AutoCad 2D :: Dimensions Not Changing Size / Scale?
Mar 15, 2013
I've just recently changed jobs and so I'm working on a new (to me) system with Autocad Mechanical 2013. I had been working with Mechanical 2010.
One (of the many) issues that is bothering me, is that I can't seem to scale resize individual dimension. Normally, I'd create the dimensions and then if I needed to tweak the fit, I'd go into the Properties pallet and change the overall scale under Fit. Not really a good standard of practice, I know...
But when I do that on my current system, the dimension doesn't change at all.
On top of that, I have a weird refresh problem. If I grab a dim by the grip and move/stretch it, it doesn't actually show the new position unless I Regen. Is that a setting or maybe just a slow reaction by my computer?
View 1 Replies
ADVERTISEMENT
Aug 27, 2010
Modeling 1:1 in MS, dimensioning in PS different scaled viewports. Plotted from PS, did further work both in MS/PS and notice dimension readings have scaled up by 99.98% and 100% to what they were in hard copy. Changed dims in properties but for some reason they have reverted back to the percentage increase? For example I have a 5745mm truss span that is now a 574.5 meter spanning truss!!?? Haven’t altered dimstyle at all or any scalings. Laid another dimension again in PS along side the exaggerated one using same endpoints in order to check things and it’s fine.
Would like to know what has caused the dims to scale up in PS and, how to undo the problem, hoping not to have to re-dimension.
Attached is the dwg. and yes, I have dimensioned in MS but there was a reason. It’s PS that’s causing the grief.
View 9 Replies
View Related
Jul 4, 2013
How to scale drawing with dimension lines without changing dimensions in dimension lines? I got drawing with correct dimension lines but geometry is wrong.
View 7 Replies
View Related
May 18, 2012
So we've been sent a DWG file for a large site, that includes a massive aerial (TIF) image.
At this point it's too large to even work with so I'd like to scale it down (proportionally, so it will still maintain the same aspect ratio).
For simplicity sake, lets say the image is 15,000 x 15,000 and I want to scale it down to 5,000 x 5,000.
The problem is that AutoCAD seems to use that pixel size to determine the actual scale, so when I updated the new (smaller) image, it was also 3x smaller in the world.
How do I scale down the image independently of the size so it will still maintain the same scale in the CAD world? (I'm a 3D guy so this is akin to scaling down a texture, yet having the plane its projected on maintain its original scale.)
View 1 Replies
View Related
Jul 28, 2004
I have to process a couple of thousand photos. What I need to do is get PS to resize the canvas so that Height=Width, no matter which is the larger. In the area where it increases the canvas size, it should then have white space.
So that for a 10x5 landscape picture, it resizes to be 10x10 canvas, for a 5x10 portrait picture, it resizes to be 10x10 canvas, etc.
View 7 Replies
View Related
Jun 2, 2013
When changing brush size in CS6, I've noticed that it is has granular resolution from 0 pixels up to around 500pixels, incrementing in size very slowly. However, above 500 pixels it increases in size very rapidly, jumping to 800, 1200, 1500 and then into the 2000s.
As most of the photos that I work on have a high pixel count I find that my ideal brush size is between 400 and 1000, occasionally I use it at around 100 pixels, and occasionally at 2500.
Is there any way of changing the scale of the brush size so that it allows greater sensitivity in the 400 to 1000 range?
View 4 Replies
View Related
Apr 10, 2013
I would like to find a lisp that changes the scale of something that has an annotative scale and deletes all other scales in the object scale list. Often i have many different scales of existing dimensions or objects. i waste a lot of time opening the annotation object scale dialogue box, selecting add, finding my scale and deleting the old scale.
View 3 Replies
View Related
Sep 16, 2005
is it possible to create a gradient brush with the colors fading from black to white, and then edit the colors so instead of black fading into white, it's now black fading into transparent?
(so the pixels that were pure yellow are now completely transparent, the pixels that were slightly darker yellow are now almost completely transparent, the pixels that were dark yellow are now barely transparent, and the black pixels remain completely black.)
(I was only able to do it now because I started off with that black/transparent image)
I want to do this so I can change the color of the yellow.. I could use replace color,
What I'm basically trying to do is be able to change stuff in images/screenshots, like add a pattern to a white shirt (so, get rid of all of the white), but completely preserve the darkness of its wrinkles/shadows etc. A friend told me I should just desaturate it, then make it like 50% transparent, then duplicate it so there's 2 of those layers.. and add the new pattern behind it. But it doesn't look that good..
