I am having trouble when editing dimensions in idw drawings.An example being that i wish to change the dimension text
40 to read "40x45 CHAM." When i right click the dimension and go into text the format text box opens but when try to change what it is inside the chevrons and replace it with my new text then this does not seem to work.
How do I show dual dimension in Inventor drawing?
View 5 Replies View RelatedI am new to inventor and from a Solidworks background so parts are similar to me.
I am also new to my workplace and part of my job is to clean up and produce some of our CAD files. We are missing drawings from design documentation and I have decided to start there.
How do am I able to add Dimensions into .idw files other than the Retrieve dimensions function?
In other words how can I add dimensions at will?
DRAWINGS: I need to prepare a plan view of a complex part, which incorporates many different (parallel) heights. In the drawing, all of these faces are parallel to the plane of the drawing itself. There are far to many of them to show their heights using section views. The usual drawing convention in this case is to simply indicate each face on the drawing, and then express its height relative to a reference plane.
Until now, I have been doing this simply by measuring a height from the part, and then indicating it on the drawing by adding leaders and text, which:
1. Is extremely laborious
2. Obviously has no intelligent link to the actual part/drawing
My breadth of knowledge in CAD is not huge, but I know that in Gibbscam, for example, after setting the position of the origin in 3 planes, if I then pass the cursor over any parallel plane in the z direction while pressing alt, I will get the distance of that plane from z=0.
What I want is the possibility in Inventor to select a face in a drawing, which is in the same plane as the drawing, and straight away be given it's height relative to a parallel reference plane. Such a value should then update intelligently on the drawing if I modify that same height on the part.
I frequently use tolerance and fits when modelling and retreive them to use them in drawings. The text on these dimensions is always horizontal . Any time I have vertical dimension on drawings (e.g. several diameters in a stepped bore) the horizontal text takes up way too much real estate. e.g. 18.0000 g6 (17.999 17.998)
I would like to align the text to the dimension lines (i.e. text vertical in this case) In Properties Rotate is greyed out. Is there a way to keep my retrieved dims and have them aligned with the dim lines in the drawing?
I already have a code below that will read a bunch of drawing filenames that will go into each drawing, save the drawing, (print the drawing but I have this disabled for now,) close it, then move onto the next one.
What I want to do is add reference brackets around every dimension on each drawing. I have managed to update part list styles before using ilogic but I am not sure if it is possible with dimensions.
question = MessageBox.Show("Are you sure you want to update multiple drawings? If so, make sure all drawings are checked out.", "Batch Drawing Update",MessageBoxButtons.YesNo,MessageBoxIcon.Question)
'set condition based on answer
If question = vbNo
Exit Sub
End If
[Code] ......
Since day 1 when I place a dimension in sketch mode, it immediately goes to edit so I can type the number in. Suddenly yesterday it stopped editing and I have to click a few more times to type the number in. It's totally messing up my work flow and whatnot. The option in application options is checked as well.
View 4 Replies View Related(in Inventor) sometimes I am beset with a problem that I want to edit my sketch but sketch members like line(s),circle(s) are moving to dimensions which I don't want. The sketch is moving. How can I overcome this problem,
View 9 Replies View RelatedI am using it for producing 2D drawings for some simple prototyping.
I am having trouble with two things - Adding dimensions for when I print the image. At the moment I can add dimensions using the constraint tool but I cant seem to find a way to add concise dimensions specifically for printing.
Also is there a feature or a format that I can make 2d images specifically for printing? Perhaps there is a file format?
I am having a problem when adding dimensions to my drawings.
The problem is when adding either radius dimension or diameter dimension. When adding dimensions to circles the dimension line goes right through the middle of the circle rather than just touching the edge.
I am currently updating company drawings from one template to another. I am using the copy and paste method. What I am noticing is that when I copy the part and the dimension from the original drawing ( all in 3 place dimensioning) to the new template Autocad is changing the dimensions to 4 place dimensions. First question is why is this happening and second question is can it be stopped?
View 4 Replies View RelatedHow can i hide the dimensions on the drawing in autocad 2013....screen is cluttered so hiding the dimensions will keep the screen cleaner.
View 2 Replies View RelatedMy boss wants me to look into using annotative text and dimensions for all our drawings. Currently, we have 15 different text and dimension styles depending on what scale we're using.
However, despite my extensive knowledge in most areas of AutoCAD, I have absolutely NO knowledge of how to use it.
For some reason my dimensions are exploded automatically in some of my drawings. (The arrows and lines are not connected) Only certain drawings though-other drawings are perfectly fine. I've tried pasting dimensions into the drawings and that doesn't work!!
View 4 Replies View RelatedI used the options dialog to make new dimensions associative. However, when I open some older drawings the checkbox is empty. Is this option stored with each drawing? If so, is there a way to change this setting for multiple drawings at once?
View 2 Replies View RelatedI need to change a text item in about 200 drawings. I would rather do this at one time if at all possible.
View 4 Replies View RelatedI typically as much as possible like to insert my dimensions into my drawing from my model.
