With iAssemblies is it possible to somehow also generate a dwg from it as well? Or would you have to use copy design?
So... depending on the configuration, I would need a main assembly drawing, and a few detail dwgs.
We have a product line that relies heavily on iAssemblies. The main assembly and several layers of subassemblies are all iAssemblies. All the children that needed to be generated so far were added to the vault.
If I activate a different member in the main assembly factory, Inventor wants to update some of the various children. For some reason, vault won't prompt me to check out the children. I get a variety of errors, unless I manually check out the children.
There are at least 20 iAssemblies involved at different levels of this thing, not to mention all the iParts thrown in as well.
I have a large library of standard parts and assemblies that I will be migrating from Inventor 2009 to Inventor 2013
Residing in this library are iparts and iassemblies. Both the factory and the members.
Question is how to migrate these iparts and iassemblies,.
option 1 migrate the factory first THEN the members
option 2 migrate the members then the factory (pretty sure this will not work)
option 3 migrate both factory and members at the same time
option 4 migrate the factory and generate new members (not my favorite option)
option 5 ?????
I should add that I intend to use task scheduler to migrate the files
Inventor 2010
I am finding it difficult to find good through examples of how to use iLogic with iParts and iAssemblies. I have been through several of tutorials, but can't seem to find examples for what I need. Here is a link to a video to give you a bit of an idea of what I am trying to do. How/when and what snippets to use in order to get the iParts and iAssemblies to function properly.
See Video : [URL].....
First video went to long here is the rest.. [URL].......
One thing I think I mentioned in the last video, but not sure I explained it well, is that instead of having the main file name show up in the browser..the part name shows up. When I go to change parts using a form I created it keeps telling me it can't find the current part.
With the iAssembly I created I now have a message when I open the drawing informing me that i need to regenerate the factory. This terminology is new to me and I have not been able to accomplish this task. I have opened the assembly, selected manage, and updated the assembly with each of the iAssemblies active.
View 3 Replies View RelatedWe are currently still using Inventor2010. I realize that we are using a later version (trying to get boss to allow us to upgrade). I was wondering if that is where our issues stem from. At times when we create iAssemblies we have issues in which objects disappear and/or inventor crashes whenever we switch the tree to a different part number. If we try to place a sub-assembly file into an assembly file some parts seem to disappear. As a work around we have tried to place all components separately (omitting the sub-assembly file), and the file will still crash or objects disappear. Some of our files get a little large, but aren't really to complex. We have been having issues with this one file in particular and it has been redone several times by different users, on different work stations.
View 1 Replies View RelatedIt has to do with iparts and iassemblies and “save copy as”. My concern is that during the concept stage an engineer may be working on a design and will create an ipart, as many of our designs have multiple versions. They now want to keep a copy of that ipart, and try something new so they “save copy as” and create a new file. The new ipart members all have the name reference to the first design. Does renaming those members redirect the path to the new ipart, or should we avoid designing like this all together?
View 5 Replies View RelatedSo I've got an iAssembly and I made a drawing and I want to show all the parts. I have read in other threads that it will not let you show a Parts Only list from an iAssembly. Why do iAssemblies not let you do this? Seems like a bit of an oversight to me but I'm sure there's some technical reason.
IV2012
Windows XP SP3 32-bit
Intel Core 2 Duo 6400 @ 2.13 GHz
Nvidia Quadro FX 3450/4000 SDI 256MB Vram
2 GB Ram
160GB HDD
Is there any good documentation/workflows/suggestions,etc.. about using and implementing Vault with iparts/iassemblies?
We are finally going to move to using Vault (finally got a drafter to do the "dirty work") and I keep seeing/hearing horror stories/issues about using Vault with iparts/iassemblies.
Typically all of my top level products that we sell are iassemblies (we always each make products in 3 different flavors/3 different voltages). Each of those iassemblies includes at least 1 sub that is also an iassembly. Each of those sub-iassemblies contains at least 1 ipart.
I'm just can't find enough information about the proper way to handle/check in/migrate/manage,etc... this stuff when we move to Vault. But I do find lots of posts about how Vault can't handle iparts/iassemblies correctly but I assume thats just improper setup/workflows.
I have made an iAssembly with a main body and flanges attached to the body.
Assembly feature holes have been created act on the main body, and these holes are relative to the position of the flange.
When I change the factory member - the position of the flange changes, but the holes stay in the last location and so the model is wrong.
The only way to overcome this error, is if I go to the Manage tab and manually select 'Rebuild All'.
I need this to work automatically as drawings are generated wrong when changing model state.
My intention is that this will be used in an iLogic routine, linked to an external sales package.
