I am currently updating company drawings from one template to another. I am using the copy and paste method. What I am noticing is that when I copy the part and the dimension from the original drawing ( all in 3 place dimensioning) to the new template Autocad is changing the dimensions to 4 place dimensions. First question is why is this happening and second question is can it be stopped?
View 4 RepliesI am using Mech 2007. I have created a template to use with new drawings, and want to know if there is a way to update all the drawings at the same time when updating the template.
View 3 Replies View RelatedI have a block that has to be update in a bunch of drawings -more than 20-. I updated in only one drawing, apply coy paste to the following but the block does not update in the drawing that I am pasting my new block. How is possible to update this block in the following 19 drawings?
View 4 Replies View RelatedMy issue is that whenever I edit a sub-assembly or a part within an assembly, whether it's from within the assembly by right clicking and choosing "edit" or by opening the sub-assembly/part and editing it separately, once I return to the top assembly, it does not update constraints to reflect the changes. Say I constrain the top of a part to be flush with something in the assembly. Then I edit the part and make it shorter. Once I return to the assembly, the part has shortened but it is no longer flush as it was meant to be. It is lower with respect to the plane it should be flush to. If I double-click the "flush" constraint and then click the check mark, it's like it reminds Inventor the constraint is there and the part hops up where it should be.
Is there any way I can click an "update" button or something so Inventor automatically checks for part changes and re-constrains everything after I make changes to sub-assemblies or parts? I found a "Refresh" button and added it to my Quick Access Toolbar, but it does absolutely nothing.
I often have the same issue with sheets in my .idw files; they do not update once I edit a .ipn or another view in the sheet. Is there a similar solution for this instance as well?
recently switched over to AutoCAD 2013 from 2012. A time svae feature I used extensively in 2012 was the auto update feature for dimensions. My workflow is to set up a base plan then xRef that plan to my various sheets where needed in viewport in paperspace. If I set my DIMASSOOC to (2) and then dimension in paperspace I was able to auto update the dimensions with any changes by simply double clicking in the viewport window then switching back to paperspace. I have spent some time researching this feature today without any answers. Would this be just a bug in the new version or is it a feature that has been disabled?
View 4 Replies View RelatedA few weeks ago I created an iPart for a custom flange with various sizes, today I have added a new row to the family for a new size. Most of the dimensions work fine but two of them are not translating to the sketch/model from the table.
All dimensions that are working correctly lie on one sketch and the dimensions that are not changing correctly are on a seperate sketch.
The flange is made from a single revolve and then the bolt holes were added seperately as a single extrusion which was then patterned.
The dimensions are correct on the family table but are incorrect when I go into the particular parts parameters.
(I am using IV 2014)
I create a hole feature in part and use Hole and Thread function in drawing view. All info displayed correctly, but if the model changes - note does not! the only way to get the new thread/hole designation is by using the Hole and Thread function again.
see print screen attached - I kept changing the model and using Hole and Thread tool couple of times. They all point to the same hole but look at the results..
Reboot does not work...
Autodesk Inventor 2012 Professional x64 SP2
Win 7 x64, Intel i7 930, 6GB PC-1600, Quadro FX-1800, 250 Gb 10k RMP
For the past 2 days when I switch from one drawing to another, my layout tabs are not updating and stay the same as the previous drawings. I have to do a regen to get the proper tabs in place. All the layouts are there...it is just the tabs that are messed up. Once I click on one of the tabs they straighten themselves out as well, but on that first selection I never get the correct drawing that I want!
View 6 Replies View RelatedI have several parts which I wish to modify, but, those modifications are only being done to get some prototypes made. I do not want the changed (non-approved part) to be used in current issue drawings, assemblies etc. until I have proven the modifications and am happy with them.
I can do this by doing a save as on the part and could just replace the previous design, but then I lose the history of changes/revisions shown in Vault which is critical to me and part of using vault in the first place.
I am having trouble with dimensions disappearing in the drawing when I update my model.
I add the correct dimensions then when I update my model, all dimensions on the drawing disappear and I have to make them all again.