I created holes in the model as a 1/4" tapped hole
Yet when I show the dimensions in the drawing they show the minor dimension.
How do I get the 1/4" to show? I have selected the feature and still get these results.
is there a way to lock the dimensions to aligned dimensions...or a key i could hold while dimensioning that would do that..
i have to dimensions a drawing where theres a lot of aligned dimensions to put and to do it manualy each time takes forever...
Product Design Suite 2013
How do I put dimensions onto working drawings, making them ready for printing?
View 4 Replies View RelatedI have a cylinder with an 18mm diameter.
I export my ipt to an stl (and I make sure that I click on options before I convert and make sure the units are in mm) yet the units are still off. I am using Inventor 2013.
It seems like most people were able to solve their problem by clicking on options but even that seems like it is not working for me.
All of the sudden after I sketch a rectangle i need 8 dimensions instead of 4. how do I get it back to only needing 4?
View 6 Replies View RelatedI was adding a lot of aligned dimensions to a drawing and some where along the way they changed from aligned dimensions to rotated dimensions, even in the same string of dimensions.
View 9 Replies View RelatedI'm using ACAD LT 2008.
When i try to copy paste some drawing entities from a heavy drawing file to any other file, the program blocks and says 'not responding', endlessly. So i always have to shutdown the program. I experience the same problem using the designcenter: when I try to copy a layout into another drawing, my computer gets stuck.
Another annoying problem with these files is that they are so heavy, while in fact they shouldn't be. I tried the aectoacad file command. In result the file id half as big, but after I open it and save it, again is the original size.
Is there any way I can make exploded dimensions in an old drawing become live dimensions again.
View 3 Replies View RelatedWhile making a drawing and there is something which I want to turn visibilty of for a while, I will select from a sub-menu "Visibility" (see the attachment) But what I must do if I want to turn the visibility on again for example to that hole shown in screen shot?
View 2 Replies View RelatedI want to draw operation drawings, I think, ı must do this like that; I must draw one ipt, and later I must draw drawings from this ipt, and idw's
1.drawing (operation); rectangular prism,
2.drawing (operation); rectangular prism and rectangular cutting,
3.drawing (operation); rectangular prism, rectangular cutting and hole,
4.drawing (operation); rectangular prism, rectangular cutting, hole and hexagon cutting,
when I change dimensions of rectangular prism, all four operation drawings must change, so I can't change location of end of part in idw's browser, but I can change location of end of part in ipt's browser, I want to change location of end of part in idw's browser, can I do this? or alternative solution...
I don't want to make, four ipt for each operations... I added a picture...
Autodesk inventor Design Suite Premium 2012
Windows 7 x64, 750 GB harddisk
Intel core i5 Cpu @3.2 GHz, 8 GB Ram,
nVidia Quadro 2000 D Graphics Card
know if we could put for example the Building of our Assembly in some 2D drawings as a "Reference" object and as a non reference object in other 2D drawings?
In some 2D drawings we don't need the whole building, and just with the references is enough, but in some other views, we need to see the building so we can represent the real obstacles we have or to show how the custumer should do the pipe implantation
I am slowly learning about ilogic, and have created parts and assemblies that are run by rules. My next question is, what exactly can ilogic do for drawings? I've looked at the wikihelp, but I am not a natural at programming and I need more than a list of functions with brief descriptions to get me started.
I'm looking for code snippets, other discussions, tips, tricks, and/or tutorials to get info what I can do with ilogic and the API that can automate parts of the drawing process.
The solutions that I have found to get an assembly bom on an assembly drawing are:
1. insert an assembly into an assembly.
2. make a virtual part or derived part.
3. make extra fields in the part and have the BOM column look at alternative iproperty fields.
In a part file that has a family table I want the configurations of some casted parts and some machined parts. the casted parts will have a drawing but no BOM, the machined parts will have a drawing and a BOM.
Then in an assembly file that has a family table I want configurations that use the configurations of the part file. Each of these assemblies will have a drawing that has a BOM that will call out the part that is is made from.
In other words I will have a casting that will be machined so I will need a casting drawing and a machine drawing that has a BOM telling what casting to use.
On top of that when I try to make a family table in an assembly I get a message "THE BILL OF MATERIALS CONTAINS VIEWS OR PROPERTIES NOT SUPPORTED BE CONFIGURATIONS. OONLY STRUCTURED FIRST LEVEL BOM VIEWS ARE SUPPORTED. THE BOM WILL BE CHANGED DURING CONVERSION".
With iAssemblies is it possible to somehow also generate a dwg from it as well? Or would you have to use copy design?
So... depending on the configuration, I would need a main assembly drawing, and a few detail dwgs.
I thought when you created a part and filled out the iproperties description field and created a drawing of that part that the parts list would read the iproperties description field and put that in the parts list description field.
Then when you create an assembly that included that part and filled out the iproperties description field in the assembly and created a drawing of that assembly that the parts list description field would be filled out be the assembly iproperties description field.
Instead the description field of the parts list in the assembly drawing is filled out using the iproperties description field of the part not the assembly.