Nesting phantom iAssemblies within another iAssembly? We are having a problem with the BOM not generating the correct multi-item parts lists. Even though the individual iAssemblies act correctly when viewing there individual BOMs, when these parts are nested inside another iAssembly and switched (Table Replace) between individual items, the BOM shows all dash numbers as the current active one.
Any unresolved issues within iAssemblies and the BOM?
I have made a family of weldments. I am having trouble controlling the visibility of the weld symbols when I place one of these members. On some members the welds are shown and on others they are not. I know that I can turn off all the welds (View>Object Visibility> Weld Symbols) but there are other weld symbols in the assembly that I need/want to leave visible. In the image below all three weldments have the same welds, but the weld symbol of only the one is shown when I place it in an iam.
In each member of the iassembly, I have unchecked the visibility under the Welds node, but some are still visible when i place them, so that must not be controlling it. Sure would be good if visibility of welds were controlled by view representation.
Windows 7 x64 -12 GB Ram
Intel i7-930 @ 3.60ghz
nVidia GTS 250 -1GB (Driver 301.42)
INV Pro R2013, SP1.1
Vault Basic 2013
I am venturing into a new area with my iLogic coding. Looking for some good examples or How-To of how to use iLogic with iParts and iAssemblies.
View 1 Replies View RelatedI have created an iAssembly which contains 4 assembly variations. I now want to create an assembly drawing for these variations.
In this case all my assembly variations will have the same assembly part number as essentially they are all the same assembly except for a few "change over parts".
I intend to have one drawing with multiple sheets. Each sheet will have one variation of the assembly on it with a BOM for that specific variation. The problem I am having though is that the drawing BOM for each variation are linked and as a result each drawing has an inconsistant item numbering (for someone in the workshop who doesnt understand the CAD package and iAssemblies - They ask the question: Why are you skipping item numbers in the BOM's)
Is there any way I can get each BOM to show the item numbers sequentially? I tried editing the drawing BOM item number but the problem is that method propogates the item number changes to all the other BOM's as well.... (It is also tedious AND in my opinion it is generally bad practice to edit the BOM at the drawing level)
Using Inventor 2012. I have created a parts list in my .idw that is tied to a .iam Assembly file. In the .iam file I have two instances of the assembly, where one hides certain parts, the other hides others. I can manually tell the parts list which instance I want it to read (see attached image), however, is there a way to have it update automatically? I.e. when I go in to my .iam file and activate one or the other, save the file, then the parts list will auto update itself to include the correct items? Everything else from part names to iProperties auto update in the list, so I'm curious if it can read the correct assembly instance.
View 4 Replies View RelatedSee attached.
I no longer have the option to edit iparts or iassemblies via speadsheet (excel). I'm using Excel 2007. (INV 2012 Sp1)
Is excel functionality part of an addin that I might have turned off accidentally?
I believe it was working in 2012 but haven't really noticed it not working till after Sp1 install till now..
Running 2014 Product Design Suite Ultimate
Windows 7 64 bit
90G OCZ SATA 3 SSD
Core I7 920 processor, ATI HD6970 graphics card, 12G Corsair RAM
I'm using ACAD LT 2008.
When i try to copy paste some drawing entities from a heavy drawing file to any other file, the program blocks and says 'not responding', endlessly. So i always have to shutdown the program. I experience the same problem using the designcenter: when I try to copy a layout into another drawing, my computer gets stuck.
Another annoying problem with these files is that they are so heavy, while in fact they shouldn't be. I tried the aectoacad file command. In result the file id half as big, but after I open it and save it, again is the original size.
While making a drawing and there is something which I want to turn visibilty of for a while, I will select from a sub-menu "Visibility" (see the attachment) But what I must do if I want to turn the visibility on again for example to that hole shown in screen shot?
View 2 Replies View RelatedI want to draw operation drawings, I think, ı must do this like that; I must draw one ipt, and later I must draw drawings from this ipt, and idw's
1.drawing (operation); rectangular prism,
2.drawing (operation); rectangular prism and rectangular cutting,
3.drawing (operation); rectangular prism, rectangular cutting and hole,
4.drawing (operation); rectangular prism, rectangular cutting, hole and hexagon cutting,
when I change dimensions of rectangular prism, all four operation drawings must change, so I can't change location of end of part in idw's browser, but I can change location of end of part in ipt's browser, I want to change location of end of part in idw's browser, can I do this? or alternative solution...
I don't want to make, four ipt for each operations... I added a picture...
Autodesk inventor Design Suite Premium 2012
Windows 7 x64, 750 GB harddisk
Intel core i5 Cpu @3.2 GHz, 8 GB Ram,
nVidia Quadro 2000 D Graphics Card
know if we could put for example the Building of our Assembly in some 2D drawings as a "Reference" object and as a non reference object in other 2D drawings?