A little more info:
I am using the tube and pipe feature to drawing tubing inside of an assembly.
Process:
1) I draw the tubing routes and populate them (to show an actual swept tube)
2)Right click on the newly created route in the explorer and open the tube.
3)File->new->drw.
4)Add necessary dimensions to the tube drawing.
5)Save and close drawing
Up until this point everything is fine.
6)Edit the tube route in the assembly and save
7)Upon opening the drawing of that tube route ALL dimensions have disappeared.
I am using it for producing 2D drawings for some simple prototyping.
I am having trouble with two things - Adding dimensions for when I print the image. At the moment I can add dimensions using the constraint tool but I cant seem to find a way to add concise dimensions specifically for printing.
Also is there a feature or a format that I can make 2d images specifically for printing? Perhaps there is a file format?
I am having a problem when adding dimensions to my drawings.
The problem is when adding either radius dimension or diameter dimension. When adding dimensions to circles the dimension line goes right through the middle of the circle rather than just touching the edge.
How can i hide the dimensions on the drawing in autocad 2013....screen is cluttered so hiding the dimensions will keep the screen cleaner.
View 2 Replies View RelatedHow do I show dual dimension in Inventor drawing?
View 5 Replies View RelatedI am new to inventor and from a Solidworks background so parts are similar to me.
I am also new to my workplace and part of my job is to clean up and produce some of our CAD files. We are missing drawings from design documentation and I have decided to start there.
How do am I able to add Dimensions into .idw files other than the Retrieve dimensions function?
In other words how can I add dimensions at will?
My boss wants me to look into using annotative text and dimensions for all our drawings. Currently, we have 15 different text and dimension styles depending on what scale we're using.
However, despite my extensive knowledge in most areas of AutoCAD, I have absolutely NO knowledge of how to use it.
For some reason my dimensions are exploded automatically in some of my drawings. (The arrows and lines are not connected) Only certain drawings though-other drawings are perfectly fine. I've tried pasting dimensions into the drawings and that doesn't work!!
View 4 Replies View RelatedI am having trouble when editing dimensions in idw drawings.An example being that i wish to change the dimension text
40 to read "40x45 CHAM." When i right click the dimension and go into text the format text box opens but when try to change what it is inside the chevrons and replace it with my new text then this does not seem to work.
I used the options dialog to make new dimensions associative. However, when I open some older drawings the checkbox is empty. Is this option stored with each drawing? If so, is there a way to change this setting for multiple drawings at once?
View 2 Replies View RelatedDRAWINGS: I need to prepare a plan view of a complex part, which incorporates many different (parallel) heights. In the drawing, all of these faces are parallel to the plane of the drawing itself. There are far to many of them to show their heights using section views. The usual drawing convention in this case is to simply indicate each face on the drawing, and then express its height relative to a reference plane.
Until now, I have been doing this simply by measuring a height from the part, and then indicating it on the drawing by adding leaders and text, which:
1. Is extremely laborious
2. Obviously has no intelligent link to the actual part/drawing
My breadth of knowledge in CAD is not huge, but I know that in Gibbscam, for example, after setting the position of the origin in 3 planes, if I then pass the cursor over any parallel plane in the z direction while pressing alt, I will get the distance of that plane from z=0.
What I want is the possibility in Inventor to select a face in a drawing, which is in the same plane as the drawing, and straight away be given it's height relative to a parallel reference plane. Such a value should then update intelligently on the drawing if I modify that same height on the part.
I frequently use tolerance and fits when modelling and retreive them to use them in drawings. The text on these dimensions is always horizontal . Any time I have vertical dimension on drawings (e.g. several diameters in a stepped bore) the horizontal text takes up way too much real estate. e.g. 18.0000 g6 (17.999 17.998)
I would like to align the text to the dimension lines (i.e. text vertical in this case) In Properties Rotate is greyed out. Is there a way to keep my retrieved dims and have them aligned with the dim lines in the drawing?
