn't look right...
View 3 Replies View Related"Image > Print Size" really IS the command you are looking for.
The key is to pay attention to the units-of-measure shown on the Print Size dialogue box:- The "Width" and "Height" values under Print Size are displayed in real-world units (inches, mm, etc.), not image pixels.- The "Resolution" values are displayed in pixels-per-unit.- You cannot change your image's pixel dimensions (aka scale the image) from the Print Size dialogue. That's what the "Scale Image" command is for.Remember the relation between pixel and print sizes is:(print size) = (pixel size) / (print resolution)
When you change the image's print resolution, of course the real-world size (the "width" or "height" shown in the Print Size dialog) of your image will update to reflect the new print resolution -- that value is calculated from your image's actual pixel size and whatever resolution value you just entered. This is totally normal behavior -- in fact, it's expected. If you change an image's resolution from, say, 150 pixels/inch to 75 pixels/inch, this doubles the print size of your image but only the print size; the image's pixel size remains precisely the same as before. (You can confirm this by comparing "Image > Canvas Size..." before and after changing the resolution.)
And as others have stated, if you're using the image for Web viewing then its print resolution has absolutely zero effect on how it will appear onscreen (print resolution only affects, well, actual printing), in which case you'll want to use the "Scale Image" command to actually scale your image larger or smaller.
How can you do this? I generally create images of a different size than that so it would be really useful to be able to change it.
View 3 Replies View RelatedHow to resize the image without changing the size of the background? When I try it makes the picture fit exactly into the background when that is not what I want to do. Also the image is in a different layer than the background .
View 12 Replies View RelatedI have some really large blueprints (black and white). Some of them exceed 30000 x 8000 in size. I want to reduce the overall size of these but when I try this my image gets really fuzzy. Is there a way to make these images smaller without messing up the clarity?
View 7 Replies View RelatedSo we've been sent a DWG file for a large site, that includes a massive aerial (TIF) image.
At this point it's too large to even work with so I'd like to scale it down (proportionally, so it will still maintain the same aspect ratio).
For simplicity sake, lets say the image is 15,000 x 15,000 and I want to scale it down to 5,000 x 5,000.
The problem is that AutoCAD seems to use that pixel size to determine the actual scale, so when I updated the new (smaller) image, it was also 3x smaller in the world.
How do I scale down the image independently of the size so it will still maintain the same scale in the CAD world? (I'm a 3D guy so this is akin to scaling down a texture, yet having the plane its projected on maintain its original scale.)
I know I remember reading about this somewhere a long time ago, how to save lots of images with the same settings. How do I do it?
Example: I need to save over a hundred images as .jpg with a quality setting of 6 and the image size at 1024x768.
This is probably a really really simple question but I can't for the life of me find how I can find out an individual image size from multiple images on a canvas. eg I have 3 photos i want to arrange 1 large and the other two next to it half the size. How can I edit individual image size on the canvas as when I select the image on a sperate layer I want to resize it just resizes the entire canvas and not the individual image
View 4 Replies View RelatedI'm not sure what I did to make this happen or how to change it back, but for some reason when I change the size of an object/line it changes the stroke weight as well. (For example, if I drew an ellipse with stroke weight 2 pt, and then increased the size the stroke weight would be 2.856 pt or some such number instead of 2 pt.) How to change this back?
View 3 Replies View RelatedHaving a really annoying issue that I've noticed since the latest CC update. If I have, let's say, a square of 100 x 100 mm in Illustrator and I copy it and switch to Photoshop, create a new document using the clipboard as the preset, it gets the mm dimensions wrong. My understanding is this should be consistent and not effected by things like DPI/PPI and I've ever had the problem before. It's effecting everyone in our studio and we're all running the Mac version of CC.
View 11 Replies View RelatedIs there any way I can scale images down in size, whilst keeping the quality of the image? I am a Media teacher having to use this software with the class and they must have high production values for their controlled assessment. However, I do not know how to get around the problem that all the work is predominantly blurred because students have scaled down the pictures resulting in horrendous blurring.
View 3 Replies View RelatedIs there a way to change the leader arrowhead size without changing the dimension arrow/tick size?
View 9 Replies View RelatedRandom objects on my artboard tend to change dimensions and/or coordinates on its own. The difference is by a few thousandth of a decimal. I'm not sure when this happens but it's usually happening to objects I'm not working on in the moment. And once and a while an object would refuse to comply when I try to readjust the dimension or coordinates.
Why this keeps happening and what I can do to stop it?
FYI: I am using CS5 on a Macbook Pro.
I took some shots yesterday with my iPod Touch Fifth Geration and Adobe Bridge (of just by clicking on the file in Finder) shows the file size of the jpeg files at about 2.33 megs with dimensions of 1936 x 2592 or 26.9 x 36.0, 72 ppi. When I open the file in Adobe Photoshop CC, the file size is 14.4 megs with the same dimensions.
Why is there such a difference in file size?
And, after I work on the file in Photoshop and save it again AS A TIFF IMAGE without changing dimensions, but doing some work with NIK filters, Adobe Bridge now shows the new file at 14.39 megs. I know that TIFF takes up more file size than jpeg, but is there that much of a difference in file size?
I am currently updating company drawings from one template to another. I am using the copy and paste method. What I am noticing is that when I copy the part and the dimension from the original drawing ( all in 3 place dimensioning) to the new template Autocad is changing the dimensions to 4 place dimensions. First question is why is this happening and second question is can it be stopped?
View 4 Replies View RelatedI've completed a drawing, with dimensions and everything and I have to reduce it to 1:2 scale to fit my drawing frame. How do I do this without changing the dimensions? Every time I reduce it the dimensions halve as well!
View 9 Replies View RelatedWhen I save to acad my Dia dimensions are changing to a 4 place decimal. My radius dims stay the same.
INV 2009 SP 2.
I have an image, I just need to changethe text in that image without changing anything else.
View 5 Replies View Related