In some 2D drawings we don't need the whole building, and just with the references is enough, but in some other views, we need to see the building so we can represent the real obstacles we have or to show how the custumer should do the pipe implantation
I am slowly learning about ilogic, and have created parts and assemblies that are run by rules. My next question is, what exactly can ilogic do for drawings? I've looked at the wikihelp, but I am not a natural at programming and I need more than a list of functions with brief descriptions to get me started.
I'm looking for code snippets, other discussions, tips, tricks, and/or tutorials to get info what I can do with ilogic and the API that can automate parts of the drawing process.
The solutions that I have found to get an assembly bom on an assembly drawing are:
1. insert an assembly into an assembly.
2. make a virtual part or derived part.
3. make extra fields in the part and have the BOM column look at alternative iproperty fields.
In a part file that has a family table I want the configurations of some casted parts and some machined parts. the casted parts will have a drawing but no BOM, the machined parts will have a drawing and a BOM.
Then in an assembly file that has a family table I want configurations that use the configurations of the part file. Each of these assemblies will have a drawing that has a BOM that will call out the part that is is made from.
In other words I will have a casting that will be machined so I will need a casting drawing and a machine drawing that has a BOM telling what casting to use.
On top of that when I try to make a family table in an assembly I get a message "THE BILL OF MATERIALS CONTAINS VIEWS OR PROPERTIES NOT SUPPORTED BE CONFIGURATIONS. OONLY STRUCTURED FIRST LEVEL BOM VIEWS ARE SUPPORTED. THE BOM WILL BE CHANGED DURING CONVERSION".
I thought when you created a part and filled out the iproperties description field and created a drawing of that part that the parts list would read the iproperties description field and put that in the parts list description field.
Then when you create an assembly that included that part and filled out the iproperties description field in the assembly and created a drawing of that assembly that the parts list description field would be filled out be the assembly iproperties description field.
Instead the description field of the parts list in the assembly drawing is filled out using the iproperties description field of the part not the assembly.
Every now and then I go back and try to use publish to speed up printing but I always go back to plotting one by one.
I work in a housing construction office and I have 10 separate drawings side by side in model space for house plans that I need plot separate to give to certain people. My problem isn't that I can't publish them separately its that I can't save them over existing pdf's individually predetermined.
Q1. do i just have to go through and change every layout name before or after i publish?
Q2. how do i change the output publish location?
Q3. can each layout be saved to a different existing pdf and remember it?
Q3. can i save these setting across to a new drawing?
I have an assembly that is a general model with different modules that all are iAssemblies.
With this model I can speed up the design process at the company I am working for.
In the model I only choose the correct member for the iAssemblies and the assembly updates correctly and just with a couple of clicks I have made a configuration of all the modules.
Now, I would like to take it a step further and have the drawing, for the specific configuration, generated automatically.
In the drawing I would like to have the master assembly presented in sheet 1 and the modules presented separately in different sheets, all sheets with BOM lists.
Is this possible to do?
(Next step is to export all the BOM lists to an excel document that can be sent to the product co-ordinator to build up the database system)
I have done a new Title Block in our drawing templates.
It only works in New drawings if I open an old drawing I must "Copy/paste" the new Title Block into the browser to the left But I want all our old drawings to use the new Title Block.
Is there a way to have the new Title as default on all old drawings?
What's the best way to ensure that all the drawings for my project are updated if I make changes to the Style settings on one of them? I've been putting every sheet into a single drawing file, but now I'm up to about 50 sheets and it takes about 40 seconds for each save, even if I only made a single minor change since the last save. I don't have any iLogic that could be causing this.
So I'd like to split the sheets up into multiple.dwgs, but I want changes I make my Styles to be reflected in all drawings. Can I create an "external" stye file that all drawings pull their style from? Or will I have to export/import to each drawing every time I make a change?
In Solidworks they had something called custom properties that were generally setup in the models where you had the property names and then values would be filled in to automatically populate drawing titleblocks. I found this, but I can't get the drawing description to keep changes and update the drawing.
View 9 Replies View RelatedHow possible it is to print drawings using a VBA script. I'm interested in forcing print size and the best fit setting.
Searching for printing/plotting yields more results about saving to dwg/pdf than printing to paper.
I am having some issues concerning updating drawings. When a part (.IPT) is placed in a drawing, everything is fine (ie. the views represented in the drawing are up-to-date). Yet, when I make a change to the part (something as small as a dimensional change) it does not translate through to the drawing. This is also the case for iProperties.
I have been playing around for a while now, but have had no luck. The part is also an iPart, but this shouldn't matter.
In the idw of my assembly hidden detail is turned off although there is still sub assemblies shown through the main container. Also when there is a section these sub assemblies are show with dotted lines an overlap components they are behind.
My questions are
1. Why are they showing through components they are behind.
2. Why are the lines dashed
See attached image.