I noticed some errors in certain table entries in an i Feature of mine after I had already started creating parts using it. I've updated the table and when I add new instances of the feature to my part they work fine, but the existing instances of it stay the same size. Is there any way to force the existing instances to update?
The i Feature in question is a sketch and I'm using Inventor 2012, if either of those is relevant.
I already have a code below that will read a bunch of drawing filenames that will go into each drawing, save the drawing, (print the drawing but I have this disabled for now,) close it, then move onto the next one.
What I want to do is add reference brackets around every dimension on each drawing. I have managed to update part list styles before using ilogic but I am not sure if it is possible with dimensions.
question = MessageBox.Show("Are you sure you want to update multiple drawings? If so, make sure all drawings are checked out.", "Batch Drawing Update",MessageBoxButtons.YesNo,MessageBoxIcon.Question)
'set condition based on answer
If question = vbNo
Exit Sub
End If
[Code] ......
re-creating the logo I've attached from scratch so I have more control over the design elements.
I want to remove the "black box" background, I need to change the color and size of the type, and I want to change the aspect ratio of the entire logo so that it stretches wider and is not quite as tall.?
I'm an intermediate PS user, but don't have much experience with type effects.? If someone would be willing to walk me through the process of recreating this, I would be very grateful!? (Note, I'm mostly talking about the text effect... I think I could handle the red line and possibly cloning the sun and flowers out,
drawings that I download from commercial vendors, (Grainger, McMaster, etc). I figured out how to get access to them: When I convert them from .DXF to .DWG. it somehow allows me to correctly dimension them.
One more problem I have with these drawings is that although I can edit them, one of the most important things I need to be able to do is change the layer they're on. I can't figure out how. I usually use the "Change to Current Layer", LAYCUR, command, but it doesn't seem to work for these commecially downloaded drawings.
They're always in "Layer 0". I've created multiple other layers that I need them in, but I can't get them to move. When I select them and then click on the Change to Current Layer button, they just don't move. 'm drrawing in Model Space.
I've completed a drawing, with dimensions and everything and I have to reduce it to 1:2 scale to fit my drawing frame. How do I do this without changing the dimensions? Every time I reduce it the dimensions halve as well!
View 9 Replies View RelatedWhen I save to acad my Dia dimensions are changing to a 4 place decimal. My radius dims stay the same.
INV 2009 SP 2.
I've just recently changed jobs and so I'm working on a new (to me) system with Autocad Mechanical 2013. I had been working with Mechanical 2010.
One (of the many) issues that is bothering me, is that I can't seem to scale resize individual dimension. Normally, I'd create the dimensions and then if I needed to tweak the fit, I'd go into the Properties pallet and change the overall scale under Fit. Not really a good standard of practice, I know...
But when I do that on my current system, the dimension doesn't change at all.
On top of that, I have a weird refresh problem. If I grab a dim by the grip and move/stretch it, it doesn't actually show the new position unless I Regen. Is that a setting or maybe just a slow reaction by my computer?
How do I put dimensions onto working drawings, making them ready for printing?
View 4 Replies View RelatedI am trying to change text in hundreds of drawings. What I have is a line of text say "the brown fox" and I need to change it to "the black dog". I have probably 1500 drawings I need to do this in. I am not versed in scripts of lisp. I know the ACAD commands to do this but could develop a script file to batch this.
View 3 Replies View RelatedModeling 1:1 in MS, dimensioning in PS different scaled viewports. Plotted from PS, did further work both in MS/PS and notice dimension readings have scaled up by 99.98% and 100% to what they were in hard copy. Changed dims in properties but for some reason they have reverted back to the percentage increase? For example I have a 5745mm truss span that is now a 574.5 meter spanning truss!!?? Haven’t altered dimstyle at all or any scalings. Laid another dimension again in PS along side the exaggerated one using same endpoints in order to check things and it’s fine.
Would like to know what has caused the dims to scale up in PS and, how to undo the problem, hoping not to have to re-dimension.
Attached is the dwg. and yes, I have dimensioned in MS but there was a reason. It’s PS that’s causing the grief.