View 9 Replies
View Related
Feb 25, 2013
Modifying the point size/text size assigned at particular annotation scale,
I’m wondering how the point size/text size assigned at particular annotation scale can be modified.
For example, in the attached screenshot, the point size assigned at the annotation scale of 1/1000 is big and I wanted to make it a bit smaller at that scale.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 2 Replies
View Related
Aug 9, 2013
I have a serious problem with AutoCAD placing improperly scaled dimensions within viewports. I have a drawing where half of the dimensions are correctly scaled and the other half are off by as much as 4 times their value. This occurs randomly without any rhyme or reason- and sometimes occurs whenever a drawing is opened. I know of a couple of drawings that if I simply open them, a dozen dimensions will scale up to 12x their intended value. It has happened to everyone on my staff. We are using LT 2011- but I have had a similar problem using 2004 & 2007 full seats.
View 4 Replies
View Related
Jul 28, 2013
I've got .dxf files of parts that need to be manufactured, however in this instance I need to manufacture 3/4 scale versions of these parts. So far I've been simply printing the plans and using my trusty calculator to change the scale of the dimensions.
But now I've got a couple of pages in this set of plans that have over a thousand dimensions on them. It would be really cool if I could just open a dialog or enter a command and have all the dimension on the page multiplied by a scaler so I can print the plans with the correct dimensions on them.
Scaling the model has been suggested. I assume that when you scale a model that the dimensions automatically update. However, I have no idea if these .dxfs contain model information or just 2D plan data and I don't know how to check.
The second question of my post is only; Is there a way to view the actual size of the plans in auto cad? Sort of a "Display actual size" button?
View 9 Replies
View Related
Jan 11, 2013
I'd like to take a set of ordinate dimensions and multiply all the values by 10. Is this possible, without overriding the values and making them static?
The reason I'm asking is because I'm making a flat layout sketch for pockets around a drum. So imagine taking a drum and rolling it out flat. In the direction along the drum I drew it as 1" = 1" and for the circumfrence direction I did 1" = 10° so I don't have sketch that is 13" x 360". So I need to scale the dimensions in 1 direction up by 10.
View 1 Replies
View Related
May 28, 2013
I have a photograph of a house and measurements of the porch columns, windows, etc. When I scale it some of the measurements are correct while others are way off. The photo is angled a bit but I am only concerned with the porch.
porch2.jpg
View 9 Replies
View Related
Jun 22, 2011
After using autocad for a while, I got some questions i'd like to ask.
1) In my line of work, I have to label the items I draw in every CAD file, multileader is a nice tool to have but how do I keep the styles I make so that it "transfers" over to a new CAD file?
I have to keep making a new style everytime I create a new drawing. I would like for the default style to stay after I edit it.
2) Is there a way or command that lets me scale an object to exact dimensions? For example, I have a 800 by 750 table in my block library, the size I need is 950 by 820, normally I would have to explode it then stretch it manually on the x and y axis, is there a way to scale it up to 950 by 820 through a command?
3) I don't know what I hit, but I can't seem to select multiple objects just by clicking on them anymore, I now have to hold down the SHIFT key. How do I revert this?
View 1 Replies
View Related
Sep 12, 2011
I am currently working on the drawing which I initially didnt have a template for (ie the border for the A1 page this drawing will be printed on) so off I went and started drawing using a scale of 1 drawing units = 1mm.
Now I have been given the border and the drawing I have comes no where near fitting on the sheet so I want to select all of the drawing and change the scale but I obviously don't want the dimensions to change. How can I achieve this?
I also need to know as there are certain parts of the drawings that need zoomed in views so all I want to do is copy the parts I have drawn and increase the scale but again keep the dimensions the same.
View 9 Replies
View Related
Aug 8, 2013
When I try to scale a part in Autodesk Inventor Fusion, it asks to select a solid body, and reference point, but there is no option to change the scaling type to nonuniform. How to do it? I have Autodesk Inventor and Autodesk Inventor Fusion 2013.
View 2 Replies
View Related
Mar 16, 2012
IN this drawing, I want the 9.00 to be either 4 ( feet) or 48 (inches).
How do I set the correct scale in this or any drawing?
View 3 Replies
View Related
Jul 19, 2012
I have a drawing from an outside source which was not drawn to scale, and dimensioned in MS.. When trying to scale the drawing to 1:1, the dimensions lose their contents. When looking at the properties, the contents of the override do not jive with what is actually shown, and any attempt to edit, move, copy/paste, or scale the dimensions will delete the contents. I have not come across anything like this before. Drawing attached...
weird dimensions.dwg
View 9 Replies
View Related
Mar 24, 2009
Is there a way to change the leader arrowhead size without changing the dimension arrow/tick size?
View 9 Replies
View Related
Jun 21, 2011
I am using AutoCAD 2011. my scale being off for text, dimensions, inserting scalable blocks, xrefs, etc...
The problem is that when inserting, or creating text (or any of the above) in architectural scales everything is fine, however, when the scale is changed to an engineering scale, everything comes in at 1/12 the scale it is supposed to be - i.e. - when I create text it has to be scaled up by 12, it's like AutoCAD is just reading the 200 scale and not multiplying by the scaler of 2400.
View 9 Replies
View Related
Oct 9, 2012
Why the “dimensions” doesn’t respond as the “annotation scale” changes…
I’m wondering why the “dimensions” doesn’t respond as the “annotation scale” changes when the “Automatically add scales to annotative objects when the annotation scale changes” is OFF?
View 6 Replies
View Related
Oct 31, 2012
How can I set the multiple dimensions "ordinates" to scale correctly in base views. The old vanilla ordinate dims work fine, but power dims ordinate give me improper scaling.
View 2 Replies
View Related
Jul 19, 2012
I am currently updating company drawings from one template to another. I am using the copy and paste method. What I am noticing is that when I copy the part and the dimension from the original drawing ( all in 3 place dimensioning) to the new template Autocad is changing the dimensions to 4 place dimensions. First question is why is this happening and second question is can it be stopped?
View 4 Replies
View Related
Mar 26, 2012
I've completed a drawing, with dimensions and everything and I have to reduce it to 1:2 scale to fit my drawing frame. How do I do this without changing the dimensions? Every time I reduce it the dimensions halve as well!
View 9 Replies
View Related
May 3, 2012
When I save to acad my Dia dimensions are changing to a 4 place decimal. My radius dims stay the same.
INV 2009 SP 2.
View 1 Replies
View Related
Jun 21, 2013
At times when I am dimensioning a dwg in paperspace one of the dimensions will assume the viewport scale when the dwg does a regen. Its as if the DIMLFAC will be set to something other than 1but its only for one or two dimensions. I check the DIMLFAC var for thje dwg and its set properly to (1). Since I am dimensioning in paperspace i have the DIMASSOC set to (2).
As you can imagine this is a huge problem when I send the dwg out for fabrication. What is the problem and how can I stop this from happening on random dwgs to random dimensions?
View 5 Replies
View Related
Oct 31, 2013
We recently added one license of LT 2014, and the Explode command works differently than before with dimensions.
Using the standard filled arrowhead, the arrows now explode into unfilled triangles. In past versions it's always exploded into the filled arrowhead, just like it was when created.
Can't find any option to alter the way Explode works.
View 3 Replies
View Related
Feb 11, 2013
I'm having a bit of trouble getting my polygon closed without changing the dimensions of the polygon.The drawing attached or at URL....
However I do not know the radius of the angles A, B and C. I know that all the lines have to be the dimensions marked.
Can Autocad automatically bend the angle say, at A without changing the dimensions in order to complete the polygon? I tried this URL.... but found it wasn't what I wanted.
View 4 Replies
View Related
May 10, 2013
I am on ACAD 2012 overlaying dimensions in paperspace to objects in model space..The dimensions keep changing to an incorrect number..Can't identify when it is happening yet. The dimensions are always larger
If I change dim style and back again the correct dimension appears. I can then matchprop to get the other dimensions to appear correctly. But twenty minutes later they are all changed again
I turned of Annotative scale for dimension features and use overall scale of 1.
View 8 Replies
View Related
Jun 16, 2011
Using 2012. On pre-07 versions I've used, I could change the style of all dimensions in a drawing by selecting all entities (or using window selection) and then selecting the new dimension style from the combo box, regardless of what layers or entities were selected. Any dimension within that selection gets changed to the new style selected. In 2012, if I select any entity that isn't a dimension, no dimensions styles appear in the combo box, and so this method doesn't work.
Is there some new setting preventing this from working?
View 2 Replies
View Related
Jul 18, 2012
I am working on the AutoCAD 2009 version. I was sent a plan by email that is in 1:80 scale. My boss wants it in 1:100.
View 2 Replies
View Related
